PURPOSE. The aim of this study was to evaluate the effect of dimensional stability of splinting material on the accuracy of master casts. MATERIALS AND METHODS. A stainless steel metal model with 6 implants embedded was used as a master model. Implant level impressions were made after square impression copings were splinted using 5 different techniques as follows. (1) Splinted with autopolymerizing resin and sectioned, reconnected to compensate polymerization shrinkage before the impression procedure. (2) Splinted with autopolymerizing resin just before impression procedure. (3) Primary impression made with impression plaster and secondary impression were made over with polyether impression material. (4) Splinted with impression plaster. (5) Splinted with VPS bite registration material. From master model, 5 impressions and 5 experimental casts, total 25 casts were made for each of 5 splinting methods. The distortion values of each splinting methods were measured using coordinate measuring machine, capable of recordings in the x-, y-, z- axes. A one-way analysis of variance (ANOVA) at a confidence level of 95% was used to evaluate the data and Tukey's studentized range test was used to determine significant differences between the groups. RESULTS. Group 1 showed best accuracy followed by Group 3 & 4. Group 2 and 5 showed relatively larger distortion value than other groups. No significant difference was found between group 3, 4, 5 in x-axis, group 2, 3, 4 in y-axis and group 1, 3, 4, 5 in z-axis (P<.0001). CONCLUSION. Both Splinting impression copings with autopolymerizing resin following compensation of polymerization shrinkage and splinting method with impression plaster can enhance the accuracy of master cast and impression plaster can be used simple and effective splinting material for implant impression procedure.
Objectives : The aim of this study was to evaluate the effects of a composite of bone substitute and collagen barrier membrane (bone patch) for local ridge augmentation at peri-implant dehiscence defects on the clinical efficacy and positional stability in dogs. Materials and methods : Implant placement and ridge augmentation procedure were performed at surgically created peri-implant dehiscence defects in canine mandible (n=6). Four treatment modalities were randomly applied: i) bone patch group, ii) Guided bone regeneration (GBR) without pin fixation group (bone graft and collagen membrane), iii) GBR with pin fixation group, and iv) negative control group. After 12 weeks, clinical, micro-CT and histological analyses were performed. Results : Histologic analysis showed that bone patch group had similar results to GBR group and GBR with fixation group in terms of new bone formation. Micro-CT analysis revealed similar results to histologic analysis in terms of total volume maintenance. Operating time was shorter in bone patch group compared to GBR group and GBR with fixation groups. Conclusions : GBR using bone patch could simplify the ridge augmentation procedure with reduced operating time and equivalent biological performance compared to the conventional procedure.
Background: Mandibular third molar removal is the most common surgical procedure encountered in oral and maxillofacial clinics. It also presents the greatest challenges and controversies for surgeons when surgical removal is considered. Furthermore, diverse anesthesia results and success rates are achieved after using the same concentrations of different solutions or the same amounts of local anesthetics. The purpose of this study was to examine the efficiency of using double-cartridge (3.4 ml) 4% lidocaine (high concentration) and 4% articaine with a 1:100000 epinephrine infiltration in the retromolar region for impacted lower third molar surgery. Methods: This double-blind study included 30 patients with symmetrically impacted lower third molars. The patients were randomly selected to receive 4% articaine on one side and 4% lidocaine on the other, as a local anesthetic for third molar surgery. The onset, duration of soft-tissue numbness, pulpal sensitivity, amount of additional local anesthetic needed, pain score during the surgical procedure, and duration of the operation were recorded. Results: The results of this research indicate that 86.7% of the operations in the 4% articaine group and 83.3% of those in the 4% lidocaine group were successful. Furthermore, the outcomes in both groups were not statistically significant (P > 0.05). Numbness onset occurred faster in the articaine group than it did in the lidocaine group. However, the duration of soft-tissue anesthesia and pain scores recorded immediately postoperatively were similar. Conclusion: It is concluded that 4% lidocaine and 4% articaine had a similar infiltration efficacy in the retromolar region and both local anesthetics are adequate for impacted lower third molar surgery. There were no statistically significant differences between the two local anesthetics regarding pain control and the duration of soft-tissue numbness during the procedure.
