• 대한치과교정학회지
• /
• 제35권5호
• /
• pp.331-340
• /
• 2005

치관경사도 연구는 부정교합 진단과 치료 계획 수립 및 더욱 편리한 교정 장치 개발과 관련한 기초 자료로써 중요시되어 왔다 이에 본 연구는 307명(남자 187명, 여자 120명)의 대표본 성인 정상교합자를 연구대상으로 삼아 자료의 신뢰성 검증이 병행된 치관경사도를 보고함으로써 치과교정학 임상에 도움이 되는 기초자료를 도출해 보고자 시행되었다. 치관경사도 측정을 위하여 정상교합자 표본의 모형 상에서 개개 치아의 근원심 각도 및 협설측 각도를 측정하였으며, 측정 전후 측정자간 및 측정자 내의 신뢰성 검증을 시행하였고. 남녀간의 성차와 기존 연구자료와의 차이를 검증하였다. 연구 결과 본 연구가 대표본을 대상으로 하여 높은 신뢰성 지표를 보였음에도 불구하고 정상교합자의 치관경사도는 변동이 심한 것이 관찰되었고 이에 따라 기존 연구들에 대비하여 임상적으로 유의한 자료상의 차별성은 고찰할 수 없었으며 변동의 양상 또한 선학들이 보고한 자료와 유사하였다 결론적으로 치관경사도 측정시 드러난 정상변동을 해석하여 개별 적합성이 최대로 증진된 효율적인 치과교정장치를 개발하기 위해 좀 더 발전된 수학적·통계학적 모형 구성이 필요할 것으로 생각되었다

• Imaging Science in Dentistry
• /
• 제37권3호
• /
• pp.165-170
• /
• 2007

Purpose: To estimate the shape of root and pulp canal using a dental cone beam computed tomography (CBCT) and to evaluate the accuracy of imaging reformation. Materials and Methods: CBCT images were obtained with incisors, premolars, and molars as the destination by using PSR $9000N^{TM}$ Dental CT system (Asahi Roentgen Ind. Co., Ltd, Kyoto, Japan) and i-CAT (Imaging Sciences International, Inc, USA) cone beam CT unit that have different kind of detector and field of view, and compared these with the shape and the size of actual root and root canal. Results: When the measuring value of cone beam computed tomography concerning to each root's bucco-lingual diameter and mesio-distal diameter was compared with the value of the actual root, it reveals an error range $-0.49{\sim}+0.63$ mm at PSR900N and $-0.97{\sim}+1.14$ mm at i-CAT (P>0.05). It was possible to identify and measure PSR$9000N^{TM}$ Dental CT system to the limit $0.48{\pm}0.06mm$ (P>0.05) and i-CAT CBCT to the limit $0.86{\pm}0.09mm$ (P<0.05) on estimating the size and the shape of root canal. Two kinds of CBCT images revealed the useful reproducibility to estimate the shape of root, but there was the difference to estimate the shape of root according to apparatus. The reproducibility of root shape in the image of three-dimensions at PSR 900N is low such as 0.65 mm in a case of minute root canal. Conclusions: CBCT images revealed higher accuracy of the imaging reformation for root and pulp and clinically CBCT is a useful diagnostic tool for the assessment of root and canal. However, there are different qualities of imaging reformation according to CBCT apparatus and limitation of reproducibility for minute root canals.

