• Journal of Technologic Dentistry
• /
• v.16 no.1
• /
• pp.57-77
• /
• 1994

The purpose of this study is to investigate the extent to which dental laboratories use proper materials, procedures, devices, and equipments to fabricate crown & bridge, PFM(Porcelain Fused to Metal) crown & bridge, partial denture, complete denture, and other prosteses. 100 laboratories in Seoul were selected for this investigation. Questionnaires were constructed focusing on five topocs:crown & bridge, PFM crown & bridge, partial denture, complete denture, and other prostheses. The results from this survey were as follows : 1. Most dental laboratories used old, inexpensive, and familiar materials rather than newly developed ones. 2. Most of the dental technicians did not stick to the standard procedures of handling materials, but to their own experiences. 3. Newly developed equipments to fabricate dental prostheses were possessed by nearly 30% dental laboratories. 4. About 80% of dental laboratories were using the procedures they had learned in the school : die trimming for accurate crown margin and softening heat treatment after RPD gold casting. But less than 30% of laboratories were shown to follow the boxing procedure to produce master cast and laboratory remounting in the process of complete denture. The findings show that dental laboratory procedures to fabricate dental prostheses are incomplete and inaccurate in some instances. So, further studies are neededs to clarify the causes of some inaccurate procedures, the better and more equipments should be supplied to produce the more accurate dental posthesis, and more efforts at enancing the appropriate use of dental materials and procedures should be made.

• Journal of Dental Anesthesia and Pain Medicine
• /
• v.16 no.2
• /
• pp.89-94
• /
• 2016

Anxiety and phobia in dental procedures are common deterrents for patients visiting the dental care unit. For these individuals, procedural sedation may aid in completion of dental treatments. In most cases, the patients are conscious during sedation, thereby allowing spontaneous ventilation. Intravenous sedation (IVS) is widely used during dental treatment to relieve patient anxiety. IVS is the most effective route of administration to achieve this goal, but it requires advanced training, more than that provided during undergraduate education. During IVS, rapid onset, repetitive drug administration, easy titration, and rapid recovery from sedation can be achieved. However, conscious sedation during IVS can result in deep sedation that can cause respiratory and cardiovascular depression. Therefore, the characteristics of intravenous sedatives should be known. The purpose of this review is to discuss the characteristics and usage of intravenous sedatives currently used for dental procedures.

• Journal of Dental Anesthesia and Pain Medicine
• /
• v.19 no.3
• /
• pp.151-158
• /
• 2019

Background: This study aimed to examine whether the combination of low-dose ketamine and propofol in deep sedation is clinically useful in controlling the behavior in intellectually disabled patients who are typically extremely noncooperative during dental procedures. Methods: A total of 107 extremely noncooperative intellectually disabled adult patients were analyzed. In all patients, deep sedation was performed using either propofol alone (group P) or using a combination of propofol and 0.2 mg/kg or 0.4 mg/kg ketamine (groups PK0.2 and PK0.4, respectively). The procedures were performed in the order of insertion of nasal cannula into the nostril, attachment of mouth gag, and mouth cleaning and scaling. The frequency of patient movement during the procedures, mean arterial pressure, heart rate, peripheral oxygen saturation, recovery time, discharge time, and postoperative nausea and vomiting were examined. Results: The three groups were significantly different only in the frequency of patient movement upon stimulation during single intravenous injection of propofol and scaling. Conclusion: For propofol deep sedation, in contrast to intravenous injection of propofol alone, prior intravenous injection of low-dose ketamine (0.4 mg/kg) is clinically useful because it neither affects recovery, nor causes side effects and can suppress patient movement and vascular pain during procedures.

• Journal of Dental Anesthesia and Pain Medicine
• /
• v.18 no.2
• /
• pp.79-88
• /
• 2018

Managing pain and anxiety in patients has always been an essential part of dentistry. To prevent pain, dentists administer local anaesthesia (LA) via a needle injection. Unfortunately, anxiety and fear that arise prior to and/or during injection remains a barrier for many children and adults from receiving dental treatment. There is a constant search for techniques to alleviate the invasive and painful nature of the needle injection. In recent years, researchers have developed alternative methods which enable dental anaesthesia to be less invasive and more patient-friendly. The aim of this review is to highlight the procedures and devices available which may replace the conventional needle-administered local anaesthesia. The most known alternative methods in providing anaesthesia in dentistry are: topical anaesthesia, electronic dental anaesthesia, jet-injectors, iontophoresis, and computerized control local anaesthesia delivery systems. Even though these procedures are well accepted by patients to date, it is the authors' opinion that the effectiveness practicality of such techniques in general dentistry is not without limitations.

• Restorative Dentistry and Endodontics
• /
• v.38 no.3
• /
• pp.105-112
• /
• 2013

While it is reasonably well known that certain dental procedures increase the temperature of the tooth's surface, of greater interest is their potential damaging effect on the pulp and tooth-supporting tissues. Previous studies have investigated the responses of the pulp, periodontal ligament, and alveolar bone to thermal irritation and the temperature at which thermal damage is initiated. There are also many in vitro studies that have measured the temperature increase of the pulp and tooth-supporting tissues during restorative and endodontic procedures. This review article provides an overview of studies measuring temperature increases in tooth structures during several restorative and endodontic procedures, and proposes clinical guidelines for reducing potential thermal hazards to the pulp and supporting tissues.

