• 대한소아치과학회지
• /
• 제35권2호
• /
• pp.367-375
• /
• 2008

교정치료 시 고정원은 항상 염두에 두면서 치료를 진행해야 하는 중요한 요소이다. 전통적인 고정원을 이용한 치료는 환자의 적극적인 협조를 필요로 하고 원하는 치아이동에 대한 반작용이 나타날 수 있는 등의 부작용을 가지고 있다. 그러므로 보다 견고한 구강 내 고정원이 요구되어져 왔으며 이를 위해 miniscrew가 임상에서 흔히 이용되고 있다. Miniscrew를 통한 고정원의 확보는 구외력 의존도 감소, 치료기간의 단축, 식립 후 즉시 교정력 적용, 환자의 협조도 불필요, 식립의 간편성, 저렴한 비용 등의 장점을 가지고 있다. 그러나 성장기 환자는 성인에 비해 골질이 좋지 않아 miniscrew의 성공률이 성인에 비해 낮다. 그러나 일단 고정에 성공하면 많은 교정치료 시 매우 유용하게 이용할 수 있다. 본 증례는 혼합치열기 환자를 miniscrew를 이용하여 정중이개 및 정중선 불일치, 매복치에 대한 양호한 교정치료를 하였기에 보고하는 바이다.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제37권
• /
• pp.33.1-33.9
• /
• 2015

Background: The porion (Po) is used to construct the Frankfort horizontal (FH) plane for cephalometrics, and the external auditory meatus (EAM) is to transfer and mount the dental model with facebow. The classical assumption is that EAM represents Po by the parallel positioning. However, we are sometimes questioning about the possible positional disparity between Po and EAM, when the occlusal cant or facial midline is different from our clinical understandings. The purpose of this study was to evaluate the positional parallelism of Po and EAM in facial asymmetries, and also to investigate their relationship with the maxillary occlusal cant. Methods: The 67 subjects were classified into three groups. Group I had normal subjects with facial symmetry ($1.05{\pm}0.52mm$ of average chin deviation) with minimal occlusal cant (<1.5 mm). Asymmetry group II-A had no maxillary occlusal cant (average $0.60{\pm}0.36$), while asymmetry group II-B had occlusal cant (average $3.72{\pm}1.47$). The distances of bilateral Po, EAM, and mesiobuccal cusp tips of the maxillary first molars (Mx) from the horizontal orbital plane (Orb) and the coronal plane were measured on the three-dimensional computed tomographic images. Their right and left side distance discrepancies were calculated and statistically compared. Results: EAM was located 10.3 mm below and 2.3 mm anterior to Po in group I. The vertical distances from Po to EAM of both sides were significantly different in group II-B (p=0.001), while other groups were not. Interside discrepancy of the vertical distances from EAM to Mx in group II-B also showed the significant differences, as compared with those from Po to Mx and from Orb to Mx. Conclusions: The subjects with facial asymmetry and prominent maxillary occlusal cant tend to have the symmetric position of Po but asymmetric EAM. Some caution or other measures will be helpful for them to be used during the clinical procedures.

• 대한치과보철학회지
• /
• 제36권2호
• /
• pp.245-257
• /
• 1998

This study was performed to measure the changes of the mandibular movement and the masticatory muscular activities - anterior temporal and masseter muscle of both side - reflected by intentional increase of anterior guidance angie. For this study, 5 volunteers (3 males and 2 females with average age of 24.0) were selected. Each volunteer had Angle's classification I and did not have any missing tooth except third molar and any extensive restorations. Metallic guide plate was made at volunteer's working model fabricated by improved dental stone and cemented to the palatal surface of maxillary central incisor using resin cement(Panavia $21^{(R)}$) and then adjusted not to give any occlusal interferences at intercuspal position. The activity of masticatory muscles and the changes of mandibular movement were recorded by EMG and Sirognathograph in Biopak analysing system(Bioresearch Inc., Milwaukee, Wisconsin, USA). Measurement was done at before experiment, immediatley after placement, 1 week after placement, immediately after removal, and 1 week after removal. The results were as follows: 1. Moderate phonetic disturbance and mild headache were occured to 3 volunteers for 2 days after setting and 1 volunteer had positive reaction to percussion and slight midline diastema. But all of these clinical signs were diappeared 1 week after removal and the other volunteer did not have any special clinical sign. 2. In the EMG of the mandibular rest position, the mean value of anterior tempotal muscle was increased immediately after placement(p<0.01) and then decreased 1 week after placement(p<0.05) and increased 1 week after removal(p<0.05) but not recovered as before experiment. The mean value of masseter muscle was decreased during the experiment period. 3. In the EMG during mandibular protrusive movement, all muscular activity was decreased during the experiment period. Reduced activity was not recovered 1 week after removal(p<0.03). 4. During the habitual opening, anteroposterior movement of mandible was decreased immediately after placement(p<0.05) and then increased 1 week after placement but not statistically significant(p>0.1). Vertical movement was not shown significant difference during the experiment period(p>0.1). Lateral movement was decreased immediately after placement(p<0.05) and then increased 1 week after placement but not recovered as before experiment. The opening and closing velocity of mandible was shown minor changes but not statistically significant. 5. During the habitual opening, anteroposterior movement of mandible was decreased 1 week after placement(p<0.05) and then increased immediately after removal and recovered 1 week after removal as before experiment. Vertical movement was not shown significant changes. Lateral displacement of mandible was increased continuously and recovered 1 week after removal. Opening velocity was temporarily increased immediately after removal but recovered and closing velocity was not shown significant changes. 6. During the right side chewing, anteroposterior movement of mandible was increased immediately after removal but recovered and vertical movement was not shown statistically significant results. Lateral displacement and velocity of mandible were not shown significant results. 7. During the left side chewing, the changes of mandibular movement pattern were not shown statistically significant results.

