• 제목/요약/키워드: Dentine

검색결과 69건 처리시간 0.029초

Amputation level for hard tissue formation in pulp with tetracalcium / dicalcium phosphate compound.

  • Yoshikawa, M.;Toda, T.
    • 대한치과보존학회:학술대회논문집
    • /
    • 대한치과보존학회 2001년도 추계학술대회(제116회) 및 13회 Workshop 제3회 한ㆍ일 치과보존학회 공동학술대회 초록집
    • /
    • pp.566.1-566
    • /
    • 2001
  • The most desirable healing process for endodontic therapy is apical closure by hard tissue such as dentine or cementum. Then, we estimated hard tissue conductivity of tetracalcium phosphate (4CP)/dicalcium phosphate (2CP) compound using mandibular first molars of SD rats. Residual pulp responses to the calcium phosphate compound were examined at several amputation levels of pulp. 2CP was purchased and passed through a $32-\mu\textrm{m}$ sieve. 4CP was obtained from a stoichiometric mixture of 2CP and calcium carbonate (Mol ratio: Ca/P=2.0) by the dry synthetic method at 1, 400(C for 8 hours.(omitted)

  • PDF

Interfacial ultrastructure of the AQ Bond Plus

  • Haruyama, Chikahiro;Amgai, Tetsuya;Sugiyama, Toshiko;Muto, Yoshitake;Takase, Yasuaki;Hirai, Yoshito
    • 대한치과보존학회:학술대회논문집
    • /
    • 대한치과보존학회 2003년도 제120회 추계학술대회 제 5차 한ㆍ일 치과보존학회 공동학술대회
    • /
    • pp.601-601
    • /
    • 2003
  • AQ Bond Plus has the function of self-etching priming adhesive, which can be applied by single coating without second coating, being different from conventional AQ bonds. Moreover, because the absorption range of light became wider, the bond can comply with any visible light curing units. Thus, the bond can produce an unified form between the dentine layer with impregnated resin of good quality and the thin and hard film characteristically. In this study, we investigated the junctional conditions of AQ Bond Plus, using a scanning electron microscope (SEM).(omitted)

  • PDF

상악 우측 유전치부에 발생한 삼중치 : 증례 보고 (Triplication of upper right primary anterior teeth : a case report)

  • 배상용;이제우;라지영
    • 대한치과의사협회지
    • /
    • 제57권10호
    • /
    • pp.588-594
    • /
    • 2019
  • The fusion is an anomalous union of two or more tooth germ at some stage in the development process resulting in a decreased number of teeth in the dental arch. Fusion is common odontogenic anomaly but triplication of primary teeth is a rare phenomenon. We report a case of a 3 - year - old girl who visited our clinic for the pain on maxillary anterior tooth. The patient was diagnosed by the fusion of a the maxillary primary right central and lateral incisor with a supernumerary tooth and caries of dentine. And then, Endodontic treatment and composite resin restoration were performed on the triple teeth. After follow-up of 6 months period, there was no marked complications.

  • PDF

지르코니아의 표면처리 방법에 따른 압축강화형 복합레진 ($TESCERA^{TM}$ ATL)전장의 결합강도 (Shear Bond Strength of Composite Resin ($TESCERA^{TM}$ ATL) Veneering on Zirconia Surface with Various Surface Treatments)

