• 대한소아치과학회지
• /
• 제25권1호
• /
• pp.127-133
• /
• 1998

An impacted tooth is defined pathologically as a tooth that remains under the mucosa of inside bone without eruption of the crown after a specific period of eruption. Clinically, the term includes those teeth, even before eruption period, that are not expected to erupt due to shape, position and alignment of tooth and lack of space. Canine is prone to impaction more than other teeth because it has the longest time to develop and a complex route from the place of formation to the site of eruption. The impaction incidence of maxillary canine is repoted 0.92$\sim$3.3% (Ferguson, 1990). In 1995 Orton reported that the incidence was 0.92$\sim$2.2% and palatal impaction was more frequent than labial impaction(85%:15%). In 1969 Johnston presented it was more common to woman than to man(3:1). The etiology includes systemic disease such as endocrine disorder, cleidocranial dysostosis, irradiation, Crouzon syndrome, ricketts, facial hemihypertrophy and hereditary and local problems such as ectopic position of the tooth, distance of tooth from its place of eruption, malformation of the tooth, presence of supernumerary teeth, trauma of tooth germ, infection of tooth germ, displacement of tooth germ or tooth by a neoplasm, ankylosis, overretention of deciduous predecessor, lack of space for the tooth in the dental arch and mucosal barrier due to gingival fibrosis. The maxillary canine is especially important as it has the longest root, provides guidance for lateral movement of the mandible and masticatory function and assumes an important role esthetically as it is located at mouth angle. If left untreated, it may cause migration and external, internal resorption of adjacent teeth, loss of arch length, formation of dentigerous cyst or tumors, infection and referred pain as well as malposition of the tooth. Therefore, periodic examination of the development and eruption of the maxillary canine is especially important in a growing child. This case study presents the results of treatment of palatally impacted maxillary canine utilizing surgical exposure and orthodontic tooth movement on patients visiting SNUDH dept. of pediatric dentistry.

• 대한치과보철학회지
• /
• 제29권1호
• /
• pp.167-213
• /
• 1991

The successful replacement of missing teeth has been one driving aim behind the emergence of implant dentistry as both a technology and clinical vocation for over four decades. To date, a multitude of dental implant devices had been designed and utilized in the patient population. Most of these devices have been designed without support of the engineering criteria. The long-term success of any dental implant is dependent upon the optimization of stresses which occurs during oral function and parafunction. Although many studies have examined the biologic interactions between dental implants and living tissue, few studies have been reported on the biomechanical aspects of dental implants. The purpose of this study was to analyze the stress distribution of osseointegrated prosthesis on certain conditions, such as amount of load, location of load, length of fixtures, number of fixtures used, arch shape, bone quality, etc. Three dimentional finite element analysis was used for this study. FEM models were created using commercial software(Super SAP. for IBM 16 bit AT computer. All elements were 8-node brick, isoparametric. Mandible and prosthesis was modeled with 780 elements and 1074 nodes. The results were as follows : 1. In case of cantilever extension, there was a compressive stress at the base of the first implant and a tensile stress at the base of the second implant. 2. The stresses were linearly proportional to the amount of load. 3. The stresses were linearly proportional to the length of cantilever. 4. There was a stress concentration at the neck of the implant and bone under horizontal loads.

• 구강회복응용과학지
• /
• 제30권4호
• /
• pp.265-277
• /
• 2014

목적: 고정식 교정장치에서 removable sliding jig (R-jig)와 temporary anchorage devices (TADs)를 이용하여 상악 구치의 원심 이동 시 힘의 크기와 와이어의 단면 크기에 따른 치아 이동과 치조골에 미치는 효과의 차이를 유한요소방법을 통하여 분석하고자 한다. 연구 재료 및 방법: 정상적인 치아 크기와 악궁 형태를 가진 상악 치아와 상악 치조골을 3차원 형상 모델링하고, 브라켓, 교정용 호선 및 R-jig를 포함한 유한요소 모델을 제작하였다. 골격성 고정원인 mini-implant를 제2소구치와 제1대구치 사이 협측으로 주호선 기준 8 mm 상방 위치시키고, mini-implant를 직접 고정원으로 사용하여 R-jig에 후방력을 부여하였다. 주호선을 $0.019{\times}0.025$ inch SS로 설정하고, R-jig의 와이어 단면 크기를 $0.019{\times}0.025$ inch SS, 후방력의 크기를 200 gm, 결찰을 하지 않는 조건을 기준 조건으로 설정하였다. 그리고 R-jig의 와이어 단면 크기, 후방력의 크기를 다르게 한 조건들을 설정하여 비교하였다. 결과: R-jig의 와이어 단면 크기가 증가함에 따라 후방력에 의한 R-jig의 변형이 적게 관찰되었지만, 제2대구치의 변위량은 아주 미미한 차이를 보였다. 제2대구치에 가해지는 후방력의 크기가 증가할수록 변위량도 같이 증가하였고, 원심경사 경향과 수직 변위량도 더 커졌다. 결론: R-jig는 임상적으로 큰 부작용 없이 치아의 원심이동을 가능하게 한다.