• 구강회복응용과학지
• /
• 제38권4호
• /
• pp.242-248
• /
• 2022

최근 CAD/CAM 기술의 발달을 통해 의치 제작에도 활용되고 있다. 디지털 방식으로 의치를 제작했을 때 전통적인 방법과 비교하여 제작 과정을 용이하게 하고 내원 횟수 감소, 오차 감소 등의 이점을 갖는다. 본 증례는 오래된 의치의 사용으로 인해 수직 고경 회복이 필요한 환자에서 CAD 프로그램을 이용하여 수직 고경을 증가시켰으며 최종 의치는 밀링방식을 통해 monolithic disc를 이용하여 제작한 증례이다. 기존 의치를 이용하여 중심위를 인기하였으며 구내 스캔과 기존 의치 모델 스캔을 정보를 이용하여 시적용 의치를 제작하고 환자에게 장착해 정중선, 교합관계 등을 평가하였다. 시적용 의치 평가를 기반으로 밀링방식 및 monolithic disc를 이용하여 최종 의치를 제작하였고 최종 의치는 기능적 및 심미적으로 만족스러운 결과를 보였다.

• 대한치과교정학회지
• /
• 제35권1호
• /
• pp.60-68
• /
• 2005

부정교합의 평가는 질적, 양적인 면에서 모두 평가되어야 한다. 이는 부정교합의 경중도의 평가뿐만 아니라 이의 치료가 얼마나 어려운가를 반영할 수 있는 치료의 난이도로 발전되어야 한다. 이러한 부정교합의 경중도와 치료의 난이도를 객관적이고 효율적으로 측정하기 위한 방법의 개발이 필요하다. 이는 치과 교정학에서 치료의 효과 및 효율의 평가에서 치료난이도를 반영하는 부정교합 경중도 측정을 가능하게 하여 교정치료의 양적 그리고 질적 평가를 가능하게 할 것이다. 본 연구는 부정교합의 객관적 정량분석을 위한 연구로써 객관적 부정교합의 경중도와 주관적 치료 난이도를 측정하고 이들간의 상관관계를 연구하고자 하였다. 이를 위하여, 100쌍의 교정용 치아모형을 이용하여 경험 있는 8명의 치과교정의가 주관적인 치료의 난이도를 평가하기 위하여 치료의 어려움과 예상치료기간을 추정하였으며. 객관적인 부정교합의 경중도를 측정하기 위하여 저자는 동료평가등급 지수 (PAR index) 를 사용하여 각 부정교합의 구성요소 별 경중도를 계측하였다. 이들간의 상관관계의 조사에서 객관적으로 계측한 부정교합의 경중도와 평가단의 치료 예상난이도 사이에는 유의한 관련성이 있었으며. 특히 상악 전치부 배열, 구치부교합, 수평피개도, 수직피개도 그리고 정중선 일치도에서 높은 상관성을 보였다 본 연구를 통하여 객관적으로 계측된 부정교합의 경중도가 치과 교정의사가 느끼는 주관적 치료 난이도에 미치는 영향을 조사할 수 있으며. 이는 치료의 주관적 난이도를 내포하는 새로운 국내형 교합지수 개발에 도움이 될 것으로 사료된다회된 법랑질 깊이가 유의성 있게 감소하였다. (p<0.05). 접착레진으로 부착된 군 (Group 4)은 법랑질 탈회가 거의 나타나지 않았다. 이상의 연구결과는 교정치료 시 법랑질 탈회 가능성을 줄이기 위해서 브라켓 부착 시 실런트 레진의 도포가 유용함을 시사하였다..5\;{\mu} g/mL)\;piroxicam(3.5\pm0.3\l{\mu}g/mL)$,으로 유의성이 있었으며(p<0.05), 흡수 속도상수는 piroxicam-$\beta$-cyclodextrin$(3.00\pm0.49\;h^{-1}), \;piroxicam(1.80\pm0.21\;h^{-1})$이었다(p<0.1). 이상의 결과에서, piroxicam-$\beta$-cyclodextrin정은 piroxicam 확산정과 비교하여 흡수되는 정도는 서로 비슷하지만 흡수 초기의 혈장농도 및 흡수속도상수에서 보다 빠른 약동학적 특성을 나타내었다.삼차원 입체조형치료를 받은 환자에 대해서는 앞으로 추적 관찰이 좀 더 필요할 것으로 생각된다. 앞으로 국소관해를 높이기 위한 방사선치료방법과 전신적 전이율의 감소를 위한 항암요법에 관한 연구가 필요할 것으로 생각된다.다. MD-BED $Gy_3$는 직장합병증 발생과의 관계는 통계적으로 유의하였고, 방광합병증과는 유의하지 않았다. 직장합병증과의 연관성은 MD-BED $Gy_3$보다 개별 환자의 직장전벽 총 선량 BED값인 R-BED $Gy_3$가 훨씬 더 높았다