  • 박수정;이성복;이석원;안수진;임호남
    • 구강회복응용과학지
    • /
    • 제27권1호
    • /
    • pp.1-13
    • /
    • 2011
  • 압축강화형 복합레진($TESCERA^{TM}$ ATL)을 지르코니아 framework에 효과적으로 전장하기 위하여, 표면처리 방법을 여러 가지로 달리한 지르코니아 표면에 압축강화형 복합레진을 전장하여 전단결합강도를 실험적으로 비교하였다. 지르코니아의 표면적 증가를 도모하기 위해 최종소결 전 지름 1.1mm round bur를 사용하여 지르코니아 표면에 pockmark (honey-comb concept)를 형성하였고, 화학적으로는 Primer (Zr-plus primer, Bisco, Inc., Shaumurg, USA)를 도포하여 결합강도 증가를 도모하였다. 지르코니아에 porcelain을 적층하여 대조군으로 삼고 각 군을 5도와 55도 사이에서 10,000회 thermocycling시켜 simulated aging 결과 또한 비교하였다. 전단결합강도를 측정하였고 주사전자현미경을 통해 파절단면을 관찰하였다. Pockmark를 형성한 실험군에 압축강화형 복합레진($TESCERA^{TM}$ ATL) 전장 시 도재 전장과 유사한 전단결합 강도를 발휘하였으며,(p>0.05) 동일 시편을 24시간 수중 보관했을 때에 비해 thermocycling 했을 때의 전단결합강도가 약간 감소하였으나 유의차는 보이지 않았다.(p>0.05) 지르코니아 표면에의 Primer의 도포가 압축강화형 복합레진 ($TESCERA^{TM}$ ATL)과의 결합강도를 증가시키지는 못하였다. 지르코니아 소결 전 표면에 pockmark를 주어 표면적을 증가시키고 요철의 효과를 주는 것은 $TESCERA^{TM}$ ATL과의 결합강도를 증가시켰으며, 이는 임상적으로 지르코니아-포세린의 결합강도에 필적하는 강하고 내구성 있는 결합강도를 가져온다고 판단되었다.

지각과민 처치제 후 접착레진 처리가 상아질 투과도에 미치는 영향 (The effects of desensitizing agents, bonding resin and tooth brushing on dentin permeability, in vitro)

  • 홍승우;박노제;박영범;이근우
    • 대한치과보철학회지
    • /
    • 제52권3호
    • /
    • pp.165-176
    • /
    • 2014
  • 목적: 상아질 지각과민증의 치료를 위해 사용되는 지각과민 처치제의 효과는 일시적인 것으로 보이며 이는 상당부분 칫솔질에 의한 마모소실로 판단된다. 지각과민 처치제의 칫솔질에 의한 마모를 감소시키기 위해 bonding resin을 지각과민 처치제에 추가 도포하여 칫솔질 시행 후 상아질 투과도의 변화에 대해 연구하였다. 재료 및 방법: 우식이 없는 치아를 이용하여 1 mm 두께의 치관부 상아질 디스크를 제작한 다음, All-Bond 2$^{(R)}$, Seal & Protect$^{(R)}$, Gluma$^{(R)}$, MS Coat$^{(R)}$의 4 종류의 지각과민 처치제만 처리한 시편과 Dentine/Enamel Bonding Resin$^{(R)}$ (Bisco Inc.)을 추가로 도포한 시편에 대해 처리하기 전과 처리한 후, 1주(왕복 140회), 2주(왕복 280회), 6주(왕복 840회)에 해당하는 칫솔질을 적용한 후에 측정한 hydraulic conductance (Lp)와 주사 전자 현미경 사진을 비교 분석하였다. 결과: 지각과민 처치제 만을 처리한 군과 bonding resin (Dentine/Enamel Bonding Resin$^{(R)}$)을 추가 도포한 군 모두에서 처리 직후 hydraulic conductance가 급격히 감소하였다. 지각과민 처치제만 처리한 군과 bonding resin을 추가 도포한 군 간의 hydraulic conductance를 비교한 결과 All-Bond 2$^{(R)}$, Gluma$^{(R)}$, MS Coat$^{(R)}$와 bonding resin을 도포한 군에서는 1주(왕복 140회), 2주(왕복 280회), 6주(왕복 840회)의 칫솔질을 시행한 후 hydraulic conductance가 지각과민 처치제만 도포한 군에 비해 현저히 낮았고, Seal & Protect$^{(R)}$ 에서는 6주(왕복840회)의 칫솔질을 시행한 후에만 같은 결과를 보였다. 주사 전자 현미경 관찰에서 지각과민 처치제만 처리한 군과 bonding resin을 추가로 도포한 군 모두에서 처리 직후에 상아세관이 완전히 폐쇄되거나 일부만 폐쇄되어 상아 세관의 내경이 감소된 양상을 볼 수 있었으나, 6주(왕복 840회) 칫솔질 시행 후에는 bonding resin을 추가 도포한 군에서만 현저하게 폐쇄 또는 내경이 감소된 상아세관이 관찰되었다. 결론: 지각과민 처치제 처리 후 bonding resin (Dentine/Enamel Bonding Resin$^{(R)}$, Bisco Inc.)을 추가 도포하는 것이 지속적인 상아세관 폐쇄에 효과적임을 알 수 있었다.

