• Journal of Oral Medicine and Pain
• /
• v.16 no.1
• /
• pp.95-102
• /
• 1991

The purpose of this study carried into the Electric pulp test for having knowledge of the difference of each one's stimulant threshold in normal teeth, the stimulant threshold at 10:00 A.M. and 3:00 P.M. in the same teeth, the differendce of the stimulant threshold between dental caries and normal contralateral teeth. In this study, 27 students aged between 22 and 24 years were selected from a pool of students who are sttending school of dentistry, chosun university who did not possessed dental disease like the dental caries, periodontal disease and restoration etc., and 30 outpatients who possessed dental caries(++). The obtained results were as follows : 1. The stimulant thresholds of the premolars and canine were higher than that of the incisors. 2. The stimulant thresholds of the carious teeth were lower than that normal contralateral teeth. 3. There were no difference stimulant threshold at 10:00 A.M. and 3:00 P.M.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.21 no.2
• /
• pp.525-532
• /
• 1994

The purpose of this report was to evaluate the effect of Dental Electronic Anesthesia on pain inhibition for clinical use. The subject for this study were 30 children whose Frankl behavioral rate is positive. The subjects was divided into two groups, the first group described by control group and the second group described by experimental group anesthetized with Dental Electronic Anesthetic device. And then three kind of treatments were done : extraction of deciduous teeth, application of rubber dam, cavity preparation for preventive resin restoration. 3M Dental Electronic Anesthesia System was used for this study : its electric impulse stimulate the skin surface by external electrode pads. The results were as follows. 1. Degree of the pain & the apprehension decreased in experimental group. 2. Degree of the pain & the apprehension showed statistical differences among three treatments procedures in the control group but, not showed statistical differences in the experimental group.

• The Journal of the Korean dental association
• /
• v.58 no.4
• /
• pp.206-212
• /
• 2020

The infraocclusion is defined as a condition, in which teeth are present with their occlusal surface below the neighboring teeth, and long after, they reach occlusion. The most common cause of infra-occlusion is thought to be ankylosis. The treatment options for patient with infraocclusion of primary molars are observation, restoration and surgical removal of the affected teeth. We report a case of 8 - year - old boy who visited our clinic for consultation of orthodontic treatment. The patient was diagnosed by multiple infraoccluded primary molars with permanent successors. Surgical extraction were performed on primary molars. After follow-up of 7 months period, #44, 45 were erupted and the degree of posterior open bite was decreased.

• The Journal of Advanced Prosthodontics
• /
• v.2 no.2
• /
• pp.50-53
• /
• 2010

BACKGROUND. In order to restore severely attrited teeth properly, surgical intervention in the form of a crown-lengthening procedure may be required. And also, proper diagnosis and treatment sequencing is critical to obtain a successful results. Adequate diagnostic wax-up ensures good esthetics and healthy periodontal tissue. CASE DESCRIPTION. This clinical case report describes a diagnostically based protocol for restoration on mandibular anterior teeth with crown lengthening procedure and the treatment of partially edentulous mandible combined with an edentulous maxilla. In addition, the effort to prevent the combination syndrome was described. CLINICAL IMPLICATION. An interdisciplinary diagnosis and examination through visualization of the desired results ensure conservative and more predictable outcome.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.43 no.1
• /
• pp.60-69
• /
• 2016

Complicated crown-root fracture of permanent incisors cause esthetic, functional, and psychological problems to patients. Therefore, treatment is important and multidisciplinary treatment is required. This case report describes the clinical procedures involved in the treatment of trauma-induced complicated crown-root fractures in the maxillary incisor of two young patients. Conventional root canal treatment and apexification were performed in each patient. To expose the fracture margins to the supragingival level and to reestablish the biologic width, orthodontic extrusions with fixed appliances were performed followed by a retention period. During the retention period, fiber-optic posts and cores were built up and provisional crowns were placed. Finally, ceramic crowns manufactured using a computer-aided design/computer-aided manufacturing (CAD/CAM) system were placed. In both patients, the teeth presented satisfactory functional and esthetic outcomes without relapse. The periodontal tissues were healthy.

• Journal of the Korean Academy of Esthetic Dentistry
• /
• v.25 no.2
• /
• pp.68-78
• /
• 2016

Recently, digital technology has become increasingly prevalent in the dental clinic. Using a milling machine for clinic, it is possible to produce provisional restoration inside the clinic. This can promote large clinical cases such as full mouth rehabilitation with the help of a tabletop scanner, which is capable of semi-adjustable articulator equipment, and a powerful dental CAD software with excellent user convenience. In this case report, a full-mouth rehabilitation was done with digital technology to a 55 year-old female patient, who has lost vertical dimension through the attrition, and has got inclined occlusal plane with unplanned and repeated dental reconstruction. Through the design and milling of the provisional restoration in the clinic and the duplication of these provisionals by double scanning technique, a good functional and esthetic result could be achieved.

