• The Journal of the Korean dental association
• /
• v.51 no.1
• /
• pp.6-11
• /
• 2013

Dental ceramics is well known to have excellent esthetics, biocompatibility as well as high compressive strength. However, the fragility of ceramics against tensile and shear loads leading to the delayed fracture of micro crack on ceramic surface and the backwardness of ceramic fabrication technique limit the usage of ceramic materials in dentistry. Among all ceramic materials, zirconia has been introduced to overcome the drawback of conventional dental ceramics in the field of dentistry due to the nature of zirconia featuring proper opalescence and high fracture toughness. Also, novel manufacturing techniques enable ceramic materials to prepare high esthetic anterior and posterior all ceramic system. In this paper, it is introduced and discussed that novel techniques characterizing the bond strength between zirconia core and veneering ceramics and analyzing the fluorescence of dental ceramics in order to overcome the gap between the results of basic research and the feasibility of the results in the field of dental clinics.

• Journal of Dental Anesthesia and Pain Medicine
• /
• v.16 no.2
• /
• pp.111-116
• /
• 2016

Background: Inferior alveolar nerve block (IANB) of the mandible is commonly used in the oral cavity as an anesthetic technique for dental procedures. This study evaluated the success rate of the first IANB administered by dental practitioners. Methods: Volunteer dental practitioners at Mahidol University who had never performed an INAB carried out 106 INAB procedures. The practitioners were divided into 12 groups with their advisors by randomized control trials. We recorded the success rate via pain visual analog scale (VAS) scores. Results: A large percentage of the dental practitioners (85.26%) used the standard method to locate the anatomical landmarks, injecting the local anesthetic at the correct position, with the barrel of the syringe parallel to the occlusal plane of the mandibular teeth. Further, 68.42% of the dental practitioners injected the local anesthetic on the right side by using the left index finger for retraction. The onset time was approximately 0-5 mins for nearly half of the dental practitioners (47.37% for subjective onset and 43.16% for objective onset), while the duration of the IANB was approximately 240-300 minutes (36.84%) after the initiation of numbness. Moreover, the VAS pain scores were $2.5{\pm}1.85$ and $2.1{\pm}1.8$ while injecting and delivering local anesthesia, respectively. Conclusions: The only recorded factor that affected the success of the local anesthetic was the administering practitioner. This reinforces the notion that local anesthesia administration is a technique-sensitive procedure.

• Journal of Dental Anesthesia and Pain Medicine
• /
• v.24 no.3
• /
• pp.173-185
• /
• 2024

Background: Excessive fear of dental procedures leads to disruptive behavior during dental examinations and treatments. Dental examinations and treatments of these patients usually require additional techniques, such as sedation. The most commonly used techniques are inhalation of nitrous oxide, infusion of propofol with fentanyl, and premedication and infusion of midazolam. Methods: A prospective observational epidemiological study was conducted on patients who required sedoanalgesia techniques for dental exploration and procedures. The reasons for the inability of patients to cooperate (excessive fear or intellectual disability), age, sex, weight, systemic pathology, oral pathology, treatment performed, time of intervention, anesthetic technique performed, and occurrence of complications were recorded. Results: In total, 218 patients were studied. Sixty-five patients came for fear of dental treatment and 153 for presenting with a diagnosis of intellectual disability and not collaborating in the treatment with local anesthesia. The average age of all patients was 30.54±17.30 years. The most frequent oral pathologies found in patients with excessive fear were tartar (6.8%) and wisdom teeth (6.4%), followed by missing teeth (5%). In patients with disabilities, a combination of tartar and cavities appeared most frequently (41.3%), followed by cavities (15.6%). The most frequently used sedoanalgesia technique was the infusion of propofol with fentanyl in both groups of patients, followed by nitrous oxide. Conclusion: The combination of propofol and fentanyl was the most frequently used alternative in patients who were unable to collaborate because of intellectual disability or carry out longer or more complex treatments. Inhaled nitrous oxide and midazolam were the sedative techniques of choice for simpler oral treatments, such as tartrectomies, shallow obturations, and shorter interventions, or in younger patients.

• The Journal of the Korean dental association
• /
• v.23 no.12 s.199
• /
• pp.1031-1037
• /
• 1985

The purpose of this study was to evaluate the marginal sealing ability of 'vivadent.' Using freshly extracted human teeth and 2% aqueous methylene blue, the marginal leakage of dye in restorative materials such as vivadent with acid etching technique, Durafill with acid etching technique, silar with acid etching technique, Adaptic, and Amalgam were investigated at 37℃ and under temperature cycling in range of 4℃-60℃. The results were as follows; 1. All filling materials showed some degree of marginal penetration by 2% methylene blue dye. 2. Vivadent with acid etching technique revealed effective marginal sealing ability, but under temperature cycling it showed increased marginal leakage. 3. All resins showed greater marginal leakage than amalgam restoration. 4. Vivadent had the most effective marginal sealing ability in experimented resins.

• Journal of Korean society of Dental Hygiene
• /
• v.7 no.3
• /
• pp.285-299
• /
• 2007

The purpose of this study was to provide basic data of education program and consult for dental implant patient. The 210 of dental patients were selected at five dental clinic located in Jin-ju city. Data were collected by self-administrated questionnaire. A SPSS 10.10 for Windows was used for statistical analysis. The results of the study are summarized as follows: 1. The female responser was 56.2%, the rate of age was thirty years old 26.7%, education level was more than university and college 45.7%, job is company unit 15.2%, income was 100~200man won of 48.6%. 2. Recognition of dental implant was that incase of 'yes' is more than sixty years old 77.3%. 3. The information of implant was from neighborhood 29.0%, and when dental consult 24.3%. 4. The responsor who is everyone can take the dental implant operation is 39.5%, can not take is 32.9%. 5. The responsor who is everyone wants implant operation was 45.2%, 'do not' is 17.1%. 6. Using period of implant tooth is 'forever' 40.0%. In limited of twenty years' is 23.8%. 7. When everyone select to dental clinic was because of dentist medical technique is 64.3%, dental treatment cost is 15.9%. In conclusion, it is necessary for the dental implant patient to make dental consult and education program. So, try to study for make basic data with analysis recognition of dental implant patients.