상아질과 Gutta-Percha에 대한 근관충전용 Sealer의 결합강도의 측정 (MEASUREMENT OF ADHESION OF ROOT CANAL SEALER TO DENTINE AND GUTTA-PERCHA)

  • 허미자;유미경;이세준;이광원
    • Restorative Dentistry and Endodontics
    • /
    • 제28권1호
    • /
    • pp.89-99
    • /
    • 2003
  • The purpose of this study was to investigate the bonding of resin- based root canal sealer, AH26 when the sealer was applied as a thin layer between dentine and gutta-percha surface. In this study forty non-caries extracted human molars and resin-based root canal sealer(AH 26, DeTrey/Dentsply, Germany) were used. Disks of gutta-percha, 6mm in diameter.6mm thick (Diadent/Dentsply, Korea) for thermoplastic obturation were used and dentin surfaces were treated with 2% NaOCl(Group 1) or 2%NaOCl+17% EDTA(Group 3). Disks of gutta-Percha, 6mm in diameter.6mm thick (Diadent/Dentsply, Korea) for conventional obturation were used and dentin surface were treated with 2% NaOCl(Group 2) or 2%NaOCl+17% EDTA(Group 4). Enamel was removed by a horizontal section 1mm below the deepest portion of the central occlusal groove by using a watercooled low speed diamond saw. A second horizontal section was done around cementoenamel junction. Exposed dentin surface was cut to approximately $8{\times}8{\;}mm$ rectangular shape and was ground against 320, 400, 600 grade silicon carbide abrasive paper serially. After grinding, the dentine surface were soaked in a solution of 2% NaOCl for 30 minutes and twenty of specimens were treated with 17% EDTA solution for 1 minute. The treated specimens were washed and dried, Root canal sealer, AH26 was prepared according to the manufacture's instructions The Gutta-percha and dentin surface were coated with a thin layer of the freshly mixed seal or. The specimens were left overnight at room temperature. After their initial set, they were transferred to an incubator at $37$^{\circ}C$ for 72 h. After 72 hours, resin blocks were made. The resin block was serially sectioned vertically into stick of $1{\cdot}1mm$. Twenty sticks were prepared from each group. After that, tensile bond strength f3r each stick was measured with Microtensile Tester Failure patterns of the specimens at the interface between gutta-percha and dentin were observed under the SEM(x1000) and Stereomicroscope (LEICA M42O, Meyer Inst., TX U.S.A) at 1.25 x25 magnification. The results were statistically analysed by using a One-way ANOVA and Tukey's test. The results were as follows; 1. Tensile bond strengths($mean{\pm}SD$) were expressed with ascending order as follows: Group 1, $3.09{\pm}$ 1.05Mpa : Group 2, $6.23{\pm}1.16MPa$ : Group 3, $7.12{\pm}1.07MPa$ : Group 4, $10.32{\pm}2.06MPa$. 2. Tensile bond strengths of the group 2 and 4 used disks of gutta-percha for conventional obturation were significantly higher than that of the group 1 and 3 used fir thermoplastic obturation. (p < 0.05). 3. Tensile bond strengths of the group 3 and 4 treated with 2% NaOC1+17% EDTA were significantly higher than that of the group 1 and 2 treated with 2% NaOCl. (p < 0.05). 4. In analysis of failure patterns at the interface between sealer and gutta-percha, there were observed 49 (61%)cases of adhesive failure patterns and 31 (39%) cases of mixed failures patterns.

