• Journal of the Korean Society of Costume
• /
• v.53 no.7
• /
• pp.37-45
• /
• 2003

This study is to research the changing trends in the trading goods and the cause of the change in the early Chosun dynasty and to find out the influence that the export goods had on the Chosun society. This research demonstrated the costume culture of the early Chosun was affected by the trading trends. The export items of Chosun showed differences in chronological order. They changed from hemp cloth to cotton cloth. The cause of such change in the export items was due to the change in the amount of demand and supply, to products of Chosun. and to social factors. Looking at the amount and items of the export goods to Japan, the amount was huge and the number of trade was a lot. There were several influences that the exporting cotton cloth to Japan had on Chosun's costume culture. First, the export caused the growth of cotton industry through the reinforcement policy. Next, it made the amount of national deposit of cotton cloth exhausted as a result of the increase in the amount of the exporting cotton. It also made worse the dual distribution structure of cotton cloth and the leaning toward bad cotton cloth. And in consequence of the connection between rich merchants and politicians, these social phenomena became worse and worse. And these facts demonstrate that the costume culture of the early Chosun dynasty was affected by the trade between Chosun and Japan. Therefore, to better understand the costume culture of the early Chosun dynasty, I propose to consider the consequences resulted from the trade with Japan.

• Journal of Korea Foundry Society
• /
• v.13 no.4
• /
• pp.369-381
• /
• 1993

Aluminum alloy(AC8A) matrix composites reinforced with SiC particles(10% in vol.) were fabricated by Centrifugal Spray Deposition(CSD) process. The microstructures were investigated in order to evaluate both the mixing mode between aluminum matrix and SiC particles, and the effect of SiC particles on the cooling behaviours of droplets during flight and preforms deposited. A non-continuum mathematical calculation was performed to explain and to quantify the evolution of microstructures in the droplets and preforms deposited. Conclusions obtained are as follows; 1. The powders produced by CSD process showed, in general, ligament type, and more than 60% of the powders produced were about 300 to 850 um in size. 2. AC8A droplets solidified during flight showed fine dendritic structure, but AC8A droplets mixed with SiC particles showed fine equiaxed grain structure, and eutectic silicon were formed to crystallize granularly between fine aluminum grains. 3. SiC particles seem to act as a nucleation sites for pro-eutectic silicon during solidification of AC8A alloy. 4. The microstructure of composite powders formed by CSD process showed particle embedded type, and resulted in dispersed type microstructure in preforms deposited. 5. The pro-eutectic silicon crystallized granularly between fine aluminum grains seem to prohibit grains from growth during spray deposition process. 6. The interfacial reactions between aluminum matrix and SiC particles were not observed from the deposit performs and the solidified droplets. 7. The continuum model seem to be useful in connecting the processing parameters with the resultant microstructures. From these results, it was concluded that the fabrication of aluminum matrix composites reinforced homogeneously with SiC particles was possible.

• Korean Journal of Plant Taxonomy
• /
• v.35 no.4
• /
• pp.313-335
• /
• 2005

Many plants take up soluble silica from the soil, and they deposit in plant tissues. Silica bodies are most commonly found in the leaf epidermis. Silica body is important factor in growth and development of plant. It help to maintain rigidity in stem and linear leaves, and its content may be correlated with resistance to fungal disease. In this study, several morphologically distinctive forms of silica bodies on Cyperaceae in Korea are recognized, which are eventually classified into two groups. Silica body type of first group (Rhynchospora, Fuirena, Scleria, Carex, Eriophorum) is A-type, which is conical in shape. Silica body type of second group (Cyperus, Scirpus, Eleocharis, Fimbristylis, Kyllinga, Bulbostylis, Lipocarpha) is B-type, which is conical in shape with numerous satellite body. These types are consistent enough to use as characters in taxonomic studies within genus. Silica body type may be associated with habitat: the species in dry region have A-type, whereas the species in wet region have B-type. These results suggested that shapes and presence or absence of silica body might be valuable to systematic analysis.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.174-174
• /
• 2010

