• 대한치과의사협회지
• /
• 제51권10호
• /
• pp.556-564
• /
• 2013

Modern endodontics has essentially changed following the introduction of the dental microscope since 1990's. One of main advantage of using dental microscope in nonsurgical endodontic treatment is enhancing clinician's ability and quality of treatment through illumination and magnification. Scopes of dental microscope in nonsurgical endodontics are finding a missed or additional root canal and a tooth crack, management of procedural errors, and others. These improvements in technology will result in greater confidence in treatment and better success in clinical practice.

• 대한치과의사협회지
• /
• 제55권8호
• /
• pp.542-555
• /
• 2017

1. Diagnosis Diagnosis of Crack, Direct pulp capping 2. Access opening Find the calcified canal orifice Removal of dentin shelf Obtaining the MB2 canal (MB2, MB3, DB2) 3. Perforation repair during endodontic treatment 4. Removal of the separated files 5. Open apex treatment 6. Void removal on CWT procedure 7. Re-endodontic treatment Removal of restorative material filled in pulp chamber Post removal Identification and removal of residual gutta-perch 8. Surgical endodontic treatment In each case will overview how to use a dental microscope.

• Restorative Dentistry and Endodontics
• /
• 제40권3호
• /
• pp.241-248
• /
• 2015

Variation in root canal morphology, especially in maxillary first molar presents a constant challenge for a clinician in their detection and management. This case report describes the successful root canal treatment of a three rooted right maxillary first molar presenting with three canals each in the mesiobuccal and distobuccal roots and one canal in the palatal root. The clinical detection of this morphologic aberration was made using a dental operating microscope, and the canal configuration was established after correlating and computing the clinical, radiographic and cone-beam computed tomography (CBCT) scan findings. CBCT images confirmed the configuration of the canals in the mesiobuccal and distobuccal roots to be Al-Qudah and Awawdeh type (3-2) and type (3-2-1), respectively, whereas the palatal root had a Vertucci type I canal pattern. This report reaffirms the importance of careful examination of the floor of the pulp chamber with a dental operating microscope and the use of multiangled preoperative radiographs along with advanced diagnostic aids such as CBCT in identification and successful management of aberrant canal morphologies.

• 구강회복응용과학지
• /
• 제30권4호
• /
• pp.324-328
• /
• 2014

한국인에서는 하악 소구치의 변이가 매우 드물게 나타나며, 변이는 하악 소구치 근관치료시 성형과 세정으로 자극원의 제거를 어렵게 하여 근관치료의 실패를 야기할 수 있다. 본 증례에서는 C형의 드문 근관 형태를 가지는 하악 제1소구치를 CBCT를 촬영하여 복잡한 치아의 내부 형태를 확인한 후, 치과용 현미경을 사용해 확대된 시야와 개선된 조명하에서 성공적으로 근관치료 하였다.

• Restorative Dentistry and Endodontics
• /
• 제43권3호
• /
• pp.35.1-35.7
• /
• 2018

The aim of this article was to showcase the endodontic management of a maxillary first molar with an unusual crown and root anatomy. Clinical diagnosis of the roots and root canal configuration was confirmed by a cone-beam computed tomography (CBCT) and the detection of the canals was made using a dental operating microscope. CBCT images revealed the presence of 5 roots with Vertucci type I canal configuration in all, except, in the middle root which had 2 canals with type IV configuration. The 6 canal orifices were clinically visualized under the dental operating microscope. Clinicians should familiarize themselves with the latest technologies to get additional information in endodontic practice in order to enhance the outcomes of endodontic therapy.

• 대한치과보철학회지
• /
• 제42권1호
• /
• pp.94-109
• /
• 2004

Statement of problem : Several domestic dental implants have been developed since dental treatment being implants are increasing and popularized. However, they have not been used in domestic market like imported goods. Material and methods : This study was carried out to compare domestic and imported implants in aspect of fitness, dental implant fixture and abutment screw using scanning electron microscope. All experiments were performed under dry condition. Results : 1. Only in aspect of relation of dental implant fkxture and abutment screw, except only one group with point contact, good fitness was existed. 2. Home products must presevere in their efforts, so as excellent to fit.