Statement of problem: The previous unilateral bite force recorder has several limitations for taking long time for measuring and causing discomfort to subjects. Because of these reasons, it could not use widely for epidemiological researches. However, 'Dental Prescale System' which is new equipment for measuring bite force, is more convenient for measuring bite force than previous unilateral recorder. Purpose: The purpose of this study was to compare a new technique(Dental Prescale System) using pressure sensitive foils for recording of maximal jaw closing force with conventional measurement using unilateral bite force recorder Material and method: This studies included 22 healthy dental students in college of dentistry Yonsei university in Rep of Korea. Mean age was 23.9 years. All subjects had continuous dental arches and no significant malocclusion or signs from the teeth and craniomandibular system. The Dental Prescale System (Fuji Film, Tokyo, Japan) consists of a horseshoe-shaped pressure sensitive sheet (50H, R type) and a computerized scanning system.(FPD705) We also used unilateral bite force recorder(Denbotics Co. Seoul, Rep.Korea) for comparing with Dental Prescale. Results and conclusion: The total bite force recorded with Dental Prescale System (1423 N) was systematically higher than that recorded by unilateral bite force recorder. (256 N) However, the maximum bite force values measured in the two ways were significantly correlated (r=0.46, p<0.05). The Dental Prescale bite force calculated for first molar (208 N) was lower than that recorded by unilateral bite force recorder. (256 N) The two values were also very significantly correlated. (r=0.66. p<0.001) There were significantly different in bite force between two measurement methods. The reasons were first, unilateral bite force recorder measured only the bite force of a part of teeth, and Dental Prescale measured the total teeth force. Second, in measurement, a difference in muscle contraction appeared by an extent of mouth-opening. Third, unilateral bite force recorder has the reducing effect of the bite force by protective tape. Fourth, Dental Prescale has limitations during the computer scanning procedure. Therefore, Dental Prescale System is considered to be a very promising alternative to be conventional bite force recording methods.
Background: Dental phobia or anxiety of patients is the serious impediment to appropriate and effective dental treatment. Sedative technique helps to mitigate patients' fear and anxiety thus make them more cooperative and familiar to dental practices. With increasing attention to sedative dentistry in dentists, educational requirements and technical qualification also become stricter but actual survey on recent sedative dentistry has not been reported yet. Especially there is insufficient study reporting the survey of sedative dentistry subjected to Korean adults. In this paper, we conducted a survey study on the actual condition and practice related to sedation with a questionnaire to dentists in South Korea. Methods: The survey was done for members of The Korean Dental Society of Anesthesiology (KDSA), who had great interest in sedation and for whom survey-by-mail was convenient. 472 members of The KDSA having dental license and solid address and contact information were subjected to the survey by sending them survey questions about their sedative techniques and knowledge. In order to increase the response rate, small gifts were presented to those who accurately responded to the survey questions and text messages and phone calls were made to encourage their participation. We collected their responses over two months and examined the returned surveys. Statistical analysis was performed using IBM SPSS Statistics 21 for each question. Results: Out of 472 dentists, 181 responded (38.4% response rate). 63.0% (114 dentists; 77 male and 37 female) of respondents had experience on sedative technique and their average age was $39.8{\pm}7.6$ year. 74 of them were private practitioners, 17 of them were professors (14.9%), 11 of them were dentists-in-service (9.6%), 11 of them were residents (specialist training) (9.6%) and 1 of them was military doctors (0.9%). There were 89 dentists (78.1%) who were specialists or receiving trainings to be specialist, most of whom were pediatric dentists (55, 48.2%) and oral surgeon (31, 27.2%). The most popular route for drug medications was orderly oral, inhalational, intravenous medication. Combination of oral and inhalational medications or single use of intravenous medication was the most common. The most preferred sedative drug was pocral in oral sedation and midazolam in intravenous sedation. 48.2% of practitioners responded that they experienced side effects and emergency situations. Airway obstruction was the most frequent. Conclusions: Results from the survey show that the protocol and system for sedative dentistry have been improved compared to the past. Nevertheless, quality of emergency protocol, monitoring devices and preparation of sedative drugs was still insufficient to achieve safe sedative procedure. This study acquires novelty since actual survey on recent sedative dentistry for adult patients has not been reported yet.
치과위생사의 감염관리 실천도를 측정하는 척도를 개발하고 타당화하기 위해 254명의 치과위생사를 대상으로 설문조사를 실시하였다. 예비척도는 리커트 4점 척도로서 21개의 문항으로 구성되었으며, 신뢰도 분석, 탐색요인분석, 확인요인분석을 통해 척도의 차원과 항목을 축소하고 신뢰도와 타당도를 검증하였다. 1. 탐색요인분석과 신뢰도 분석을 통해 4개 요인과 12개의 항목으로 척도를 수정하였다. 수정된 척도의 요인은 '예방접종 및 정기검진'(2항목), '기구 소독 및 멸균'(3항목), '손위생 관리'(4항목), '개인 보호'(3항목)가 추출되었으며, 전체분산 중 58.296%를 설명하고 있다. 예비척도 중 '환경 관리' 요인이 제외되었다. 2. 확인요인분석을 통해 한 문항을 제외하였다. 최종적인 측정모형은 4개 요인과 11개 항목으로 구성되었으며, 모형의 적합도는 $x^2$= 79.593(df = 38, 0 = 0.000), RMR= 0.045, GFI = 0.940, CFI = 0.904, AGFI = 0.896, NFI = 0.837, TLI = 0.861, RMSEA = 0.67로 나타나 대체로 기준을 충족하였다. 모든 측정변수의 요인부하량은 유의하였으나(p < 0.001), 세 변수만이 0.7 이상으로 나타났다. 평균분산추출값과 구성개념신뢰도는 대체로 기준을 충족하지 못하였으나, 모든 요인의 평균분산추출값은 각 요인간 상관관계제곱값 보다 크게 나타났다. 3. 요인분석을 통해 추출한 네 개의 요인이 치과위생사의 '감염관리 실천률 인식'에 미치는 영향을 알아보기 위해 네 요인을 독립변수로 선정하고 실천률 인식을 종속변수로 선정하여 회귀분석을 실시하였다. $R^2$는 0.304, 수정된 $R^2$은 0.431, F = 25.813, p = 0.000이며, '손위생 관리'를 제외한 세 변수의 회귀계수는 통계적으로 유의하게 나타났다.
