• Restorative Dentistry and Endodontics
• /
• 제28권3호
• /
• pp.209-221
• /
• 2003

The objectiveness of this study was to evaluate whether low-viscosity composite can bond effectively to dentin surface without bonding resin. The low-viscosity composites being 50wt% filler content were made by the inclusion of bonding resin of two self-etching systems(Cleafil SE Bond, Unifil Bond) varied with contents as 0, 10, 20, 30, 40, 50wt%. Exposed dentin surfaces of extracted 3rd molars are used. Dentin bond strengths were measured. The tests were carried out with a micro-shear device placed testing machine at a CHS of 1mm/min after a low-viscosity composite was filled into an iris cut from micro tygon tubing with internal diameter approximately 0.8mm and height of 1.0mm. 1 Flexural strength and modulus was increased with the addition of bonding resin. 2. Micro-shear bond strength to dentin was improved according to content of bonding resin irrespective of applying or not bonding resin in bonding procedure, and that of Clearfil SE Bond groups was higher than Unifil Bond. 3. There were no significant difference whether use of each bonding resin in bonding procedure for S-40, S-50, U-50(p＞0.05). 4. In SEM examination, resin was well infiltrated into dentin after primed with self-etching primer only for S-50 and U-50 in spite of the formation of thinner hybrid layer. Low viscosity composite including some functional monomer may be used as dentin bonding resin without an intermediary bonding agent. It makes a simplified bonding procedure and foresees the possibility of self-adhesive restorative material.

• 대한치과보존학회:학술대회논문집
• /
• 대한치과보존학회 2002년도 추계학술대회
• /
• pp.678-678
• /
• 2002

No Abstract, See Full Text

• 대한치과보존학회:학술대회논문집
• /
• 대한치과보존학회 2001년도 추계학술대회(제116회) 및 13회 Workshop 제3회 한ㆍ일 치과보존학회 공동학술대회 초록집
• /
• pp.577-577
• /
• 2001

The lastest concepts in bonding are "total etch", in which both enamel and dentin are etched with an acid to remove the smear layers, and "wet dentin" in which the dentin is not blown dry but left moist before application of the bonding primer. Ideally, the application of a bonding agent to tooth structure should be insensitive to minor contamination from oral fluids. Clinically contaminations such as saliva, gingival fluid, blood and handpiece lubricant are often encountered by dentists during preparation of a restoration. The aim of this study was to evaluate the effect of contamination by hem-ostatic agents on shear bond strength of compomer restorations. One hundred and ten extracted human maxillary and mandibular molar teeth were collected. The teeth were cleaned from soft tissue remnant and debris and stored in physiologic solution until they were used. Small flat area on dentin of the buccal surface were wet ground serially with 400, 800 and 1200 abrasive paper on automatic polishing machine. The teeth were randomly divided into 11 groups. Each group was conditioned as follows: Group 1 : Dentin surface was not etched and not contaminated by hemostatic agents. Group2 : Dentin surface was not etched but was contaminated by Astringedent (Ultradent product Inc., Utah, U.S.A.). Group3 : Dentin surface was not etched but was contaminated by Bosmin (Jeil Phann, Korea.). Group4 : Dentin surface was not etched but was contaminated by Epri-dent (Epr Industries, NJ, U.S.A.). Group5: Dentin surface was etched and not contaminated by hemostatic agents. Group 6 : Dentin surface was etched and contaminated by Astringedent. Group7 : Dentin surface was etched and contaminated by Bosmin. Group8 : Dentin surface was etched and contaminated by Epri-dent. Group9 : Dentin surface was contaminated by Astringedent. The contaminated surface was rinsed by water and dried by compressed air. Group10 : Dentin surface was contaminated by Bosmin. The contaminated surface was rinsed by water aud dried by compresfed air. Group 11 : Dentin surface was contaminated by Epri-dent. The contaminated surface was rinsed by water and dried by compresfed air. After surface conditioning, F2000 was applicated on the conditoned dentin surface. The teeth were thermocycled in distilled water at $5^{\circ}C\;and\;55^{\circ}C$ for 1000 cycles. The samples were placed on the binder with the bonded compomer-dentin interface parallel to the lmife-edge shearing rod of the Universal testing machine(Zwick 020, Germany) running at a cross head speed of 1.0mmimin. There were no significant differences in shear bond strength between groups 1 and group 3 and 4, but group 2 showed significant decrease in shear bond strength compared with group 1. There were no significant differences in shear bond strength between group 5 and group 7 and 8, but group 6 showed significant decrease in shear bond strength compared with group 5. There were no significant differences in shear bond strength between group 5 and group 9, 10 and 11.

