• Journal of the Korean Ceramic Society
• /
• v.40 no.6
• /
• pp.525-529
• /
• 2003

Biotribological properties, such as wear rate and friction coefficient, of 3Y-TZP and Low Temperature Degradation (LTD) free materials were investigated via a ball(SiC)-on-plate sliding wear test to evaluate the relationship between wear mechanism and phase transformation. Wear test was conducted with a sliding speed of 0.035 m/s at room temperature and at 25$0^{\circ}C$ in air under a normal load of 49 N, respectively. Although friction coefficient of 3Y-TZP was the lowest due to the fine grain size, the highest wear loss and rate were observed due to the debris of monoclinic grains introduced during sliding and their values increased drastically with raising temperature. However, the biotribological properties of LTD-free materials were insensitive to temperature due to the inertness of the phase transformation, suggesting that they may be applicable to the biomechanical parts.

• The Journal of the Korean dental association
• /
• v.50 no.1
• /
• pp.6-12
• /
• 2012

As in all other parts in the body, oral tissue also undergoes dramatic changes with increasing age. Since these changes occasionally go beyond physiological scope, which may result in pathological changes, it is essential for dentist to understand changes caused by normal aging process. With increasing age, tooth morphology and occlusion also varies, especially loss of hard tissue, which is taking place in lifelong time, occurs as a result of tooth wear. When this loss of hard tissue is presented rapidly or excessively, functional and esthetical problems are raised, resulting in lowering quality of life of patient as well as making dental treatment for oral rehabilitation even more complex. Therefore, based on understanding of change in occlusion with increasing age, strategic approaches for maintenance of oral health in both functional and esthetic aspect are required as appropriate restoration and maintenance for progressive tooth wear enables desirable occlusal relationship. Carefully planned-restorative treatment in accordance with changed occlusal relationship is also required in the same context. Instead of taking changes in oral tissue as only a consequence of ageing, it is vital to educate patient and his or her guardian, assuring maintenance of oral hygiene and regular dental check-up are of utmost importance for improved oral health.

• Tribology and Lubricants
• /
• v.29 no.4
• /
• pp.235-241
• /
• 2013

The tribological characteristics of dental metal alloys and zirconia were studied by carrying out a friction and wear performance test. In this study, a pin-on-disk-type tester was used and dead weight was employed as the normal load applied to the test specimen. The friction coefficient of dental metal alloys was investigated in terms of their weight and sliding velocity. Microscopic observations were carried out on worn surfaces of specimens. The results indicated that among all metal alloys, Super-A had the highest friction coefficient. Super-A had the lowest amount of wear among all metal alloys, and the amount of wear increased in the following order: Crown & Bridge, Porcelain, and Partial. Crown & Bridge had the best friction coefficient, but the hardness of Crown & Bridge was lower than that of Porcelain and Partial. Experimental measurement results indicated that the disk weight before and after the experiment was the same.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.35 no.3
• /
• pp.113-122
• /
• 2019

Tooth wear is gradually increasing with increasing life expectancy. In particular, it is important to establish a treatment plan in the early stages so that it does not proceed to moderate or severe wear stages. It is essential to diagnose tooth wear accurately in order to plan a treatment for it. There are many risk factors including age, diet, and drugs which affects tooth wear. For the diagnosis of a tooth wear, appropriate index and evaluation method should be used. There were various tooth wear indices such as TWI, Lussi index, BEWE, and TWES. The evaluation method includes clinical examination, dental cast examination and clinical photographs. Recently, a 3D scanner is being used to assess tooth wear. The risk factors, tooth wear evaluation system, the methods of measuring tooth wear, and related literature were reviewed. The strengths and weaknesses of each index and evaluation methods were compared to derive a proper way to diagnose tooth wear.

• Journal of Technologic Dentistry
• /
• v.42 no.1
• /
• pp.55-64
• /
• 2020

Purpose: The purpose of this study was to investigate the relationship between systemic diseases and denture wear status in elderly. The subjects of this study were 4,340 seniors aged 65 or older who conducted screenings and health surveys using the National Health and Nutrition Survey data during the sixth period (2013, 2014 and 2015). Methods: For the general characteristics and denture wear status according to general systemic diseases, complex sample frequency analysis and cross-analysis were performed. After controlling the general characteristics, complex sample logistic regression analysis was performed to determine the relationship between systemic diseases and denture wear status. Statistical software was used for SPSS (SPSS 23.0 for Windows, SPSS Inc, USA). Significance level was considered as 0.05. Results: A multisample logistic regression analysis was performed to determine the relationship between systemic diseases and denture wear status. The results showed that the dentured state had a significant effect on dyslipidemia and diabetes. Conclusion: Dyslipidemia and diabetes, which are related to denture wearing condition, need to be prevented and treated with regular checkups. In addition, based on the results of the study, it is thought that the elderly need denture prosthetic treatment after tooth extraction. In addition, it can be used as basic data for oral health business plan that can maintain and manage oral health.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.29 no.2
• /
• pp.217-225
• /
• 2002