• 대한치과보철학회지
• /
• 제41권4호
• /
• pp.421-439
• /
• 2003

Statement of problem : It is difficult to obtain a good titanium casting body using the traditional sprue design because of high melting point of Ti, and the low fluidity and high reactivity of molten Ti. Purpose : A new sprue design for titanium casting bodies needs more trial and error. In order to decrease the number of trial and error, computer simulation(MAGMASOFT, Magmasoft Giessereitechnologie GmbH, Achen, Germany) was used to optimize sprue design in U-shaped implant superstructures. Material and method : Five kinds of sprue were examined for the design of the sprue former for titanium casting: Sprue design A(sprue length 4 mm, rectangular shape, 4 sprues), Sprue design B(sprue length 4 mm. round shape. radius 2 mm, 7 sprues), Sprue design C (sprue length 2 mm, round shape, radius 2 mm, 7 sprues). Sprue design D (sprue length 2 mm, cone shape, large radius 3mm. small radius 2mm, 7 sprues), and Sprue design E( sprue length 2 mm. one unit channel shape). Sprue design F(sprue length 2mm, one unit channel shape) was also examined for the design of the customized sprue former in the Biotan system(Schutz Dental Gmbh, Germany). The casting bodies were taken in Sprue design A, Sprue design D, Sprue design E, and Sprue design F in the Biotan casting system. The numerically predicted defects were compared with the experimental dental castings by the radiographic and sectional view observations. Results : 1. According to the result of computer simulation, turbulence during mold filling was decreased in the sequence of Sprue design F, Sprue design E, Sprue design D, Sprue design C, Sprue design B, and Sprue design A. 2. The calculated solidification time contours indicate that hot spot was moved from the casting body to the sprue button in the sequence of Sprue design A, Sprue design B, Sprue design C, Sprue design D, and Sprue design E. The filling pattern of Sprue design F was similar to that of Sprue design E. 3 The predicted filling pattern shows that less turbulence was found in the customized sprue former than in the standard sprue former. 4. According to the results of the radiographic and cross sectional observations, casting defects less than 1mm were found at the center of a casting body with Sprue design E and Sprue design F. However, larger casting defects of 4mm were found in a casting with Sprue design A. 5. The predicted casting porosity was similar to that of the real casting. Conclusion : One unit channel-type and customized sprue former can be recommended. Further research and developement of various sprue designs using computer simulation in necessary to optimize casting design, in order to reduce the formation of casting defects in implant titanuim super-structures.

• Imaging Science in Dentistry
• /
• 제49권4호
• /
• pp.257-263
• /
• 2019

Purpose: This study was performed to evaluate the dimensional accuracy of digital dental models constructed from cone-beam computed tomographic (CBCT) scans of polyvinyl siloxane (PVS) impressions and cast scan models. Materials and Methods: A pair of PVS impressions was obtained from 20 subjects and scanned using CBCT (resolution, 0.1 mm). A cast scan model was constructed by scanning the gypsum model using a model scanner. After reconstruction of the digital models, the mesio-distal width of each tooth, inter-canine width, and inter-molar width were measured, and the Bolton ratios were calculated and compared. The 2 models were superimposed and the difference between the models was measured using 3-dimensional analysis. Results: The range of mean error between the cast scan model and the CBCT scan model was -0.15 mm to 0.13 mm in the mesio-distal width of the teeth and 0.03 mm to 0.42 mm in the width analysis. The differences in the Bolton ratios between the cast scan models and CBCT scan models were 0.87 (anterior ratio) and 0.72 (overall ratio), with no significant difference (P>0.05). The mean maxillary and mandibular difference when the cast scan model and the CBCT scan model were superimposed was 53 ㎛. Conclusion: There was no statistically significant difference in most of the measurements. The maximum tooth size difference was 0.15mm, and the average difference in model overlap was 53 ㎛. Digital models produced by scanning impressions at a high resolution using CBCT can be used in clinical practice.

• 치과방사선
• /
• 제20권1호
• /
• pp.63-70
• /
• 1990

The aim of this study has been to investigate the growth of the pharynx and sexual differences in the lateral cephalograms of Korean children. The material includes 173 cepalograms from two groups composed of 51 males aged 12.0 years and 39 females aged 12.2 years in group 2, and 45 males aged 7.4 years and 39 females aged 7.5 year in group 1, respectively. In order to study and measure the pharyngeal area the following skeletal landmarks were selected: S, N, A, Ptm, B, H, H', M, S-N, FH and CV, and the angle CV-FH was measured to provide a factor for correction of error resulting from improper head positioning of subjects, especially in relative positions of A and H, while radiography. For each variable the statistically treated data have been presented in the table Ⅱ, Ⅲ, Ⅳ. The main results are presented as follows: 1. In general, the measurements of male were larger than those of female in antero-posterior dimension of pharyngeal cavity, but all variables did not show significant sexual differences in both groups when evaluated statistically. 2. All of the measurements were larger in male than in female in vertical dimensions of pharyngeal cavity in group 2, and there were statistical significances of sexual differences in the variables except M-H', but all variables did not show significant sexual differences in group 1 when evaluated statistically. 3. The dimensional increase of the pharynx by the growth in the vertical dimensions was shown to be greater than in the antero-posterior dimensions in the both sexes.