• 대한소아치과학회지
• /
• 제37권4호
• /
• pp.422-428
• /
• 2010

Giomer는 글라스 아이오노머 시멘트의 불소 방출 능력과 복합레진의 물성을 동시에 가지고 있는 새로운 형태의 재료로서 소개되었다. 이에 본 연구에서는 giomer의 전단 결합강도를 기존의 심미 수복재료인 복합 레진과 컴포머와 비교하여 심미 수복재료로서의 임상적 효용성을 평가하고자 한다. 소의 전치를 자가중합 교정용 레진을 이용하여 아크릴 튜브에 매몰시킨 후, 상아질을 노출시키기 위해 실리콘 페이퍼를 이용하여 표면을 연마하였다. 샘플을 무작위로 I군(Giomer), II군(복합 레진), III군(컴포머), IV군(Giomer와 5세대 단일병 접착제)으로 분류하였다. 만능 시험기를 이용하여 각 샘플의 전단 결합강도를 측정하였다. One-way ANOVA와 Scheffe test를 이용하여 통계분석을 시행하였다. I군은 III군에 비해 통계학적으로 유의하게 높은 전단 결합강도를 나타냈다(p<0.05). I군과 II군의 전단 결합강도는 통계학적으로 유의한 차이가 없었다(p>0.05). IV군는 I군에 비해 낮은 결합강도를 보였지만, 통계학적으로 유의한 차이는 없었다(p>0.05). 실험의 결과로 보아 불소 방출의 특성을 지닌 giomer의 결합강도가 컴포머에 비해 우수하고, 복합 레진과 유사한 것으로 나타남으로써 소아 환자의 심미수복재료로서의 임상적 효용성이 있다고 사료된다.

• 대한치과보철학회지
• /
• 제44권4호
• /
• pp.383-393
• /
• 2006

Statement of problem : Limited research on flowable resin has been undertaken on its application directly on dentin associated with the adhesive systems. Purpose : This study was to evaluate the shear bond strengh and fracture aspect of flowable resin on human dentin with various types of dentin bonding adhesives with thermo cycling effect. Materials and methods: Filtek-Flow(3M ESPE, USA) was used as flowable resin and Eighty human molars were randomly divided into 4 groups : three dentin bonding adhesives (Scotchbond-Multipurpose : 3-step contentional system, One-Step : One-bottle system. Prompt L-Pop : All-in-one, self-etching primer) and 32% etching treatment without bonding adhesive as a control group. For evaluating their durability of bonding, each group was subdivided : storaging in the water at 37$^{\circ}C$(24 hours) and thermocycling (0$^{\circ}C$-55$^{\circ}C$, 30 seconds intervals, 1000 cycle). Shear bond strength tests were performed and resin-dentin interface and fracture mode were observed. Results were analysed by one-way ANOVA and Scheffe's multiple range test. Results and Conclusion : 1. At 0 cycle, the mean shear bond strength of One-Step exhibited the highest value of all groups(p<0.05), and there were no significant differences between Prompt L-Pop and Scotchbond-Multipurpose, Scotchbond-Multipurpose and control(p>0.05). After 1000 thermocycling, One-Step exhibited higher value than other groups(p<0.05), and there were no significant differences among other groups (p>0.05). 2. The shear bond strength of each group was significantly decreased after thermocycling except Scotchbond-Multipurpose (p>0.05). 3. The most common failure mode was adhesive type and mixed type, next in order.

