• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.1
• /
• pp.61-69
• /
• 2015

Through Virtual Machine technology(VM), VMs can be packed into much fewer number of physical servers than that of VMs. Since even an idle physical server wastes more than 60% of max power consumption, it has been considered as one of energy saving technologies to minimize the number of physical servers by using the knapsack problem solution based on the computing resources. However, this paper shows that this tightly packed consolidation may not achieve the efficient energy saving. Instead, a service pattern-based VM consolidation algorithm is proposed. The proposed algorithm takes the service time of each VM into account, and consolidates VMs to physical servers in the way to minimize energy consumption. The comprehensive simulation results show that the proposed algorithm gains more than 30% power saving.

• 한국가시화정보학회:학술대회논문집
• /
• 2006.12a
• /
• pp.17-20
• /
• 2006

Passenger safety is fundamental factor in automobile. Among much equipment for passenger safety, the air bag system is the most fundamental and effective device. Beside of the front air bag system which installed on most of all automobiles, a curtain-type air bag is increasingly adapted in deluxe cars fur protecting passengers from the danger of side clash. Curtain type airbag system consists of inflator housing, fill hose, curtain airbag. Inflator housing is a main part of the curtain-type air bag system for supplying high-pressure gases to deploy the air bag-curtain. Fill hose is a passageway to carry the gases from inflator housing to each part of curtain airbag. Therefore, it is very important to design the vent holes of fill hose for good performance of airbag deployment. But, the flow information from vent holes of fill hose is very limited. In this study, we measured instantaneous velocity fields of a high-speed flow ejecting from the vent holes of fill hose using a dynamic PIV system. From the velocity Held data measured at a high frame-rate, we evaluated the variation of the mass flow rate with time. From the instantaneous velocity fields of flow ejecting from the vent holes in the initial stage, we can see a flow pattern of wavy motion and fluctuation. The flow ejecting from the vent holes was found to have very high velocity fluctuations and the maximum velocity was about 480m/s at 4-vent hole region. From the mass flow rate with time, the accumulated flow of 4-vent hole has occupied about 70% of total flow rate.

• The Research Journal of the Costume Culture
• /
• v.31 no.1
• /
• pp.124-140
• /
• 2023

This study analyzes traditional women's Hu costumes of the Tang dynasty, and deploys a creative fashion design to converge contemporary and traditional styles. In this costume, women wear a robe with striped or plain patterns in the lower part of the pants, and it appears frequently in red and yellow colors. Depending on the sleeve, it is either a round collar or a turn down collar robe. In the Hu hat, the huntuomao and juanyanxumao were leather and mili and weimao were used to prevent the sand from flowing. This study uses the CLO 3D program with the "moment" theme based on the Hu costume for women to deploy 4 pairs of fashion design and to produce works for 2 pairs. The 3D virtual clothing program demonstrates important effects in design deployment and pattern arrangement through its efficiency and convenience of clothing production. The CLO 3D program was closely combined with the 2D design and the 3D affect, and it heightened the efficiency in saving the processing time and energy of the sample clothes. Through facilitating the 3D digital fashion design, the production may reduce time needed and contribute to an effective economy, and it may compare digital fashion design to actual products as well as illustrate the potential of digital fashion design.

• Journal of Fashion Business
• /
• v.20 no.4
• /
• pp.189-206
• /
• 2016

A breast model was for the human body was devised by studying a body scan and human body index of a desirable breast type. Thus, when manufacturing various 3D models, these results can accordingly become a fundamental basis for realizing a desirable breast model. This study aims to provide a basic data for designing the cup patterns of brassieres in order to improve the function and wearing comfort. The comfort of three kinds of brassieres were compared: one manufactured by the actual measured size; another manufactured as per the ratio of desirable upper and lower breast lengths; and the third manufactured by the 3D model attained by the desirable human body ratio. In this study, we suggest a process for realizing the desirable breast model using the ratio of bust breadth and waist front length, which are the components for deciding the appropriate position and size of breast, and which are easy to measure. The ideal breast shape is an equilateral triangle formed by connecting the nipple with the center of the clavicle. After deciding the interval between the nipples, this value can be used to configure the locations of nipples by drawing a tangent, with equal length, from the anterior neck point (which is the center of clavicle) to the nipple. Also, since inside points of breast do not exist, the outer point of breast, upper point of breast, and below point of breast on the same plane, and the depths from the nipple point to the respective points, are applied to simulate a 3D image, by modifications along the x, y, and z axes. Depending on the type of breast, the length from the center of shoulder to the nipple, the diameter of breast, upper length of breast, and the position of nipple, are different. In conical or protruding breast, the wearing sensation is better when the nipple point of brassiere was lifted, by modifying the upper and lower lengths of breast. Considering the wearing sensation and function of a brassiere, it was better to leave the wearer's size as it is and use a pad within the same cup, rather than increase the basal area of the breast in order to increase the volume.

