• Journal of dental hygiene science
• /
• v.11 no.2
• /
• pp.69-76
• /
• 2011

The aim of this study was to compare the effects on the resistance to demineralization by the frequency and method of fluoride application in vitro. ninety-one human enamel specimens were embedded in acrylic resin with the labial surfaces exposes. The specimens were divided into 7 groups; (1) non-treated; (2) 1.23% APF gel 1 time; (3) 2% NaF sol 1 time; (4) 2% NaF sol iontophoresis 1 time; (5) 1.23% APF gel 4 time; (6) 2% NaF sol 4 time; (7) 2% NaF sol iontophoresis 4 time. All the groups were immersed in the remineralizing solution (RS) before baseline and divided into 7 test groups of 13 specimens each. All the specimens were exposed to a pH-cycling model which consisted of demineralization (6 hours) and remineralization (18 hours) for 5 days. The Vickers surface micro-hardness number of all the specimens was measured using microhardness tester and the specimen surfaces were observed by scanning electron microscope (SEM). The results were analyzed using one-way ANOVA followed a Tukey's multiple comparison at a significance level of 0.05. The group 7 showed higher level of microhardness after Fluoride application. The group 1 showed lowest level of microhardness but group 7 showed higher level of microhardness after pH-cycling model, there were significant differences between groups. After the modified pH-cycling, the 2% NaF solution with the iontophoresis group showed the best resistance to demineralization(p<0.05). These results were also confirmed by SEM. The fluoride iontophoresis method was the most effective of the regimens in increasing the acid resistance of the enamel.

• Journal of dental hygiene science
• /
• v.12 no.4
• /
• pp.320-328
• /
• 2012

The purpose of this study was to evaluate the tooth whitening and properties of an enamel surface after treatments with tooth bleaching agents that contained dicalcium phosphate dihydrate (DCPD) and hydrogen peroxide (HP). Thirty specimens were obtained from fifteen premolar and were randomly divided into three groups (n=10): 1, 3.5% HP + 0 g DCPD; 2, 3.5% HP + 0.1 g DCPD; 3. 3.5% HP + 1 g DCPD. All groups were bleached 8 hours per day for 14 days. With increasing DCPD concentration, the pH values in the agents increased, making it less acidic. However, there was no statistically significant difference (p>.05). As the concentration of DCPD was increased, the concentration of Ca and P was also increased. In all groups, after the tooth whitening, the tooth color was found to have a value of $L^*$ (p<.05). All groups showed significantly decreased enamel microhardness compared to their baseline (p<.05). The percentage microhardness loss (PML) of the group A1 and A2 were significantly lower than that of group A3. The obvious variation of morphology was observed on enamel surfaces in group A1. Following an analysis of the constituents of enamel surface after bleaching, as DCPD content was increased, the amount of Ca and P was increased. In this study, the experimental results suggest that DCPD/HP agent less demineralization changes such as the erosion morphology and hardness loss without compromising whitening efficiency.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.35 no.3
• /
• pp.113-122
• /
• 2019

Tooth wear is gradually increasing with increasing life expectancy. In particular, it is important to establish a treatment plan in the early stages so that it does not proceed to moderate or severe wear stages. It is essential to diagnose tooth wear accurately in order to plan a treatment for it. There are many risk factors including age, diet, and drugs which affects tooth wear. For the diagnosis of a tooth wear, appropriate index and evaluation method should be used. There were various tooth wear indices such as TWI, Lussi index, BEWE, and TWES. The evaluation method includes clinical examination, dental cast examination and clinical photographs. Recently, a 3D scanner is being used to assess tooth wear. The risk factors, tooth wear evaluation system, the methods of measuring tooth wear, and related literature were reviewed. The strengths and weaknesses of each index and evaluation methods were compared to derive a proper way to diagnose tooth wear.