• Restorative Dentistry and Endodontics
• /
• 제22권1호
• /
• pp.209-219
• /
• 1997

The research of the dentin bonding system was mainly on the chemistry and bonding strength. And in vitro assessement of biocompatibility of dentin bonding system was not completely developed. The purpose of this study was to evaluate the cytotoxic effect of several dentin primers. Scotchbond Multi-Purpose (3M Dental Products. USA). Gluma (BayerDental. Germany). All-Bond (Bisco. USA). ProBond (CaulkDensply, USA) and VeridonFil (Dongyang Nylon. Korea) were included. Cytotoxicity was tested using MTT cell viability test. 0.5 ul. 1 ul. 2 ul and 10 ul of each primer were added to the 96 well plate of incubated L929 cell lines. After 30-minute. 1. 4. 24 and 72-hour exposures. absorbance of L929 cells was observed with ELISA reader. All data were analyzed using t-test. All primers showed cytotoxicity on L929 cells under every conditions used in this study. Absorbance of L929 cells was decreased by time. Scotch bond group exhibited the lowest absorbance value in all exposure time and value.

• Restorative Dentistry and Endodontics
• /
• 제32권3호
• /
• pp.236-247
• /
• 2007

접착제의 술식을 간편하게 하고 효과적이며 안정적인 접착강도를 지닌 상아질 접착제를 개발하고자 isocyanate methacrylate의 농도를 달리해 상아질에 적용하여 전단결합강도를 측정하고 응집파괴양상을 분석, 평가하였다. Isocyanate methacrylate의 농도에 따라 0% (대조군), 2%, 4%, 6%, 8%, 10%, 및 12%의 7개 실험군으로 분류하였으며 , Instron (No.4466.USA)를 이용하여 복합레진의 전단 결합강도를 측정하고 Resin tag 및 응집파괴를 주사전자현미경으로 관찰해 다음 결론을 얻었다. 1. Cyanate methacrylate 8%군이 가장 높은 전단 결합강도는 나타내었으나 (33.62 KPa), 통계학적 유의성이 없었다 (P > 0.05). 2. Cyanate methacrylate 2% ,4% 및 6%군은 응집성파괴빈도가 대조군 (0%군)과 비교하여 높게 나타났다. 3. Cyanate menthacrylate군에서 레진tag의 길이는 짧게 나타났다. 이상의 연구의 결과로 cyanate methacrylate가 collagen과 반응하여 상아질 내로 침투를 방해하며 레진 tag의 길이를 짧게 하며 상아질의 유기성분과의 반응에 의하여 결합강도는 높아질 수 있으나, 상아질 자체의 강도가 낮아질 수 있어 상아질에 대한 결합강도의 실질적인 증가는 확인할 수 없었다.

• Restorative Dentistry and Endodontics
• /
• 제16권2호
• /
• pp.99-117
• /
• 1991

The purpose of this study is to evaluate the effects of dentin bonding agents on the fibroblasts cultivated from human pulp tissue. The fibroblasts were cultured in DMEM/10%FBS medium. Whatman filter paper discs (6mm diameter) soaked with $2{\mu}l$ of dentin bonding agents were placed on a millipore filter (pore size $0.22{\mu}m$) contained in a 50mm Petri dish, and then, exposed for 10 minutes, 30 minutes, 1 hour, 6 hours, 12 hours, 24 hours, 4 days and 7 days in $37.^{\circ}C$, 5% $CO_2$ incubator. The results of the experiments were analyzed by counting the cells and measuring the protein contents at 1 day, 4 days and 7 days. The results of this study were as follows: l. CLEARFIL NEW BOND, LITE-FIL BOND, GLUMA 3 Primer and GLUMA 4 Sealer showed cytotoxicity compared to the control group in the cell counts and the protein contents. 2. GLUMA 4 Sealer showed the least cytotoxicity among the three dentin bonding agents. 3. The results of the cell count were simialr to the results of protein content measurement. 4. LITE-FIL BOND exhibited marked cytotoxicity during 1 day, but, the cytotoxicity was slightly reduced after 4 and 7 days. 5. In GLUMA 3 Primer group, it was not possible to count the cell numbers and measure the protein contents, but the degeneration of cells was observed under the inverted phase-contrast microscope.