Gallium Nitride(GaN) attracts great attention due to their wide band gap energy (3.4eV), high thermal stability to the solid state lighting devices like LED, Laser diode, UV photo detector, spintronic devices, solar cells, sensors etc. Recently, researchers are interested in synthesis of polycrystalline and amorphous GaN which has also attracted towards optoelectronic device applications significantly. One of the alternatives to deposit GaN at low temperature is to use Single Source Molecular Percursor (SSP) which provides preformed Ga-N bonding. Moreover, our group succeeds in hybridization of SSP synthesized GaN with Single wall carbon nanotube which could be applicable in field emitting devices, hybrid LEDs and sensors. In this work, the GaN thin films were deposited on c-axis oriented sapphire substrate by MBE (Molecular Beam Epitaxy) using novel single source precursor of dimethyl gallium azido-tert-butylamine($Me_2Ga(N_3)NH_2C(CH_3)_3$) with additional source of ammonia. The surface morphology, structural and optical properties of GaN thin films were analyzed for the deposition in the temperature range of $600^{\circ}C$ to $750^{\circ}C$. Electrical properties of deposited thin films were carried out by four point probe technique and home made Hall effect measurement. The effect of ammonia on the crystallinity, microstructure and optical properties of as-deposited thin films are discussed briefly. The crystalline quality of GaN thin film was improved with substrate temperature as indicated by XRD rocking curve measurement. Photoluminescence measurement shows broad emission around 350nm-650nm which could be related to impurities or defects.

• Korean Journal of Materials Research
• /
• v.22 no.7
• /
• pp.374-378
• /
• 2012

In an effort to overcome the problems which arise when fabricating high-aspect-ratio TSV(through silicon via), we performed experiments involving the void-free Cu filling of a TSV(10~20 ${\mu}m$ in diameter with an aspect ratio of 5~7) by controlling the plating DC current density and the additive SPS concentration. Initially, the copper deposit growth mode in and around the trench and the TSV was estimated by the change in the plating DC current density. According to the variation of the plating current density, the deposition rate during Cu electroplating differed at the top and the bottom of the trench. Specifically, at a current density 2.5 mA/$cm^2$, the deposition rate in the corner of the trench was lower than that at the top and on the bottom sides. From this result, we confirmed that a plating current density 2.5 mA/$cm^2$ is very useful for void-free Cu filling of a TSV. In order to reduce the plating time, we attempted TSV Cu filling by controlling the accelerator SPS concentration at a plating current density of 2.5 mA/$cm^2$. A TSV with a diameter 10 ${\mu}m$ and an aspect ratio of 7 was filled completely with Cu plating material in 90 min at a current density 2.5 mA/$cm^2$ with an addition of SPS at 50 mg/L. Finally, we found that TSV can be filled rapidly with plated Cu without voids by controlling the SPS concentration at the optimized plating current density.

• International Area Studies Review
• /
• v.16 no.3
• /
• pp.239-266
• /
• 2012

The purpose of this paper is to suggest desirable improvement for KRX derivatives market plagued with many problems in spite of its world level of quantitative growth. In order to try to find desirable improvement for KRX derivatives market which has many problems like that, I suggest various ways of improvement for regulatory system in the future in terms of behavioral regulation for investor protection. First of all, in order to relieve speculative tendency of trading, KOSPI200 option market with ATM-oriented option trading needs to be induced from the market in which OTM-oriented option is now trading. So discount or exemption of brokerage fee for ATM trading and the introduction of market-maker for ATM type can be considered. For the protection of individual investors, we suggest feasible plans such as differential regulation between professional and individual investors, consolidation of basic deposit management, and enlargement of opportunities for risk management education & simulation trading.

