• Journal of the Korea Concrete Institute
• /
• v.14 no.6
• /
• pp.813-822
• /
• 2002

The purpose of the present study is first to refine the mathematical material models for moisture and temperature distributions in early-age concrete and then to incorporate those models into finite element procedure. The three dimensional finite element program developed in the present study can determine the degree of hydration, temperature and moisture distribution in hardening concrete. It is assumed that temperature and humidity fields are fully uncoupled and only the degree of hydration is coupled with two state variables. Mathematical formulation of degree of hydration Is based on the combination of three rate functions of reaction. The effect of moisture condition as well as temperature on the rate of reaction is considered in the degree of hydration model. In moisture transfer, diffusion coefficient is strongly dependent on the moisture content in pore system. Many existing models describe this phenomenon according to the composition of mixture, especially water to cement ratio, but do not consider the age dependency. Microstructure is changing with the hydration and thus transport coefficients at early ages are significantly higher because the pore structure in the cement matrix is more open. The moisture capacity and sink are derived from age-dependent desorption isotherm. Prediction of a moisture sink due to the hydration process, i.e. self-desiccation, is related to autogenous shrinkage, which may cause early-age cracking in high strength and high performance concrete. The realistic models and finite element program developed in this study provide fairly good results on the temperature and moisture distribution for early-age concrete and correlate very well with actual test data.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.20-20
• /
• 2008

최근 LEDs가 동일 효율의 전구에 비해 에너지 절감 효과 크며 신뢰성이 뛰어나다기 때문에 기존 광원을 빠르게 대체해 나가고 있다. 특히 자외선 파장을 가지는 LEDs는 발열이 낮아 냉각장치가 필요 없으며, 수명이 길어 기존 UV lamp에 비해 많은 장점을 가지고 있기 때문에 많은 관심을 밭고 있다. 그럼에도 불구하고 자외선 LEDs는 제조 단가가 높고 power가 낮아 소요량이 많은 등 아직 해결해야 할 부분이 많기 때문에 이를 해결하기 위해 여러가지 재료와 다양한 구조가 고려되고 있다. 그 중 ZnO는 II-VI족 화합물 반도체로써 UV영역의 넓은 밴드갭(3.37eV)을 가지는 투명한 재료이다. 특히 ZnO는 60meV의 큰 엑시톤 결합에너지를 가지며, 가시광 영역에서 높은 투과율을 가지고, 상온에서 물리적, 화학적으로 안정하기 때문에 UV sensor, UV laser, UV converter, UV LEDs 등 광소자 분야에서 연구가 활발히 진행되고 있다. ZnO가 광소자의 발광재료로써 높은 효율을 얻기 위해서는 결정성을 높여 내부 결함을 감소시키며, 발광 면적을 높일 수 있는 구조가 요구된다. 특히 MOCVD 법으로 성장한 나노막대는 에피성장되어 높은 결정성을 기대할 수 있으며, 성장 조건을 조절함으로써 나노막대의 aspect ratio와 밀도 제어할 수 있기 때문에 표면적을 효과적으로 넓혀 높은 발광효율을 얻을 수 있다. 본 실험에서는 MOCVD 법으로 실리콘과 사파이어 기판 위에 다양한 성장 온도를 가진 나노구조를 성장 시키고 온도에 따른 형상 변화와 특성을 평가하였다. ZnO 의 성장온도가 약 $360^{\circ}C$ 일 때, 밀도가 조밀하고 기판에 수직 배열한 균일한 나노막대가 성장되었으며 우수한 결정성, 광학적 특성이 나타남을 SEM, TEM, PL, XRD를 사용하여 확인하였다.

• Elastomers and Composites
• /
• v.46 no.1
• /
• pp.37-44
• /
• 2011

Effect of organo nanoclay (Cloisite 30B) on the polyesterification of adipic acid (AA) with diethylene glycol(DEG) was investigated with p-toluene sulfonic acid (p-TSA) (Br${\phi}$nsted acid) and butylchlorotin dihydroxide (Lewis acid) catalyst at 383 and 423 K. The initial [OH]/[COOH] molar ratio was two and the concentration of the catalysts in the reactants was 0.14 mol% based on the total reactants. The kinetics of the polyesterification was interpreted with the conversion data that was calculated from the acid values of the reactant-product mixture. The reaction rate of the polyesterification, which was catalyzed with p-TSA, exhibited the second-order dependency on AA concentration. When Butylchlorotin dihydroxide was used, the reaction rate revealed the first-order dependency on AA concentration. The activation energy of the reactions catalyzed with p-TSA and Butylchlorotin dihydroxide were calculated at 42.2 and 63.8 kJ/mol, respectively. Addition of 5 wt% Cloisite 30B to the reactant significantly diminished the activity of p-TSA, so the reaction rate decreased and the activation energy was calculated at 72.9 kJ/mol. Butylchlorotin dihydroxide catalyst maintained its activity regardless of the addition of Cloisite 30B to the reactant and the activation energy was calculated to 61.8 kJ/mol. Lewis acid catalyst, butylchlorotin dihydroxide, was more effective than Br${\phi}$nsted acid catalyst for the esterification of AA with DEG.