치면열구전색제의 열구 침투에 primer의 효과 (THE EFFECT OF PRIMER ON PENETRATION OF SEALANT)

  • 정혜선;이제호;최형준;최병재
    • 대한소아치과학회지
    • /
    • 제26권2호
    • /
    • pp.416-426
    • /
    • 1999
  • 본 연구의 목적은 치면열구전색제 수복시에 상아질 접착제의 primer 도포의 치면열구전색제 열구 침투도 향상 효과를 확인하는 것으로, 발거된 영구 구치상에서 통상적으로 치면열구전색제를 도포한 대조군과 $Scotchbond^{TM}$ Multi-Purpose system과 $All-Bond^{(R)}$ 2 system의 primer 도포 후에 치면열구전색제를 도포한 실험군들의 열구 기저부까지 전색제 침투 성공율을 비교하여 다음과 같은 결론을 얻었다. 1. $Scotchbond^{TM}$ Multi-Purpose system과 $All-Bond^{(R)}$ 2 system의 primer 를 사용한 군의 열구 기저부까지 치면열구전색제 침투 성공율은 primer를 사용하지 않은 대조군보다 높았으나 통계학적으로 유의성 있는 차이는 없었다(p>0.05). 2. 열구 깊이와 폭 및 '깊이/폭' 값은 열구 기저부까지 전색제 침투성공률에 대하여 통계학적으로 유의성 있는 효과를 나타내었다(p<0.05). 3. 열구 기저부까지 전색제 침투 성공률은 열구 깊이가 $25{\mu}m$ 증가할 때마다 약 0.9배로 감소하였고, 열구 입구의 폭이 $25{\mu}m$ 증가할 때마다 약 1.1배로 증가하였으며, 열구의 '깊이/폭' 비율이 1 증가할 때마다 약 0.6배로 감소하였다.

  • PDF

근관치료 시 초음파 세정 기술을 이용한 잔사 제거의 효율성 (The efficacy of ultrasonic irrigation technique on debris removal during root canal treatment)

  • 김정현;김진우;조경모;박세희
    • 구강회복응용과학지
    • /
    • 제33권2호
    • /
    • pp.97-105
    • /
    • 2017
  • 목적: Passive irrigation (PI)과 Passive ultrasonic irrigation (PUI)의 상아질 잔사 제거 효율성을 비교하는 것이다. 연구 재료 및 방법: 16 mm 길이로 표준화된 하악 소구치 치근을 근관 확대 후 종단으로 이등분 하였다. 분리된 한쪽 상아질벽에는 길이 4 mm, 너비 0.2 mm, 깊이 0.5 mm의 표준화된 구를 형성하였고, 반대쪽에는 직경 0.3 mm, 깊이 0.5 mm인 3개의 반구 형태의 함요를 형성하였다. 각 구와 함요에는 NaOCl과 혼합된 상아질 잔사로 채우고, 퍼티 인상재를 사용하여 재조합하였다. Group 1은 PI를 이용하고 Group 2는 PUI를 이용하여 각 근관내를 세정하였다. 현미경과 디지털카메라로 절편의 근관벽을 촬영하고, 구와 함요에 잔존하는 상아질 잔사의 양을 scoring system을 이용하여 평가하였다. 결과: 근관의 중앙 1/3에서 group 1이 group 2에 비해 잔사를 더 많이 제거하였지만, 치근단부에서는 유의한 차이가 없었다. 결론: 하악 소구치에서 근관에 기구가 닿지 못하는 부위를 세정시, 근관의 중앙 1/3에서 PUI를 사용하는 것이 PI에 비해 상아질 잔사의 제거 효율이 우수했지만, 치근단부에서는 PUI와 PI의 유의한 차이가 없었다.