• Journal of Oral Medicine and Pain
• /
• 제46권2호
• /
• pp.21-32
• /
• 2021

Purpose: The purpose of the present study was to investigate the correlation between age and 34 radiomorphometric parameters on panoramic radiographs, and to provide generalized linear models (GLMs) as a non-invasive, inexpensive, and accurate method to the forensic judgement of living individual's age. Methods: The study included 417 digital panoramic radiographs of Korean individuals (178 males and 239 females, mean age: 32.57±17.81 years). Considering the skeletal differences between the sexes, GLMs were obtained separately according to sex, as well as across the total sample. For statistical analysis and to predict the accuracy of the new GLMs, root mean squared error (RMSE) and adjusted R-squared (R²) were calculated. Results: The adjusted R²-values of the developed GLMs in the total sample, and male and female groups were 0.623, 0.637, and 0.660, respectively (p<0.001), while the allowable RMSE values were 8.80, 8.42, and 8.53 years, respectively. In the GLM of the total sample, the most influential predictor of greater age was decreased pulp area in the #36 first molar (beta=-26.52; p<0.01), followed by the presence of periodontitis (beta=10.24; p<0.01). In males, the most influential factor was the presence of periodontitis (beta=9.20; p<0.05), followed by the number of full veneer crowns (beta=2.19; p<0.001). In females, the most influential predictor was the presence of periodontitis (beta=18.10; p<0.001), followed by the tooth area of the #16 first molar (beta=-11.57; p<0.001). Conclusions: We established acceptable GLM for each sex and found out the predictors necessary to age estimation which can be easily found in panoramic radiographs. Our study provides reference that parameters such as the area of tooth and pulp, the number of teeth treated, and the presence of periodontitis should be considered in estimating age.

• Imaging Science in Dentistry
• /
• 제51권4호
• /
• pp.421-427
• /
• 2021

Purpose: The pulp length to width (PL/W) ratio of the maxillary lateral incisor can be used as an age determination method. This study aimed to investigate the correlation between the PL/W ratio of the maxillary lateral incisor on panoramic radiographs and human chronological age in Indonesian subjects. Materials and Methods: This study analyzed with 134 maxillary lateral incisors on 113 panoramic radiographs from patients who visited the Oral and Maxillofacial Radiology Unit of Dental Hospital Universitas Padjadjaran, Bandung, Jawa Barat, Indonesia, from 2013 to 2018 (age range: between 11 to 60 years). The pulp length was measured from the pulp chamber roof to the apical foramen, and the pulp width was measured on the cervical area of the cementoenamel junction in millimeters using Fiji ImageJ open-source software. Simple linear regression (in SPSS) was used to analyze the results. The reliability of the observers was evaluated. Results: The PL/W ratio of the maxillary lateral incisor was significantly correlated with chronological age (P<0.01). No statistically significant difference was found in the PL/W ratio between the left and right maxillary lateral incisors(P=0.333). There was a very strong correlation (r=0.939) between the PL/W ratio of the maxillary lateral incisor and human chronological age, with the following formula: age= -3.057+1.875×PL/W ratio (R²=0.882, standard error of estimate: 4.659). Conclusion: The PL/W ratio of the maxillary lateral incisor on panoramic radiograph can be used for age determination in Indonesian subjects.