• Journal of Technologic Dentistry
• /
• v.30 no.1
• /
• pp.131-139
• /
• 2008

It's very important to find the most appropriate adhesion technique available, taking into consideration factors such as biocompatibility, non-corrosiveness, mechanical stability, etc. Laser welding is the best choice you can make because from a mechanical viewpoint, a laser welded surface has better particle structure than does a casted particle structure. Furthermore, it requires no additional material and the same metal alloy which is used when casting can be used. Therefore, the resulting mixture will consist of a single alloy, instead of utilizing different alloy combinations. Another benefit is the low economic cost. The most beneficial aspects of laser welding is that it is biologicallly friendlly, doesn't require soldering, can fuse different metal alloys together, and can weld on heat-sensitive spots(E.g. around resin or ceramic). A consistent strong pulse is possible. This technique is capable of welding on master models and creates accurate welds. It is capable of due to its stronger, non-corrosive microscope, which allows 25times magnification during the soldering process. This is possible because of its high stability from the tiny particle structure.

• The Journal of the Korean dental association
• /
• v.11 no.4
• /
• pp.287-291
• /
• 1973

A case report of replantation of extracted teeth. A 11-year-old female child patient whose right and left 1st premolars were dislocated by accident, which was treated by means of tooth replantation and obtained the following results. 1) In childhood whose development and growth were prominent prognosis were excellent. 2) The better results were drew by tooth fixation with acrylic resin after ligature the teeth with wire. 3) To treat the tooth replantation combination with canal treatment brings on the good results. 4) We can maintain the natural teeth, which could get the same function as before. According to previous results, the technique can be usd clinically.

• Journal of Technologic Dentistry
• /
• v.27 no.1
• /
• pp.155-171
• /
• 2005

The market of dental materials industry in Korea will over 10 bilians $. If think concern of world market, we can know the possibility of market growth. In Korea, the technique of dental materials industry is low status. Then, special items income advanced countries. But advanced countries had been developed dental materials industry into high beneficial. Otherwise, Daegu Kyungbuk have several good points in dental materials industry. 1st, national dentisty university and three dental lab. college supplies abilitable human resources. 2nd, the possibility of support on basic industrial technology. Finally, the possibility of selection & attraction from many dental company. Then if Daegu Kyungbuk would be select & supported of dental materials Industrial special region, it can be think that will empower local economy, further national constitutional power. So we propose following three points, 1st. the deeper study on righteous of Daegu Kyungbuk dental materials industrial specialization. 2nd. investment on R & D of the region dental materials industrial. final, the support of venture circle.

• Journal of Technologic Dentistry
• /
• v.36 no.3
• /
• pp.159-164
• /
• 2014

Purpose: The purpose of this study was analysis of quality of fixed prostheses fabricated by dental CAD/CAM system. Methods: The ten same cases of stone models were manufactured by dental scannable model, and stone models were scanned using the dental scanner for changing digital model. Ten digital models were completed. The design of zirconia core for zirconia based all-ceramic crown was conducted by the dental CAD program. The samples were fabricated using the pre-sintered zirconia block by dental milling machine. Marginal gaps were analyzed using by silicone replica technique at the eight parts for quality analysis of samples. One-way ANOVA was used for statistical analysis(${\alpha}=0.05$). Results: The mean for marginal gaps were $93.2{\sim}99.1{\mu}m$ at the eight parts. One-was ANOVA didn't show significant differences(p=0.089). Conclusion: The fixed dental prostheses fabricated by dental CAD/CAM were within clinically acceptable range.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.17 no.1
• /
• pp.271-278
• /
• 1987

The purpose of the present study was to investigate associations between periapical and bitewing techniques by assessing the crestal alveolar bone. This article also reports the ability of these two techniques to correctly detect evidence of interproximal dental caries, and comparison between the interproximal overlapping of teeth. Bitewing and periapical radiographs were used from posterior quardants of 243 dental students in Seoul National University. The distance from cemento-enamel junction to the alveolar crest (CEJ-AC) was measured for each proximal surface from the distal of cuspid to the distal of second molar. Data were arranged according to the proximal surface examined, and bitewing and periapical measurements were compared using paired tests. The obtained results were as follows: 1. In maxilla, a significant t ratio with a P value of 0.05 or less reached for 100% and in mandible, reached for 94%. 2. The anatomic limitations imposed on periapical radiographic technique, most often result in somewhat foreshortened radiographic images. This situation would tend to be accentuated by the anatomical restrictions of the hard palate. 3. Consequently, since the significant differences frequently exist between measurements obtained from bitewing and periapical techniques, it is important to define which technique is used. 4. The number of the interproximal overlapping was the largest medial side of the maxillary second molar, while the smallest at the distal side of the mandibular second premolar. And the overall number of the interproximal overlapping was more (538) in the periapical technique than in the bitewing technique (372). 5. The interproximal dental carious lesions were detected more (74) on the bitewing films than on the periapical ones (23). The fact was resulted from the small number of interproximal overlapping and relative easi- ness of obtaining horizontal angulation in taking the bitewing radiographs.