과민치아에 대한 904nm GaAs 반도체레이저의 효과 (Effects of GaAs (904 nm) Low Level Laser Therapy on Dentin Hypersensitivity)

  • 원태희;김기석
    • Journal of Oral Medicine and Pain
    • /
    • 제36권4호
    • /
    • pp.215-224
    • /
    • 2011
  • 본 연구의 목적은 과민치아에 904 nm GaAs 다이오드 레이저를 조사하여 치료효과를 연구하여 과민 치아의 치료에 이러한 저수준 레이저 요법을 임상적으로 사용할 수 있는지 가능성을 파악하는 데 있다. 단국대학교 치과대학 부속치과병원 안면 동통 구강내과에 내원한 환자를 대상으로 하였으며, 각 환자는 치경부에 사아질이 노출된 치아가 적어도 좌우로 2개 이상의 짝이 되는 치아를 소유하였다. 본 연구에 사용된 치아는 모두 50 개로써 실험군 25개, 대조군 25 이었다. Tactile test, cold(ice stick) test, electrical pulp test 를 실험전, 실험 1주후, 2주후, 3주후, 4주후 모두 5회 시행하였다. 레이저조사는 첫방문시, 1주후, 2주후, 3주후 등 4회하되 모두 세가지 검사를 마친 후 시행하였다. 전기치수 검사 외 Tactile test와 cold test는 주관적 평가인 visual analogue scale을 사용하였다. 실험 결과, Tactile test에서 VAS 수치는 시간 경과에 따라 유의하게 감소하였으나 실험군과 대조군간에는 유의한 차이가 없었다. 전기치수 검사에서는 실험군의 과민도가 대조군에 비해 유의하게 높았으나 (높은 역치를 의미) 시간 경과시 유의한 변화는 볼 수 없었다. 온도 (cold) 검사에서는 레이저 조사후 실험군과 대조군 간의 차이뿐 만 아니라 시간 경과 시에도 유의하게 감소하였다. 이러한 결과를 보아 904 nm GaAs 레이저는 과민치아의 치료에 비가역적인 방법으로서 효과적으로 사용할 수 있으리라 사료된다.

고분자 기반 코팅형 상아질 지각 과민 처치제의 효과에 대한 비교 연구 (Comparison of high molecular coating type dentine hypersensitivity desensitizers)

  • 노영훈;이주연;박현정;최차남;박윤정;구기태;김태일;설양조;이용무;구영;류인철;정종평
    • 대한치과의사협회지
    • /
    • 제46권11호
    • /
    • pp.683-688
    • /
    • 2008
  • Purpose : The aim of this study was to evaluate the clinical efficacy of two commercially available desensitizing agents over 3 weeks on patients with dentin hypersensitivity. Materials and Methods : An oxalate-based solution, Sensblok (NIBEC Inc. Seoul, Korea) & Superseal (Pheonix Inc. Michigan, USA), and a distilled water placebo were compared in a clinical setting. Seven volunteers exhibiting three or more teeth that were sensitive to tactile & air were enrolled in the study (35 teeth total). A visual analog scale (VAS) was used for recording each patient s level of sensitivity to tactile & air stimuli. A Florida probe was rubbed across the exposed dentin three times with a constant pressure 20 grams to measure the tactile stimulus. The air stimulus was generated by dental unit air syringe for 1-second blast from 1/2 inch distance. The desensitizing agents were applied according manufacture s guideline. VAS scores were recorded at baseline, 1 minute after treatment, at 1 week, 2weeks, 3weeks. VAS score were analyzed using a repeated measures ANOVA ( =0.05). Results : The Sensblok, Superseal, and distilled water placebo all decreased dentin sensitivity. A statistically significant difference existed between Sensblok and placebo when tactile stimulus was applied (P<0.05), but no significant difference was found among other desensitizing agents and tactile and air stimuli.

  • PDF