• Tribology and Lubricants
• /
• 제24권1호
• /
• pp.44-48
• /
• 2008

The wear characteristics of the gold alloy dental prosthesis have been investigated. The wear tests were performed by using a pin-on-disk wear tester at room temperature. Vickers hardness and fracture toughness measurement of dental materials were preformed. Microscopic observations on worn surfaces of specimens were conducted by microscope. The friction coefficient of the gold alloy dental prosthesis was investigated according to weight and slinging velocity. The hardness of the gold alloy dental prosthesis were similar and a half of the enamel of natural teeth.

• 대한치과의사협회지
• /
• 제55권8호
• /
• pp.556-564
• /
• 2017

Endodontic surgery is a procedure to treat apical periodontitis or abscess in cases that did not heal after nonsurgical treatment or retreatment. This might include situations with persistent intracanal infection after root canal treatment. Other reasons might be found in extraradicular infection, such as bacterial biofilm on the apical root surface or bacteria within the lesion. For many years, the treatment standard was the traditional approach with surgical burs and amalgam for root-end filling. Endodontic microsurgery is the most recent step in the evolution of endodontic surgery, applying not only ultrasonic tip and biocompatible filling materials but also incorporating high-power magnification and illumination. Although many studies have been published that advocate the use of modern technique, the traditional techniques are still widely used in the surgery community. The purpose of this study was to demonstrate the endodontic microsurgery procedure including the root-end preparation and filling with the use of a surgical operating microscope.

• 대한치과기공학회지
• /
• 제25권1호
• /
• pp.29-40
• /
• 2003

This study was aimed to verify a comparison by dental alloys upon the marginal fitness of dental prosthesis. Firstly, we waxed up on 45 epoxy resin dies, pressed the margin with hands, and identified the marginal fitness with microscope. And we made a single direct spruing system type of sprue by 3 dental alloys - metal crown alloys, PFM crown alloys, and gold crown alloys - each 15, total 45 waxing up, adjusting W/P ratio and invested the cast ring. Then, we made the dental prosthesis using the electric casting machine. In these processes we followed the manufacturer's instructions, in order to maintain the other conditions from the inner and outer, which included investment and burning out. After we tried on the dental prosthesis on epoxy resin dies, we have got the means of marginal gap at 9 points with same distances, around the cervical line which was checked already, using microscope($\times$300). The results of this study were as follows : 1. Metal crown alloys showed 2.9% better in marginal fitness than PFM crown alloys, and the difference was not statistically significant(P=0.497). 2. Gold crown alloys showed 31.3% better in marginal fitness than Metal crown alloys, and the difference was statistically significant(P=0.004). 3. Gold crown alloys showed 32.4% better in marginal fitness than PFM crown alloys, and the difference was statistically significant(P=0.002). 4. We saw that Gold crown alloys was the best dental alloys in the marginal fitness among the three.(P=0.049).

• 대한치과의사협회지
• /
• 제55권8호
• /
• pp.565-573
• /
• 2017

Root canal perforations are defined as the communication between the pulp cavity, the periodontal tissue and alveolar bone. The occurrence of perforations during endodontic treatment is reported to range from 2.3%~12%, which is not a complication rarely happens. Perforations have iatrogenic or pathological etiologies that involve caries or resorption. It leads to inflammation and the destruction of periodontal fibers and alveolar bone, followed by periodontal defects. Mineral trioxide aggregate (MTA) is currently the most indicated material for repair of root perforation, because of its favorable biocompatibility and sealing ability. Using magnification with dental operating microscope enhance the accessibility and visibility to manage the root perforation. It is important to diagnose and repair perforations immediately if possible.