• Proceedings of the KSEEG Conference
• /
• 2002.10a
• /
• pp.53-67
• /
• 2002

As in the past, we are concerned today with the magnitudes of mineral resources and the adequacy of these resources to meet future needs. In looking at global resource issues, we should consider the need for the resource, its supply, and the environmental consequences of using it. The need for a resource can become a resource dependency, specially as the global population expands and each of us becomes Increasingly dependent upon hundreds of natural materials. Therefore, our great mineral consumption makes the human population a true “Geologic Force”, which will be even more significant in the future when the global population is projected to reach alarming proportions. Although our supplies of mineral resources probably will be sufficient for the 21st century, the uneven distribution of minerals in the Earth's crust almost certainly will continue to be a major problem. The most likely result will be major shifts in both prices and sources of supply of many mineral resources. As for energy resources, we must avoid an obsessive dependency on one fuel and expand instead to other energy resources. Finally, because the use of resources affects the environment, we need to focus on resource exploitation and global pollution, particularly in regard to ground water and arable land. We must manage our resources so as to be in balance with our environment. And the accelerated industrialization of South Korean economy over the last three decades has resulted in the mass consumption of mineral commodities. South Korea has around 50 useful mineral commodities for the mineral industry, among 330 kinds of minerals described. The component ratio of the mining industry sector of the gross national production(GNP) in South Korea dropped from 1.2% in 1971 to 0.34% in 1997 due to the rapid growth of other industries in the country. During the period from 1971 to 1997, the average growth rate of mineral consumption in South Korea was 9.13% yearly and that of GMP per capita was 14.97%. The mineral consumptions per capita showed a continual increase during the last 30 years as follows(parenthesis: GW per capita); 0.99 metric tons in 1997($289), 3.83 metric tons in 1989($5, 210), 6.11 metric tons in 1995 ($10, 037), and 6.66 metric tons in 1997($9, 511). The total amount of mineral consumption in South Korea was 33 million tons of 32 mineral commodities in 1971, and 306 million metric tons of 47 mineral commodities in 1997.

• Journal of the East Asian Society of Dietary Life
• /
• v.23 no.6
• /
• pp.723-732
• /
• 2013

We investigated the inducing effects of Rubus coreanus extract (RCE) on apoptosis and its related gene expressions in human breast cancer cells. MDA-MB-231 cells were cultured in the presence of 0, 200, 300, and $400{\mu}g/mL$ RCE for 24h. MTT assay demonstrated that relative cell viability measured a decrease in a dose-dependent manner (p<0.05). This dependency was also found in the increasing levels of cell death by a dual staining with Hoechst 33322 and propidium iodide (p<0.05). These close associations was also observed by different stages of apoptotic processes, as shown by an Apoptosis Detection Kit. To determine whether the alterations in such cell activities obtained above cause the induction of apoptotic genes, PT-PCR was performed expressions of both Bcl-2 and Bax mRNAs. The Bcl-2/Bax ratio which is an important indicator of apoptosis, was found to have significantly decreased dose dependence (p<0.05). Western blot analysis also demonstrated that Caspase-3 significantly increases in a dose-dependent manner (p<0.05) in addition to similar alterations of other proteins examined. Taken these results together, the ethanolic RCE used induces a reduction in cell viability along with increased membrane permeability. This leads to a precautious apoptotic process and, subsequently, cell death through the apoptotic pathway involving Bax and Caspase-3 in human breast cancer MDA-MB-231 cells.

• The Korean Journal of Pain
• /
• v.33 no.4
• /
• pp.359-377
• /
• 2020

Background: This study investigated whether current smoking and a higher nicotine dependency were associated with chronic low back pain (LBP), lumbar related leg pain (sciatica) and/or radicular neuropathic pain. Methods: A cross-sectional study was conducted on 150 patients (mean age, 60.1 ± 13.1 yr). Demographic data, the International Association for the Study of Pain (IASP) neuropathic pain grade, STarT Back tool, and the Fagerström test were completed. A control group (n = 50) was recruited. Results: There was a significant difference between current smokers and nonsmokers in the chronic LBP group in the mean pain score (P = 0.025), total STarT Back score (P = 0.015), worst pain location (P = 0.020), most distal pain radiation (P = 0.042), and in the IASP neuropathic pain grade (P = 0.026). There was a significant difference in the mean Fagerström score between the four IASP neuropathic pain grades (P = 0.005). Current smoking yielded an odds ratio (OR) of 3.071 (P = 0.011) for developing chronic LBP and sciatica, and an OR of 4.028 (P = 0.002) for obtaining an IASP "definite/probable" neuropathic pain grade, for both cohorts. The likelihood for chronic LBP and sciatica increased by 40.9% (P = 0.007), while the likelihood for an IASP neuropathic grade of "definite/probable" increased by 50.8% (P = 0.002), for both cohorts, for every one unit increase in the Fagerström score. Conclusions: A current smoking status and higher nicotine dependence increase the odds for chronic LBP, sciatica and radicular neuropathic pain.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.7
• /
• pp.1937-1940
• /
• 2010