• Restorative Dentistry and Endodontics
• /
• v.10 no.1
• /
• pp.135-144
• /
• 1984

This study was undertaken to evaluate the degree of the marginal leakage of composite restoration with 3 brands of dental adhesives by means of the dye penetration at the enamel and dentinal margins. 150 cavities of class V were prepared on the buccal and lingual surfaces of 75 extracted anterior and premolar teeth, which were devided into 3 groups. The cavities were filled with composite resin, Silar$^{(R)}$ (3M) and Heliosit$^{(R)}$ (Vivadent) after application of the dental adhesives, specifically Scotchbond$^{(R)}$ (3M) which is essentially composed with halophosphorus ester of Bis-GMA, Dentin Adhesit$^{(R)}$ (Vivadent) which is polyurethane resin, and Enamel Bond$^{(R)}$ (3M) which is a product of Bis-GMA with low viscosity at internal surfaces and margins of the cavities. All specimens were immersed in $37^{\circ}C$, 0.5% methylene blue solution for 24 hours after thermocycling at $4^{\circ}C$ and $60^{\circ}C$, embedded in acrylic resin, and sectioned with diamond disk into two parts. The sectioned specimens observed with the light microscope. The following results were obtained: 1. The group filled with Scotchbond$^{(R)}$-Silar$^{(R)}$ the other two groups at the enamel margins. 2. No significant difference in the degree of the marginal leakage had appeared between Dentin Adhesit$^{(R)}$-Heliosit$^{(R)}$ group an d Enamel Bond$^{(R)}$-Silar$^{(R)}$ group at the enamel margins. 3. Severe marginal leakage with penetration of dye to the floor of cavity had appeared from the all three groups and no significant difference in the degree of marginal leakage existed between the three groups at the dentinal margins.

• Restorative Dentistry and Endodontics
• /
• v.38 no.3
• /
• pp.134-140
• /
• 2013

Objectives: There has been a growing interest in glass ceramic systems with good esthetics, high fracture resistance and bonding durability, and simplified fabrication techniques using CAD/CAM. The aim of this study is to compare flexural strength before and after heat treatment of two lithium disilicate CAD/CAM blocks, IPS e.max CAD (Ivoclar Vivadent) and Rosetta SM (Hass), and to observe their crystalline structures. Materials and Methods: Biaxial flexural strength was tested according to ISO 6872 with 20 disc form specimens sliced from each block before and after heat treatment. Also, the crystalline structures were observed using field-emission scanning microscopy (FE-SEM, Hitachi) and x-ray diffraction (XRD, Rigaku) analysis. The mean values of the biaxial flexural strength were analyzed by the Mann-Whitney U test at a significance level of p = 0.05. Results: There were no statistically significant differences in flexural strength between IPS e.max CAD and Rosetta SM either before heat treatment or after heat treatment. For both ceramics, the initial flexural strength greatly increased after heat treatment, with significant differences (p < 0.05). The FE-SEM images presented similar patterns of crystalline structure in the two ceramics. In the XRD analysis, they also had similar patterns, presenting high peak positions corresponding to the standard lithium metasilicate and lithium disilicate at each stage of heat treatment. Conclusions: IPS e.max CAD and Rosetta SM showed no significant differences in flexural strength. They had a similar crystalline pattern and molecular composition.

• Journal of the Korean Academy of Esthetic Dentistry
• /
• v.27 no.2
• /
• pp.105-115
• /
• 2018

Not to recreate the final prosthesis is the shortest way to get a successful outcome. In the case of an aesthetic prosthesis, it is important not only the condition of the oral cavity but also the whole harmony in the face such as the interpupillary line and the smile line. But the dental technician creates the prosthesis only based on the oral model. So if you want to prevent the failure of the prosthesis due to discordance with the face, it is a good idea to use patient's facial photography and provisional restorations to reproduce facial features, shapes and aesthetics before switching to a final prosthesis. To prevent the failure of the final prosthesis, it is important to communicate among the patient, the technician and the doctor according to the model diagnosis, facial and oral photos. Then all the technicians will get satisfactory results. In addition, the technician have to understand the form of natural teeth, to analyze and reproduce colors, and to understand materials in order to produce a successful aesthetic prosthesis. From now on, I will explain two parts. At first, the communication in the dental office for the successful production of aesthetic prosthesis through the clinical case. And the second, my opinion for the successful aesthetic prosthesis.

• The Journal of Advanced Prosthodontics
• /
• v.16 no.2
• /
• pp.77-90
• /
• 2024

PURPOSE. The study aims to investigate the influence of the ferrule effect and types of posts on the stress distribution in three morphological types of the maxillary central incisor. MATERIALS AND METHODS. Nine models were created for 3 maxillary central incisor morphology types: "Fat" type - crown 12.5 mm, root 13 mm, and buccolingual cervical diameter 7.5 mm, "Medium" type - crown 11 mm, root 14 mm, and buccolingual cervical diameter 6.5 mm, and "Slim" type - crown 9.5 mm, root 15 mm, and buccolingual cervical diameter 5.5 mm. Each model received an anatomical castable post-and-core or glass-fiber post with resin composite core and three ferrule heights (nonexistent, 1 mm, and 2 mm). Then, a load of 14 N was applied at the cingulum with a 45° slope to the long axis of the tooth. The Maximum Principal Stress and the Minimum Principal Stress were calculated in the root dentin, crown, and core. RESULTS. Higher tensile and compression stress values were observed in root dentin using the metallic post compared to the fiber post, being higher in the slim type maxillary central incisor than in the medium and fat types. Concerning the three anatomical types of maxillary central incisors, the slim type without ferrule height in mm presented the highest tensile stress in the dentin, for both types of metal and fiber posts. CONCLUSION. Post system and tooth morphology were able to modify the biomechanical response of restored endodontically-treated incisors, showing the importance of personalized dental treatment for each case.