• Journal of Oral Medicine and Pain
• /
• v.34 no.1
• /
• pp.81-90
• /
• 2009

This study is designed to assess Relationship between clinical diagnosis of Temporomandibular Joint Disorder and diagnostic finding of Cone Beam Computed Tomography(CBCT) The author performed clinical examination for TMD Patients who visited Orofacial pain clinic, Jin-ju ooo Dental office. CBCT(Cone beam computed tomography) was taken for 190 joints in 95 subjects. A Oral medicine and Oral radiologist evaluated CBCT each other. then we compared with that result, Condyle bony changes were classified by no bone change, flattening, erosion and osteophyte. The obtained results were as follow: 1. The Kappa index of the diagnosis between oral medicine and oral radiogist were high, the index of diagnosis by degenerative joint disease were more higher. 2. The Kappa index of panoramic view and CBCT was low, more condylar bone chages were observed by CBCT diagnosis 3. Condylar bone changes of the 54.2% of non-DJD group clinicaly was observed by CBCT diagnosis and no bone changes of the 15.3% of DJD group.was observed by CBCT 4. TMJ pain was associated with erosion of condyle bone change of TMJ. Crepitation and longest duration of TMD were associated with osteophytic bone change.

• Journal of dental hygiene science
• /
• v.16 no.6
• /
• pp.464-471
• /
• 2016

The purpose of this study was to provide information on the labeling of nutritional components on beverages to aid in nutrition education and oral health promotion. The study was conducted to evaluate nutritional effects and risk factors associated with the consumption of different beverages with respect to oral health. A total of 52 products from seven different types of beverages were analyzed for their nutrient content, sugar content, and pH. The sugar content per serving size, based on the nutrition labeling of beverages, was highest for the milk beverages, at 26.6 g, and lowest for the teas, at 13.0 g. According to the recommendation of the World Health Organization (WHO), beverages should contain less than 10% (50 g) total sugars. Our assessment revealed that total sugars in and carbonated beverages were 53.2% and 50.0% of daily value, respectively. Therefore, the milk and carbonated beverages contained more than 50% sugars per serving size, exceeding the recommendation of WHO. The pH of the beverages, from the most acidic to the least acidic were: carbonated beverages, pH 3.0; fruit and vegetable beverages, pH 3.1; mixed beverages, pH 3.6; fruit and vegetable juices, pH 3.7; teas, pH 4.7; coffees, pH 6.6; and milk beverages, pH 6.8. The intake of acidic and sweetened beverages could potentially cause dental caries and erosion. Therefore, the results of this study could be used by oral health care professionals to counsel their patients by providing relevant information on the possibility of oral disease caused by consumption of commercial beverages.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.32 no.6
• /
• pp.592-596
• /
• 2010

The common local causes of active gingival bleeding are the vessel engorgement and erosion by severe inflammation and injury to hypervascularity lesion. Abnormal gingival bleeding is also associated with systemic bleeding disorders (liver disease, leukemia etc.). There are many conventional methods for gingival bleeding control, such as, direct pressure, packing, electrocoagulation, tight suture and application of hemostatic agents. If the continuous gingival bleeding is not stopped in spite of the all local application methods, the medical consultation should be obtained for systemic condition care and the major feeding arterial embolization. This is a case report of severe gingival bleeding and periodontitis control in a patient with liver cirrhosis and oral metastatic lesion of hepatocellular carcinoma. The bleeding lesion was placed in left buccal mucosa and gingiva of the left mandibular molars. The control methods were dental crown removal, primary endodontic drainage, gingival sulcus drainage and maxillary arterial embolization with medical consultation.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.33 no.1
• /
• pp.103-108
• /
• 2006

Loss of permanent molar by multiple dental caries traumatic influence or hereditable disease can cause loss of the vertical dimension in children. However traditionally reconstructive treatment to restore vertical dimension in children has been provided by using simple methods such as celluloid crown form and stainless steel crown. The presented case report describes an alternative treatment modality of vertical dimension by using removalbe appliance This appliance is made with average of facial height and maximal clenching force by using T-scan.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.19 no.3
• /
• pp.239-245
• /
• 2003