• (The)Study of the Eastern Classic
• /
• no.49
• /
• pp.393-430
• /
• 2012

In this paper, Bowen's family therapy from the perspective of the theory, narrative analysis of Korean novels, three Regis - tration Subsection.Bowen's description of the individual's behavior is causing problems within the family of anxiety and self-differentiation using two variables. The home if problems or conflicts expressed in these works, the figures showed that the undifferentiated ego at the center of the problem. Undifferentiated ego character felt extreme anxiety when their alienation from the relationship of the family-oriented jeokjangja Undifferentiated ego to relieve anxiety and to consolidate their position in the family relationship, so people were strongly united with each other. Sohyunseongnok, Chossisamdaerok series structures and patterns of a series of domestic problems occur, "mother and son, self-differentiation self undifferentiated undifferentiated ego and self-differentiation mother son, mother and self-ego undifferentiated undifferentiatedcan be subdivided into the son '.Established a symbiotic relationship between them and the U.S. established the presence of a pattern, healer, depending on the deployment method depends narrative. And is divided accordingly, self-determination and to the Son, a son, a son to be born again through repentance of the execution. Depending on the presence or absence healer than what was described on the deployment structure differs. Undifferentiated ego and self undifferentiated mother son family therapist within the family, the problem is solved. Son, a son to repent and be born again, and that caused the problem. Ego Undifferentiated mother and son self-differentiation, undifferentiated ego and self-differentiation mother son home my healer in the absence son committed suicide and executions each tragedy occurred. Personal level, but occurred at home conflicts or problems about this when analyzing the Three-generation stories of the Joseon Dynasty, by applying the theory of Bowen's Family Therapy view dimension in the relationship between family were. Toughness or desire of any one individual, but serious conflicts and problems within the family, the institution of the family itself is the root cause was. And was able to reveal aspects of narrative flow, depending on the presence or absence of family therapists vary significantly depending on his role in the rest of the family comfort and peace determines whether the Three-generation stories of the Joseon Dynasty, received an important narrative of men and axis formation. In a gauze-like situation of this problem in the Three-generation stories of the Joseon Dynasty, a personal desire or toughness in confined without the dimension of the entire family. And extrinsic psychological approach against the background of the wall in the main narrative of the sufferings of women of Korean novels, approached significance.

• Journal of Energy Engineering
• /
• v.26 no.4
• /
• pp.107-117
• /
• 2017

Since South Korea started to apply Renewable Portfolio Standard (RPS) in 2012, there have been huge investment for deploying renewable technologies. Recently, the government determined to incentivize battery energy storage system(BESS) with renewable generations in order to induce the improvement of dispatching capability. In this paper, the annual pattern of PV generation based on actual generation data in South Korea is analyzed and the duration curve of capacity factor is proposed in order to provide the simplified analyzing methodology of present support policy for additional BESS installation for decision maker who is responsible for supply and demand planning. With suggested methodology, the range of appropriate BESS size with respect to the variation of system marginal price(SMP) and renewable energy certificate(REC) price can be derived briefly, and decision makers easily evaluate the effect of support scheme. Current policy for BESS installation support present additional BESS-related installation policy may give incentives to developers partially, however, the dependence between BESS size and benefit components (SMP and REC) can limit the deployment of the various portfolios of the BESS. Therefore, when improving the current policy in future, addressing the dependence between the technical aspects of battery size and the benefit components separately by the technical and economical parts is needed to set the suitable compensation rules for the renewable generation and BESS.