연구 목적: 본 연구의 목적은 가장 최근에 수행된 치과의원의 경영 분석 자료를 바탕으로 상향식 방법을 적용하여 임플란트 원가를 산정하는데 있다. 연구 재료 및 방법: 본 연구에서는 진료행위 각각에 소요되는 직간접 비용을 모두 합산하는 상향식 방식으로 산출하였다. 상향식 원가계산의 경우 총원가는 인건비, 재료비, 관리비, 의료사고비용, 투자자본의 기회비용 등으로 구성이 된다. 이를 임플란트 원가 구성요소로 구분하면 인건비, 기공료, 재료비, 감가상각비 등의 직접비용과 관리운영비를 포함하는 간접비용, 치과의원 투자분에 대한 기회비용으로 구성된다. 결과: 상부보철물의 종류에 따라 금속관일 경우 1,449천원, 도재관일 경우 1,583천원, 오버덴쳐의 경우 2,471천원으로 산정되었다. 임플란트 원가는 인건비, 재료비, 관리비, 기타비용으로 나누어지는데 총 원가 중 인건비가 차지하는 비율은 50%, 재료비 33%, 관리비 15%, 기타비용2%로 나타났다. 이를 직접비, 간접비, 투자비용으로 구분하면 상부 보철물이 금속관일 경우 각각 원가의 83%, 15%, 2%를 차지한다. 결론: 전체 원가 중 인건비가 73만원(약 50%)으로 가장 많은 비중을 차지한다. 상향식 원가계산 결과 관행수가에 근접하게 나타났는데 금속관의 경우 145만원, 도재관일 경우 158만원 추계되었다.
Purpose: The current study investigates the feasibility of a platform for a nationwide dose monitoring system for dental radiography. The essential elements for an unerring system are also assessed. Materials and Methods: An intraoral radiographic machine with 14 X-ray generators and five sensors, 45 panoramic radiographic machines, and 23 cone-beam computed tomography (CBCT) models used in Korean dental clinics were surveyed to investigate the type of dose report. A main server for storing the dose data from each radiographic machine was prepared. The dose report transfer pathways from the radiographic machine to the main sever were constructed. An effective dose calculation method was created based on the machine specifications and the exposure parameters of three intraoral radiographic machines, five panoramic radiographic machines, and four CBCTs. A viewing system was developed for both dentists and patients to view the calculated effective dose. Each procedure and the main server were integrated into one system. Results: The dose data from each type of radiographic machine was successfully transferred to the main server and converted into an effective dose. The effective dose stored in the main server is automatically connected to a viewing program for dentist and patient access. Conclusion: A patient radiation dose monitoring system is feasible for dental clinics. Future research in cooperation with clinicians, industry, and radiologists is needed to ensure format convertibility for an efficient dose monitoring system to monitor unexpected radiation dose.
본 증례에서는 특별한 주의가 필요한 장애인을 위한 효율적이고 전문적인 의료 전달을 위해 여러 과와의 협의를 통한 진료가 필요함을 알리고 있다. 특히 기관절개관을 가진 환자의 마취관리와 치과치료를 시행함에 있어서 전신상태 및 기관절개관에 대한 이해와 주의가 필요하다. 1. 충치치료를 주소로 내원한 22세 남환에서 기관내삽관의 활용을 통해 전신마취 하에서 치과치료를 성공적으로 전달하였다. 2. 환자는 발작의 위험성을 가지고 있었으며, 안전한 치과치료를 위해 전신마취를 행동조절의 방법으로 선택하였다. 3. 기관내삽관에는 여러 종류가 있으며, 그 중 전신마취 하에 호흡보조를 할 수 있는 종류는 커프를 가진, 이중내강의 형태로 된 관이다. 따라서, 기관내삽관을 가진 환자에서 전신마취 하 치과치료를 진행하기 위해서는 기관내삽관의 형태에 대한 적절한 평가 및 처치가 선행되어야 한다.
치과의사는 혈우병 환자의 치료 시 주의사항에 대해 잘 알고 있어야 한다. 혈우병 환자의 내원 시 소아과 의사 및 혈우재단 등 전문가에게 의뢰하여 환자의 상태에 대한 자문을 얻어야 하고, 치과 치료 시 적절한 계획 하에 최소의 침습적인 치료가 행해지도록 노력해야 하며, 응급 상황을 대비하여 지혈방법을 습득해야 한다. 또 환자와 보호자에게 평소 구강 관리의 중요성을 일깨워 침습적 치과 치료의 빈도를 줄일 수 있도록 해야 한다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.