• Korean Journal of Food Science and Technology
• /
• v.5 no.2
• /
• pp.101-107
• /
• 1973

1) For the purpose of preparation of food and fodder yeasts from nonedible seaweed, two suitable Candida yeasts have been isolated from seaweed compost. 2) They had the ability of fermenting galactose, sucrose and glucose, and could not ferment maltose and mannit, but could assimilate mannit. 3) NaCl concentration from 1 to 2% had no remarkable effect on growth of yeast and the optimum pH was $4{\sim}5$. 4) In the acid hydrolyzate of brown seaweed (Ecklonia cava Kjellman, Sargassum fulvellum AGARDH) an amorphous deposit was produced during storage after neutralization of media and its removal always delayed yeast growth, but addition of $(NH_4)_2SO_4$ and $NaH_2PO_4$ to media could increase the assimilation of reducing sugar and yeast yield. 5) $Co^{60}$ gamma ray irradiation (dose rate : 1 Mrad/hr, BNL shipboard irradiator) of seaweed had not so much effect on the hydrolysis of carbohydrates and nitrogen compounds in seaweed but could increase the yeast production from seaweed hydrolyzate. 6) The yeast yield was $7{\sim}8$ g of dry yeast per 100 g of seaweed by cultivation with jar fermentor.

• Journal of the Korean association of regional geographers
• /
• v.12 no.1
• /
• pp.154-171
• /
• 2006

By comparing to Chinese American banks, this research shows the uniqueness of Korean American banks. This article argues that instead of the cultural attributes and/or informal financial institutions, formal financial institutions, such as the ethnic banks studied here, are responsible for the business success of Asians abroad. However, ethnic banks have different development trajectories depending on their respective ethnic communities. Korean American banks are notably different from Chinese American banks in terms of growth, profitability, and banking strategies. Although both ethnic banks exercise relationship banking strategies in their loan portfolios, their deposit compositions are very different and cause significant differences in financial performance. The focus on business loans and high rates of non-interest deposits allow for higher growth rates in Korean American banks. Therefore, relationship banking does not adequately explain the differences of ethnic banks. This research attempts to understand the underlying factors in choosing banking strategies by mainly focusing on the unique examples found in Korean and Chinese immigrant societies. For Chinese Americans, the heterogeneity of their population composition and foreign influence dominate their bank structures. On the other hand, Korean American homogeneity and business orientation are distinctly different. The influence of Korean capital is not significant when compared to overseas Chinese capital.

• Journal of Korea Water Resources Association
• /
• v.43 no.10
• /
• pp.883-891
• /
• 2010

More recently, there have been significant changes in the forms of channels due to runoff characteristics driven by climate changes and other alterations in basin/channel environments. Particularly, increasing local deposition in major channels is being observed nationwide. Of such phenomena, it is noteworthy that flood-plains show unidirectional growth and lowering of channels within compound channels in the form of a high-flow plain. These changes are supposed to affect management of the river ecology as well as flood control. In this study, the research on channels in Korea confirmed that the phenomenon of local deposition in those channels is actually taking place, rendering a problem to be urgently addressed. Previous studies on bed changes have been focused on low channels based on bed materials distributed over the channels. However, this research has proved that surface-layer deposition of a high-flow plain is closely related with changes in the conditions of ground surfaces and, ultimately, affects the bed of the entire channel as well. According to the intensive research on the condition of the high-flow plain of the mouth of the Han River, the silt deposited in the high-flow plain was the main cause of settlement/growth of vegetation. And this leads to landforming along with woods-forming, disturbing flood control as well as the normal river ecology.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.36 no.4
• /
• pp.601-606
• /
• 2009

Amelogenesis Imperfecta (AI) is a genetic disorder which retards the development of enamel and it can be classified into three types: hypoplastic, hypomaturation, hypocalcified type. This can occur both in deciduous and permanent dentition. A 8 year 8 month old patient with a chief complaints of delayed eruption on upper anteriors, calculus deposit on lower anteriors and anterior openbite visited the clinic. Anteriors had thin layer of enamel and were very narrow. Especially lower anteriors had rough surface and were in bad shape. Teeth were very hypersensitive to thermal changes. Upper and lower first molars showed severe attrition on the occlusal surface. Radiographs also verified hypoplastic enamel in the whole dentition including the teeth in the tooth bud. The patient was diagnosed as hypoplastic AI, and is being treated at the pediathc and prosthodontic department of the Kyunghee dental university hospital. To improve the function, esthetics, hypersensitivity of the AI patients, restorations on the posteriors and the anteriors with oral hygiene instruction are necessary, Constant follow-up check is needed until full growth and after full growth, cooperative care with the other department is needed.