The occurrence and pattern of tooth wear are related to cultural, dietary, occupational, and geographic factors, Excessive occlusal wear can result in pulpal exposure, occlusal disharmony, functional inability. Surface loss can be differentiated into 3 general causal categories: i) mechanical loss, which includes attrition, ii) abrasion chemical loss including erosion, and finally iii) a proposed biomechanical category described as abfraction. Considering that mechanical wear is frequently asymptomatic, patients may have parafunctional habit. Structured clinical decision analysis in fixed prosthodontics, as other branches of dentistry do, allows the practitioner to consider the patient's problems more thoroughly based on the clinical data and extenuation factors. This discipline of decision making is intended to complement the experience level and educational background of the clinician in assisting the patient through the decision process. Additionally, CDA helps the clinician define not only the pre-existing condition of the patient prior to irreversible therapy, but also better treatment strategies for the patient over an extended period. The systematic nature of decision analysis stimulates the dentists to pay further attention to those factors, which is germane to the overall complexity of the case, and exclude factors, which have little influence on its final outcome. Further implementation of computerized databases, procedural outcome probabilities based on clinical and laboratory studies and the clinical experience of those who use it, may provide quite a promising future in the field of structured and formalized clinical decision analysis.

• Advances in nano research
• /
• v.12 no.6
• /
• pp.549-566
• /
• 2022

Mining of ore minerals (sfalerite, cinnabar, and chalcopyrite) from the old mine has led in significant environmental effects as contamination of soils and plants and acidification of water. Also, nanoparticles (NP) have obtained global importance because of their widespread usage in daily life, unique properties, and rapid development in the field of nanotechnology. Regarding their usage in various fields, it is suggested that soil is the final environmental sink for NPs. Nanoparticles with excessive reactivity and deliverability may be carried out as amendments to enhance soil quality, mitigate soil contaminations, make certain secure land-software of the traditional change substances and enhance soil erosion control. Meanwhile, there's no record on the usage of Nano superior substances for mine soil reclamation. In this study, five soil specimens have been tested at 4 sites inside the region of mine (<100 m) to study zeolites, and iron sulfide nanoparticles. Also, through using Artificial Neural Network (ANN) and Extreme Learning Machine (ELM), this study has tried to appropriately estimate the mechanical properties of soil under the effect of these Nano particles. Considering the RMSE and R2 values, Zeolite Nano materials could enhance the mine soil fine through increasing the clay-silt fractions, increasing the water holding capacity, removing toxins and improving nutrient levels. Also, adding iron sulfide minerals to the soils would possibly exacerbate the soil acidity problems at a mining site.

• Restorative Dentistry and Endodontics
• /
• v.47 no.3
• /
• pp.29.1-29.10
• /
• 2022

Objectives: This study aimed to investigate the anti-erosive/abrasive effect of resin infiltration of previous deproteinized dentin. Materials and Methods: Dentin slabs were randomly assigned to 3 groups (n = 15): Control (no deproteinization; no resin infiltrant applied), RI (no deproteinization; resin infiltrant applied), and DRI (deproteinization; resin infiltrant applied). After undergoing the assigned treatment, all slabs were subjected to an in vitro cycling model for 5 days. The specimens were immersed in citric acid (0.05 M, pH = 3.75; 60 seconds; 3 times/day) and brushed (150 strokes). Between the challenges, the specimens were exposed to a remineralizing solution (60 minutes). The morphological alterations were analyzed by mechanical profilometry (㎛) and scanning electron microscopy (SEM). Data were submitted to one-way analysis of variance (ANOVA) and Tukey tests (p < 0.05). Results: Control and RI groups presented mineral wear and did not significantly differ from each other (p = 0.063). DRI maintained a protective layer preserving the dentin (p < 0.001). After erosive/abrasive cycles, it was observed that in group RI, only 25% of the slabs partially evidenced the presence of the infiltrating, while, in the DRI group, 80% of the slabs presented the treated surface entirely covered by a resin-component layer protecting the dentin surface as observed in SEM images. Conclusions: The removal of the organic content allows the resin infiltrant to efficiently protect the dentin surface against erosive/abrasive lesions.