• 구강회복응용과학지
• /
• 제17권4호
• /
• pp.283-305
• /
• 2001

The purpose of this study was to analyze the stress distribution of condylar regions and edentulous mandible with implant-supported cantilever prostheses on the certain conditions, such as amount of load, location of load, direction of load, fixation or non-fixation on the condylar regions. Three dimensional finite element analysis was used for this study. FEM model was created by using commercial software, ANSYS(Swanson, Inc., U.S.A.). Fixed model which was fixed on the condylar regions was modeled with 74323 elements and 15387 nodes and spring model which was sprung on the condylar regions was modeled with 75020 elements and 15887 nodes. Six Br${\aa}$nemark implants with 3.75 mm diameter and 13 mm length were incorporated in the models. The placement was 4.4 mm from the midline for the first implant; the other two in each quardrant were 6.5 mm apart. The stress distribution on each model through the designed mandible was evaluated under 500N vertical load, 250N horizontal load linguobuccally, buccal 20 degree 250N oblique load and buccal 45 degree 250N oblique load. The load points were at 0 mm, 10 mm, 20 mm along the cantilever prostheses from the center of the distal fixture. The results were as follows; 1. The stress distribution of condylar regions between two models showed conspicuous differences. Fixed model showed conspicuous stress concentration on the condylar regions than spring model under vertical load only. On the other hand, spring model showed conspicuous stress concentration on the condylar regions than fixed model under 250N horizontal load linguobuccally, buccal 20 degree 250N oblique load and buccal 45 degree 250N oblique load. 2. Fixed model showed stress concentration on the posterior and mesial side of working and balancing condylar necks but spring model showed stress concentration on the posterior and mesial side of working condylar neck and the posterior and lateral side of balancing condylar neck under vertical load. 3. Fixed model showed stress concentration on the posterior and lateral side of working condylar neck and the anterior and mesial side of balancing condylar neck but spring model showed stress concentration on the anterior sides of working and balancing condylar necks under horizontal load linguobuccally. 4. Fixed model showed stress concentration on the posterior side of working condylar neck and the posterior and lateral side of balancing condylar neck but spring model showed stress concentration on the anterior side of working condylar neck and the anterior and lateral side of balancing condylar neck under buccal 20 degree oblique load. 5. Fixed model showed stress concentration on the anterior and lateral side of working condylar neck and the posterior and mesial side of balancing condylar neck but spring model showed stress concentration on the anterior side of working condylar neck and the anterior and lateral side of balancing condylar neck under buccal 45 degree oblique load.. 6. The stress distribution of bone around implants between two models revealed difference slightly. In general, magnitude of Von Mises stress was the greatest at the bone around the most distal implant and the progressive decrease more and more mesially. Under vertical load, the stress values were similar between implant neck and superstructure vertically, besides the greatest on the distal side horizontally. 7. Under horizontal load linguobuccally, buccal 20 degree oblique load and buccal 45 degree oblique load, the stress values were the greatest on the implant neck vertically, and great on the labial and lingual sides horizontally. After all, it was considered that spring model was an indispensable condition for the comprehension of the stress distributions of condylar regions.