• 대한치과교정학회지
• /
• 제30권5호
• /
• pp.565-578
• /
• 2000

한국인의 치열의 특성을 고려한 Straight-Wire Appliance(SWA)의 제작을 위한 자료를 얻기 위하여 18세 이상 25세 사이의 한국인 성인 정상교합자를 1) 구강악안면부에 기능장애가 없고, 2) 양호한 치열궁 형태와 긴밀한 구치부 교합관계를 가지며, 3) 교합이 전후방적으로 앵글 분류 I 급의 관계를 가지며, 4) 간단한 수복 치료 외에 교정치료나 보철치료를 받지 않았으며, 특히 치아의 순면과 협면의 형태에 변형을 초래한 치과 치료를 받지 않았으며, 5) 단정한 안모를 가진 자를 선발 기준으로 정하여 선발하였다. 선정된 정상 교합자의 상, 하악 인상을 채득하고, 교정용 석고 모형을 제작하였다. 얻어진 치과 석고모형을 분석하여, Andrews의 Six keys to optimal occlusion에 부합되는 표본을 5 명의 숙련된 교정의사들이 선별하여 한국인 성인 정상교합자 치열의 석고 모형 155쌍(남자 92쌍,여자 63쌍)을 얻었다. 이들을 대상으로 정밀측정장비인 Coordinate Measuring Machine(CMM, MPC802, WEGU-Messtechnik, Germany)을 이용하여 3차원 digitization을 시행하고, 계측프로그램을 작성하여 SWA 제작을 위하여 필요한 Angulation, Inclination, In-and-Out, Molar offset angle, Arch-form 등을 측정하였다. 측정을 시행하기 전에, CMM을 이용한 3차 원 digitization의 오차에 대한 검증을 실시하였고, 3차원 digitization과 컴퓨터를 이용한 형태학적 분석법과 기존의 수작업에 의한 분석법의 신뢰도에 대한 분석을 실시하였다. 이상의 연구를 통하여 얻은 결론은 다음과 같다. 1. 치과 석고모형의 3차원 digitization에 CMM을 적용하여 mesh size 0.25 mm, 0.5 mm, 1.0 mm로 등간격 디지타이징하는 것은 모두 받아들일 수 있으며, 측정의 효율성을 고려할 때 1.0 mm간격으로 등간격 디지타이징 하는 것이 바람직하다. 2. 3차원 digitization과 컴퓨터를 이용한 방법이 Andrews의 방법에 기반한 수작업 방법보다 신뢰성이 높다. 3. 3차원 digitization과 컴퓨터를 이용한 방법으로 한국인의 치열의 형태학적 특성에 맞는 SWA의 제작을 위한 자료를 채득하였다.

• 대한의용생체공학회:의공학회지
• /
• 제30권5호
• /
• pp.393-400
• /
• 2009

The present study developed a new technique with no physical object on the flow stream but enabling the air flow measurement and easily incorporated with the devices for cardiopulmonary resuscitation(CPR) procedure. A turbulence chamber was formed in the middle of the respiratory tube by locally enlarging the cross-sectional area where the flow related turbulence was generated inducing energy loss which was in turn converted into pressure difference. The turbulence chamber was simply an empty enlarged air space, thus no physical object existed on the flow stream, but still the flow rate could be evaluated. Computer simulation demonstrated stable turbulence formation big enough to measure. Experiment was followed on the proto-type transducer, the results of which were within ${\pm}5%$ error compared to the simulation data. Both inspiratory and expiratory flows were obtained with symmetric measurement characteristics. Quadratic curve fitting provided excellent calibration formula with a correlation coefficient>0.999(P<0.0001) and the mean relative error<1%. The present results can be usefully applied to accurately monitor the air flow rate during CPR.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제30권5호
• /
• pp.447-456
• /
• 2008

There is close relationship between intraoral structural anomaly and speech- functional problem. Patient with cleft palate patients & ankyloglossia is a typical example, patients with structural anomaly is repaired toward normal structure by operation. Ankyloglossia may cause functional limitation even after adequate surgical treatment speech disorders being one of them. Interindividually, they vary a lot, showing typical articulation specifics. The objective of this study was to evaluate and compare speech for children with ankyloglossia and general public, to determine whether ankyloglossia is associated with articulation problem. We wanted to present criteria for indication of frenectomy. The group of subject is composed of 10 childrens with ankyloglossia and articulation problem, visited the Oral and Maxillofacial surgical unit, dental hospital, Chonbuk university. The average age is 5 Y 7M, M : F ratio is 8 : 2 at the time of speech test. Control group is composed of 10 members without oral structural anomaly. The average age is 5 Y 10M, M : F ratio is 3 : 7 at the time of speech test. Outcomes were measured the PPVT(Peabody Picture Vocabulary Test), PCAT(Picture Consonant Articulation Test), Nasometer II test result obtained each group, statistically measured by Mann-whitney's U Test. There was no difference for 'chronological age-age equivalent' between two group. There was significant difference for 'consonant accuracy' between two group, showed more lower scores in subject group. There was more 'consonant error' in subject group, mostly showed/1/,/s/. A major modality of 'consonant error' was mostly distortion and replacement. There was no significant difference between two group for nasality.