• 대한소아치과학회지
• /
• 제32권2호
• /
• pp.293-299
• /
• 2005

소아환자의 수복치료에서 시술시간과 시술과정을 줄이는 것은 중요한 점이다. 복합레진은 물성의 증가로 영구치, 유치 전치부 심미수복재로써 뿐만 아니라 구치부 수복에도 많이 쓰이고 있다. 최근에 개발된 7세대 상아질 결합제는 기존의 복합레진을 치면에 부착하기 위해 필요했던 산부식, 프라이밍, 접착제 도포의 복잡한 과정을 한번의 처리로 단순화하였다. 본 연구에서는 유치 상아질에서 7세대 상아질 결합제의 결합력을 기존에 사용되고 있는 여러 결합제의 결합력과 비교하였다. 1, 2, 3, 4군은 각각 4, 5, 6, 7세대 상아질 결합제를 사용하였다. 유치 상아질을 노출시키고 군에 따라 상아질 면을 처리한 후에 직경 2.5mm, 높이 2.0mm의 주형을 이용하여 복합레진을 접착시키고 열순환을 시행한 다음 전단결합강도를 측정하여 다음과 같은 결론을 얻었다. 1. 5세대 상아질 결합제인 Clearfil SE Bond가 가장 높은 전단결합강도인 $27.87{\pm}5.33\;MPa$를 보였다. 이것은 4, 6, 7세대와 비교했을 때 통계학적으로 유의하였다. 2. 4세대 상아질 결합제의 전단결합강토는 $20.11{\pm}5.73\;MPa$로 6, 7세대보다는 약간 높게 나타났지만 통계적으로 유의한 차이는 보이지 않았다. 3. 6, 7세대 상아질 결합제의 전단결합강도는 유사하게 나타났다.

• Restorative Dentistry and Endodontics
• /
• 제25권4호
• /
• pp.575-586
• /
• 2000

In this study, adaptation of compomer to saliva contaminated dentin was evaluated with scanning electron microscope(SEM) and confocal laser scanning microscope(CLSM). For the SEM study, the occulusal surfaces of thirty two molar teeth were grounded to exposure dentin surfaces. The specimen were randomly assigned to control and three experimental groups with four samples in each group. In control group, Dyract and F-2000 compomer were bonded on the specimens according to the manufactures direction. Experimental groups were subdivided into three groups. They were contaminated with saliva on dentin surfaces ; Experimental group 1 : Saliva was dried with compressed air. Experimental group 2 : Saliva was rinsed with air-water spray and dried. Experimental group 3 : After polymerization of an adhesive, they were contaminated with saliva, and then saliva was rinsed with air-water spray and dried. Dyract and F-2000 compomer were bonded on saliva-treated dentin surfaces. The interfaces between dentin and compomer were observed with SEM. For the CLSM study, Class V cavities were prepared in buccal and ligual surfacess of thirty two molars. The specimens were divided into control and experimental groups. Class V cavities in experimental group were contaminated with saliva and those surfaces in each experimental groups received the same treatments as for the SEM study. Cavities were applied Prime & Bond 2.1 and F-2000 compomer primer/adhesive that were mixed with fluorescein, and then were filled with Dyract and F-2000 compomer. Specimens were embedded in transparent acrylic resin and sectioned buccolingual1y with diamond wheel saw, and then mounted on cover slide for CLSM study. The interface between cavity and compomer was observed by fluoresence imaging with a CLSM. The results were as follows : 1. In SEM exammination of Dyract group, control group, experimental group 2, 3 showed close adaptation to dentin and hybrid layer of $3{\sim}4{\mu}m$ diameter. Interfacial gap between compomer and dentin in experimental group 1 was wider than in control group. 2. In SEM examination of F-2000 group, adaptation to dentin of control group was closer than Dytact control group, but hybrid-like layer was not observed. Interfacial gap between compomer and dentin in experimental group 1 was wider than in Dyract experimental group 1. 3. In dissolution specimens of Dyract and F-2000 group, resin tags penetrated through dentinal tubules in control group and experimental group 1 and 3, but the penetration of resin tag was irregular and partial in experimental group 1. 4. In CLSM exammination of Dyract and F-2000 group, adhesive patterns of control and experimental groups showed same as in SEM. This result suggests the treatment methods, rinsing & drying, repeating all adhesive procedures, will produce good effect on adaptation of compomer to dentin if the dentin surface or polymerized adhesive is contaminated by saliva.