Ionic liquids with halide anions were prepared and the dependency of halide anions on the $SO_2$ solubility of ILs was investigated. The study shows that the $SO_2$ solubility of ionic liquids lies in the range 1.91~2.22 $SO_2$/ILs mol ratio. $SO_2$ solubility in ionic liquids with varying halide anions follows the order Br > Cl > I. Theoretical investigation was also conducted at the B3LYP level using the Gaussian 03 program. From the theoretical consideration of the interaction between $SO_2$ and [EMIm]X (where X = Cl, Br, and I), it has been proposed that primary interaction of halide occurs with $C_2$-H of the imidazolium and S of $SO_2$. Experimental results further shows that the absorption and desorption process of $SO_2$ in ILs was reversible by the three cycles of the absorption at $50^{\circ}C$ and desorption at $140^{\circ}C$. The reversibility of $SO_2$ absorption was confirmed by FT-IR studies.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.7 no.6
• /
• pp.1463-1479
• /
• 2013

In this paper, we propose an unequal protection physical coding sub-layer (PCS) forward error correction (FEC) scheme for efficient and high-quality transmission of video data over optical access networks. Through identifying and resolving the unequal importance of different video frames and passing this importance information from MAC-layer to PCS, FEC scheme of PCS can be adaptive to application-layer data. Meanwhile, we jointly consider the different channel situations of optical network unit (ONU) and improve the efficiency of FEC redundancy by channel adaptation. We develop a theoretical algorithm and a hardware method to achieve efficient FEC assignment for the proposed unequal protection scheme. The theoretical FEC assignment algorithm is to obtain the optimal FEC redundancy allocation vector that results in the optimum performance index, namely frame error rate, based on the identified differential importance and channel situations. The hardware method aims at providing a realistic technical path with negligible hardware cost increment compared with the traditional FEC scheme. From the simulation results, the proposed Channel and Application-layer data Adaptation Unequal Protection (CAAUP) FEC scheme along with the FEC ratio assignment algorithm and the hardware method illustrates the ability of efficient and high-quality transmission of video data against the random errors in the channel of optical access networks.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.33 no.6
• /
• pp.403-410
• /
• 2009

This paper proposes a new approach to find the optimum ratios between sizes of the heat exchangers of the heat recovery steam generator (HRSG) system with limited size to maximize the efficiency of the steam turbine (bottom) cycle of combined cycle power plants (CCPP), but without performing the bottom cycle analysis. This could be achieved by minimizing the unavailable exergy (the sum of the destroyed and the lost exergies) resulted from the heat transfer process of the HRSG system. The present approach is relatively simple and straightforward because the process of the trial-and-error method, typical in performing the bottom cycle analysis for the system optimization, could be avoided. To demonstrate the usefulness of the present method, a single-stage HRSG system was chosen and the optimum evaporation temperature was obtained corresponding to the condition of the maximum useful work. The results show that the optimum evaporation temperature based on the present exergy analysis appears similar to that based on the bottom cycle analysis. Also shown is the dependency of size (NTU) ratios between the heat exchangers on the inlet gas temperature, which is another important factor in determining the optimum condition once overall size of the heat recovery steam generator is given. The present approach turned out to be a useful tool for optimization of the singlestage HRSG systems and can easily be extended to multi-stage systems.

• Journal of Korea Society of Industrial Information Systems
• /
• v.9 no.3
• /
• pp.64-70
• /
• 2004

Korean and Japanese have same structure of sentences because they belong to same family of languages. So, The transfer driven machine translation is most efficient to translate each other. This paper introduce a method which creates a transfer dictionary for Token Based Transfer Driven Koran-Japanese Machine Translation(TB-TDMT). If the transfer dictionaries are created well, we get rid of useless effort for traditional parsing by performing shallow parsing. The semi-parser makes the dependency tree which has minimum information needed output generating module. We constructed the transfer dictionaries by using the corpus obtained from ETRI spoken language database. Our system was tested with 900 utterances which are collected from travel planning domain. The success-ratio of our system is $92\%$ on restricted testing environment and $81\%$ on unrestricted testing environment.