When we use the flowable resin on the primary molars for quick handling, one of the most important property is the wear resistance. This study was performed to compare the wear resistance characteristics of four flowable composite resins [Arabesk flow (group 1), Tetric flow (group 2), Aeliteflow (group 3), Filtek flow (group 4)] to that of one control composite resin [Z100 (group 5)]. Specimen discs(n=10), 10mm wide and 2mm thick, were stored in distilled water at $37^{\circ}C$ for 7 days prior to testing. The specimens were subjected to 50,000 strokes at 2 Hz on the MTS system. During the test, the following parameters were maintained: the lateral excursion at 0.4mm, occlusal force at 2-100N with a force profile in the form of a half sine wave. The measurements of volume loss, depth of wear, and Vicker's hardness number of composite resins, and SEM observations of the polished and abraded surfaces were established. One-way ANOVA and Scheffe's multiple comparison test were employed to detect statistically significant differences among the flowable composite resin groups and the control composite group at P<.05. The following results were obtained: 1. Group 3 showed the least volume loss, while group 4 showed the greatest. The mean volume loss increased in the following order: group 3

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2007.06a
• /
• pp.7-8
• /
• 2007

• Journal of dental hygiene science
• /
• v.13 no.2
• /
• pp.151-157
• /
• 2013

The purpose of this study was to examine the toothbrush bristles' wear index and wear rate used by preschool children to provide information on the establishment of criteria for toothbrush replacement cycle for preschool children. One thousand twenty-two toothbrushes were collected from September 20 to November 16, 2012 was analyzed. The findings of the study were as follows: 1. As a result of analyzing the toothbrush wear index, 48.5% of the collected toothbrushes was above 0.400, and the average wear index was $0.421{\pm}0.239$. 2. As a result of analyzing the wear rate of the toothbrushes, score 2 and 3 accounted for 70.4%, and the average wear rate stood at $1.936{\pm}0.848$. 3. As a result of analyzing the state of toothbrush management, the most common average toothbrush replacement cycle was one or two months (63.9%). Concerning the method of toothbrush replacement, the largest group (52.7%) replied they changed toothbrushes based on the abrasivity of toothbrush bristles, and 16.7 percent did that at the request of parents. Given the above-mentioned findings of the study, preschool teachers and parents should be educated to ensure the successful management of preschool children toothbrushes. In addition, it's required to set evident criteria for the right toothbrush replacement cycle for preschool children, and how to provide oral health education in an efficient way should be considered as well.

• Journal of Technologic Dentistry
• /
• v.38 no.3
• /
• pp.157-163
• /
• 2016

Purpose: It is to compare and evaluate the change of the wear rate and phase variation of the Zirconia before and after the sintering after the grinding by a high speed equipment manufactured for the Zirconia. Methods: The specimen of the sintered Zirconia was manufactured as size of $15mm{\times}15mm{\times}2mm$. The grinding has been applied to each of all pieces of each test groups for a minute fit for each condition at same speed of 50,000 rpm by a diamond bur at high speed handpiece with injection of the air and water. For the observation of the surface before and after the sintering of the each test piece, the cross section of it was observed as 100 magnification by a scanning electron microscope after it was coated by PT, and the diffraction analysis was performed by XDR to compare the crystal phase of the Zirconia. The average surface roughness value of all specimens were evaluated. The wear test was performed at room temperature by applying a load of 1kg for 120,000 cycles for the chewing period 6 months. Wear was analyzed for the enamel cusps by measurement of the vertical substance loss with a laser scanner. Conclusion: The phase variation from the tetragonal phase to the monoclinic phase was confirmed in the test group of the pre-sintered Zirconia after the grinding, and the value of the surface roughness and the wear rate was increased in experimental group.

• The Journal of Advanced Prosthodontics
• /
• v.15 no.1
• /
• pp.33-43
• /
• 2023

PURPOSE. This study investigated the physical and mechanical changes in the titanium base of three different hybrid abutment materials after cyclic loading by estimating the post-load reverse torque value (RTV), compressive side fulcrum wear pattern of titanium base, and surface roughness. MATERIALS AND METHODS. A total of 24 dental implants were divided into three groups (n = 8 each): Group Z, LD, and P used zirconia, lithium disilicate, and polyetheretherketone, respectively, for hybrid abutment fabrication. RTV was evaluated after cyclic loading with 50 N for 1.2 × 10⁶ chewing cycles. The compressive sides of the titanium bases were analyzed using a scanning electron microscope, and the roughness of the affected areas was measured using an optical profilometer after loading. Datasets were analyzed using Kruskal-Wallis test followed by Mann-Whitney tests with the Bonferroni correction (α = .05). RESULTS. Twenty-three samples passed the test; one LD sample fractured after 770,474 cycles. Post-load RTV varied significantly depending on the hybridabutment material (P = .020). Group P had a significantly higher median of post-load RTVs than group Z (16.5 and 14.3 Ncm, respectively). Groups LD and P showed minor signs of wear, and group Z showed a more pronounced wear pattern. While evaluating compressive side affected area roughness of titanium bases, lower medians were shown in group LD (Ra 0.16 and Rq 0.22 ㎛) and group P (Ra 0.16 and Rq 0.23 ㎛) than in group Z (Ra 0.26 and Rq 0.34 ㎛); significant differences were found only among the unaffected surface and group Z. CONCLUSION. The hybrid abutment material influences the post-load RTV. Group Z had a more pronounced wear pattern on the compressive side of titanium base; however, the surface roughness was not statistically different among the hybridabutment groups.