• 대한치과보철학회지
• /
• 제46권2호
• /
• pp.185-192
• /
• 2008

연구목적: 본 연구는 가변형 트레이 개발의 일환으로 그 시제품을 제작하고 비가역성 하이드로콜로이드 인상재를 사용하여 백인과 흑인에 서 인상채득시 트레이의 구강내 적합성를 알아보고자 하였다. 연구재료 및 방법: 가변형 트레이는 한국 성인 악궁의 크기 분석결과를 기본으로 하여 설계하였으며, CAD-CAM 작업을 통하여 견본 모형을 제작한 후 이를 이용하여 실리콘 간이 금형을 만든후 시제품을 제작하였다. 제작된 시제품을 이용하여 국내에 거주하는 백인 60명 (남자 30명, 여자 30명)과 흑인 60명 (남자 30명, 여자 30명)의 인상을 채득한 후 측정부위별로 인상체의 두께와 길이를 측정하여 그 적합도를 평가하였다. 결과: 1. 스탑과 경사면에 의해 트레이의 폭이 적절히 조절되어 균일한 인상체의 두께를 얻을 수 있었다. 2. 백인의 상악 트레이에서는 구개부 중앙이 13.0mm, 구개부 후방이 7.4mm로 비교적 인상체의 두께가 크게 측정되었다. 3. 백인의 하악 트레이에서는 전치 설측 기저부에서 인상체의 길이가 6.7mm로 길게 나타났으며 협측 제1,2 소구치 접촉점에서 폭이 6.7mm로 측정되었다. 설측 후방에서 폭이 2.9mm, 길이는 2.8mm로 조금 작게 측정되었다. 4. 흑인의 상악 트레이에서는 전치 순측 기저부에서 폭이 11.0mm, 구개부 중앙은 12.0mm, 구개부 후방은 11.0mm로 크게 측정되었으며 최후방 변연에서는 제2 대구치에서 후방 변연까지의 거리가 0.8mm로 작게 측정되었다. 5. 흑인의 하악 트레이에서는 전치 순측 기저부에서 폭이 9.2mm, 견치 순면에서 폭이 8.2mm로 비교적 크게 측정되었으며 최후방 변연에서는 제2 대구치에서 후방 변연까지의 거리가 0.3mm로 작게 측정되었다. 결 론: 이상과 같은 연구에 의해 측정된 값을 참고로 트레이의 변연 길이나 폭을 수정하고, 악궁의 해부학적 형태를 반영한다면, 이 가변형 트레이를 사용하여 백인과 흑인에서도 임상에서 보다 쉽고 정확한 인상채득을 할 수 있을 것이다.