• Journal of Oral Medicine and Pain
• /
• v.19 no.2
• /
• pp.137-151
• /
• 1994

In order to evaluate objectively the anxiety level in dental treatment, the author used Biotrainer(BF-120R), one of the skin temperature biofeedback apparatus, to examine 68 dental outpatients on their digital skin temperature change due to routine consecutive dental procedures(oral examination, anesthetic injection, cavity preparation, fissure sealing, polishing). The subjective anxiety level change was also evaluated by visual analog scale. The obtained results were as follows : 1. The skin temperature decreased through consecutive procedures and the temperature in each procedure decreased until 60sec, and then increased on 120sec. 2. The temperature changes in Preparation and Injection were greater than those in other procedures. 3. Generally, male exhibited more change of skin temperature in all procedures than female. 4. Type II, continuously decreasing after procedure, occupied the most in all patients and yhad the lowest beseline temperature. 5. The anxiety level of before-procedure was higher than that of after-procedure and the levels in Injection and Preparation were higher than in other procedures.

• Journal of The Korean Dental Society of Anesthesiology
• /
• v.12 no.3
• /
• pp.183-191
• /
• 2012

In most persons with disabilities had poor oral hygiene because of less attention and ability to perform a dental care. So the increased prevalence and severity of dental disease were common oral state. Although most persons with disabilities need a adequate dental treatment, it is often very difficult to treat because of noncooperativity and involuntary muscle movements. Dental treatments under sedation and general anesthesia were make to provide a high-quality dental service because of decreased anxiety and fear associated dental treatment in persons with disabilities. The dental professionals must be able to select and apply the proper sedation methods in agreement with the characteristics of the disabilities, general conditions, sedation experience and capacity of dentist, type and time of dental treatment, equipments of dental clinic, consent of patient's protector. The proshodontic treatment procedures, such as abutment preparation, dental impression taking process, try-in process of prosthesis and adjustment of occlusion, are difficult even for patients without disabilities. Those procedures are more difficult to patients with disability because it's too hard to control breathing and muscle. In this report, we performed prosthetic dentistry procedures to three patients with disabilities under dental sedation and general anesthesia.

• The Journal of the Korean dental association
• /
• v.51 no.7
• /
• pp.398-404
• /
• 2013

Apprehension and phobia regarding dental procedures are represent the most common deterrents in patients seeking dental care and very common. For these individuals, and others who cannot cooperate during care, procedural sedation may permit completion of intraoral procedures. In most cases, the level of sedation may be kept at minimal to moderate levels permitting patient maintenance of their airway patency and ventilation. Unlike many medical procedures, the majority of dental procedures, no matter the depth of sedation, are performed in the presence of complete analgesia provided by local anesthesia. Therefore, the goal of procedural sedation is to primarily suppress patient fear and apprehension and gain cooperation. Any issues regarding actual pain are usually limited to that produced by the local anesthetic injections or, rarely, the extent of the procedure. For the extremely phobic patient, however, allaying apprehension may be very challenging. Intravenous titration of sedative drugs is the most effective route of administration to achieve this goal but requires advanced training beyond that provided in undergraduate training.

• Journal of Korean society of Dental Hygiene
• /
• v.18 no.1
• /
• pp.77-92
• /
• 2018

Objectives: The purpose of this study was to review depression and anxiety associated with pain during scaling procedures, and to establish measures for reducing scaling pain encompassing not only physical factors but also psychological aspects of patients. This study also attempts to reduce anxiety through proper patient education prior to scaling procedures. Methods: In Seoul, and Gyeonggi area from July 26, 2017 to August 19, 2017, there were 327 copies of questionnaire data collected, excluding 23 questionnaires with insufficient information such as missing entries. The following inductions were made based on data collected. Results: There are positive correlations between pain and depression, dental anxiety, trait anxiety, and state anxiety. Especially, stronger correlation is present between pain and dental anxiety. Depression (${\beta}=0.439$, p<0.001) is the most influential factor associated with pain. Next is dental anxiety (${\beta}=0.292$, p<0.001). Higher the depression and dental anxiety tend to increase pain over scaling procedure. This model is with adjusted explanatory power of 28.2%. Conclusions: The result demonstrates that there is a correlation between scaling pain and depression, dental anxiety, trait anxiety, and state anxiety. Especially, depression and dental anxiety were prominent factors in affecting scaling pain. Therefore, considering aforementioned-findings, a dental hygienist's positive attitude may help in reducing the pain of the patient during scaling procedures, by affecting the psychological state of the patient and reduce the anxiety through proper education prior to scaling procedures.

• The Journal of the Korean dental association
• /
• v.49 no.11
• /
• pp.670-678
• /
• 2011

Various sorts of dental devices for the dental treatment have been introduced and adopted during past several years. Dental Laser, among all devices, seems to be possible for applying to over the whole treatments and widely employed. Furthermore, this article is to introduce that Dental Laser is intended to care patients secured with the effectual treatment against Conventional procedures based upon its studies. The advantages of Dental Laser treatment-along with LLLT (Low Level Laser Therapy) effect, biostimulation effect, and minimal invasive technique - make the patients reduce their fear of the operation, lighten the inconvenience of post operation, and shorten the treatment period. In particular, it is worth considering that the use of laser-assisted therapies is associated with a marked reduction in the use of analgesics and anti-inflammatory medications compared with conventional procedures. This article is to state advantages and differences of Dental Laser treatment compared with Conventional procedures, and to emphasize to become well-acquainted with the precautions for safety and effective Dental Laser treatment. In case of operating Dental Laser with lack of the instructions, it will cause the unpredicted fatal results; therefore this treatment requires special care in its operation. Henceforward, it is anticipated that infinite treatment protocols will be introduced by applying Dental Laser, and this is to address the utilization of Dental Laser.