• 대한소아치과학회지
• /
• 제26권2호
• /
• pp.275-283
• /
• 1999

저자는 1996년 4월부터 1998년 7월까지 서울대학교병원 소아치과에 내원한 상악정중부 과잉치를 지닌 혼합치열기 및 영구치열기 아동 152명을 대상으로 하여 임상적, 방사선학적 검사를 통해 환아의 연령, 성별과 상악정중부 과잉치의 보유수, 맹출여부, 치관 형태, 위치, 치관 방향과 병발증을 조사하고 상악정중부 과잉치의 양태와 병발증의 상관관계를 chi-square analysis를 이용해 분석하여 다음과 같은 결론을 얻었다. 1. 상악정중부 과잉치로 인한 병발증이 나타나지 않은 경우가 31.6%, 인접 영구전치의 맹출 지연을 야기한 경우가 33.6%, 정중이개가 22.4%, 회전이 8.6%, 전위가 3.3%, 총생이 0.7%이었다. 2. 8.5세 이상 군에 비해 8.5세 미만 군에서 병발증 발생 빈도가 유의성 있게 높았으며(P<0.05), 상악정중부 과잉치가 설측에 위치한 경우에 비해 협측이나 치궁내 위치한 경우에 병발증 발생 빈도가 유의성 있게 높았다(P<0.01). 또 결절형인 경우에 병발증 발생 빈도가 유의성 있게 높았다(P<0.05). 3. 병발증이 나타난 104명을 대상으로 조사한 결과 8.5세 미만 군에서 맹출지연의 빈도가, 8.5세 이상 군인 경우에는 부정교합의 빈도가 유의성 있게 높았고(P<0.05), 상악정중부에 위치하는 경우 부정교합의 빈도가, 편위된 경우에는 맹출지연의 빈도가 유의성 있게 높았다(P<0.01).

• 대한구순구개열학회지
• /
• 제2권1_2호
• /
• pp.5-14
• /
• 1999

The aim of treatment of cleft lip and palate is to correct the cleft and associated problems surgically and thus hide the anomaly so that patients can lead normal lives. This correction involves surgically producing a face that does not attract attention, a vocal apparatus that permits intelligible speech, and a dentition that allows optimal function and esthetics. In neonatal periods, gross distortion of tissues surrounding the cleft requires considerable effort and time due to post operative functional defect and scarring and induces milk feeding problem, malocclusion of deciduous or permanent dentition, congenital missing teeth, skeletal dysplasia. The occurrence of a cleft deformity is a source of considerable shock to the parents of an afflicted baby, and the most appropriate approach is very important things. Thus we tried to analysis of dental arch, shape and size of deformity in cleft patients. The results were obtained as follows. 1. When the cast measurements of UCLP subjects at first visit it was found that the mean length was 9.29mm at the alveolar cleft width, also that was 11.7mm at the anterior width and 14mm at the posterior cleft width. 2. Comparison of UCLP group at first visit and just lip surgery, it was found that the older group showed a insignificant reduction in the width of the cleft in the alveolar, canine, and tuberosity regions. 3. The maxillary casts of the UCLP group at 6 months differ Significantly from those of the at 3 months in both length and width. but there was no statistical difference except anterior ridge length of nonclefted site. 4. Comparison at 6 months and 18 months, there was a greater change in length of the alveolar cleft width, intercanine width, and anterior cleft width. Maxillary arch became wider at both the canine region and intertuberosity region. also posterior anteroposterior length was increased but anterior AP length was decreased from 8.1mm to 7.7mm. There was meaningful increase at intertuberosity length; however, a significant reduction in width t-t'

• 대한치과보철학회지
• /
• 제51권3호
• /
• pp.221-225
• /
• 2013

임시 보철물의 적절한 관리는 보철의 성공에 있어서 중요한 요소이다. 상악 전치 결손부 임시 보철물은 장경간의 결손부가 존재하거나, 타원형의 악궁을 가진 환자에서 자주 탈락하게 된다. 이는 상악 전치부가 구치부에 비해서 수평적인 힘에 더 많이 노출되며, 부가적으로 전방 캔틸레버 효과가 임시 보철물의 유지를 저해하고, 상악 전치부 임시 보철물은 하악의 기능 운동시 적절한 전방 유도를 제공하여야 하기 때문이다. 또한 임시 보철물의 최대 감합위에서 교합접촉은 지점선의 반대편에 위치하게 되어 그 자체로 임시 보철물의 탈락을 야기한다. 본 증례에서는 임시 임플란트를 이용하여 상악 전치부 보철물에 대한 전술한 유해 작용을 피할 수 있었고, 발치 후 치유기간 동안 환자에게 편안함과 만족감을 부여하였으므로 이를 보고하는 바이다.

• 대한두경부종양학회지
• /
• 제21권2호
• /
• pp.190-195
• /
• 2005

Background and Objectives: Fibula is the flap of choice for reconstruction of wide mandible defects after tumor ablation surgery. In mandible reconstruction, restoring the mandible frame to provide mandibular contour and dental arch while restoring masticatory function are important. Even though vascularized fibula can be osteotomized freely, proper design and flap insetting is not easy because of its three dimensional structure and difference in design according to the defect sites. We reviewed patients who underwent mandible reconstruction with fibular flaps according to the defect sites and suggest proper modification methods of fibular flap according to the various defects sites after tumor ablation surgery. Materials and Methods: Twelve consecutive mandible reconstruction with fibular free flaps were performed for defects after tumor ablation surgery. Patients were classified into 4 groups according to the type of mandibular defect(Group 1 : defect on central segment including symphysis, Group 2 : defect on lateral segment(with or without central segment) confined to body, Group 3 : defect on body and ascending ramus that does not include the condyle, Group 4 : defect including the condyle). Results: We suggest different modification methods of fibular free flap for each patient group. Group 1, 3 ; contour by using multiple closing wedge osteotomy. Group 2 ; single or double barrel reconstruction without wedge osteotomy. Group 4 ; contour using single or multiple wedge osteotomy and condylar reconstruction with costochondral graft. Conclusion: Fibular free flaps can be contoured to any desired shape after multiple osteotomies to restore various mandibular defects. It is a reliable and versatile method for reconstruction of mandibular defects after tumor ablation surgery.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제37권4호
• /
• pp.255-263
• /
• 2011

Introduction: Maxillomandibular fixation (MMF) is essential before surgery under general anesthesia in maxillofacial trauma patients. MMF is used basically to reconstruct the occlusion and occlusal stability to recover the facial shape and oral functions. The arch bar and wire is a traditional method for MMF, but it can not only bring pressure to the periodontal ligaments and teeth but also cause a penetrating injury to the surgeons. Materials and Methods: In this study, 198 patients with an open reduction using a manual reduction without MMF from September 2005 to May 2010 in Dankook University Dental Hospital were subjected to a follow-up evaluation during the postoperative 4 months periods. This study evaluated the incidence of complications according to the condition of the patient (gender, age), the state of bony union of the fracture sites and a numeric rating scale evaluation for postoperative pain scoring. Results: 1. The complications were classified into major and minor according to the seriousness, and the major complication rate was as low as 2.02%. Only 2 cases of re-operations (1.01%) were encountered. In the classification according to the fracture line, plate fracture was observed in both cases of mandibular symphysis fracture, and angle fractures and loosening of two screws were noted in the case of mandibular angle fracture. 2. The complication rate was similar regardless of gender and age. 3. The degree of bony union was satisfactory, and the complication rate was reduced as the bony union improved. 4. More patients complained of pain as the operation time was increased. Conclusion: The use of MMF is not always necessary if a skilled assistant is provided to help manually reduce the fracture site. Compared to other studies of mandibular fracture surgery using MMF, the complication rate was similar using only manual reduction and the patients' discomfort was reduced without MMF.

• The Journal of Advanced Prosthodontics
• /
• 제14권5호
• /
• pp.294-304
• /
• 2022

PURPOSE. The purpose of this study was to evaluate the influence of different palatal vault configurations on the accuracy and scan speed of intraoral scans (IO) of completely edentulous arches. MATERIALS AND METHODS. Three different virtual models of a completely edentulous maxillary arch with different palatal vault heights- Cl I moderate (U-shaped), Cl II deep (steep) and Cl III shallow (flat)-were digitally designed using CAD software (Meshmixer; Autodesk, USA) and 3D-printed using SLA-based 3D-printer (XFAB; DWS, Italy) (n = 30; 10 specimens per group). Each model was scanned using intraoral scanner (Trios 3; 3Shape^TM, Denmark). Scanning time was recorded for all samples. Scanning accuracy (trueness and precision) were evaluated using digital subtraction technique using Geomagic Control X v2020 (Geomagic; 3DSystems, USA). One-way analysis of variance (ANOVA) test was used to detect differences in scanning time, trueness and precision among the test groups. Statistical significance was set at α = .05. RESULTS. The scan process could not be completed for Class II group and manufacturer's recommended technique had to be modified. ANOVA revealed no statistically significant difference in trueness and precision values among the test groups (P=.959 and P=.658, respectively). Deep palatal vault (Cl II) showed significantly longer scan time compared to Cl I and III. CONCLUSION. The selection of scan protocol in complex cases such as deep palatal vault is of utmost importance. The modified, adopted longer path scan protocol of deep vault cases resulted in increased scan time when compared to the other two groups.