• 대한치과기공학회지
• /
• 제42권4호
• /
• pp.313-320
• /
• 2020

Purpose: The purpose of this study is to compare and analyze the accuracy of single crowns based on the type of occlusal surface. Methods: A single crown wax pattern was fabricated in three types of occlusal surface. The prepared wax pattern was replicated with silicone, and stone was injected to create a stone model. The prepared specimens were scanned using a model scanner. Scans were classified into three groups, and each scan was performed six times to analyze the trueness and precision of a single crown. In addition, only the occlusal surface area was analyzed for trueness and precision. Data were analyzed using the Kruskal-Wallis H test, a nonparametric test (α=0.05). Results: With regard to the trueness value of the occlusal scan area, the no occlusal tooth attrition (NA) group showed the largest error of 3.5 ㎛, and the complete occlusal tooth attrition (CA) group showed the lowest value of 3.1 ㎛. The NA group had the greatest precision, and the medium occlusal tooth attrition (MA) group and CA group showed a low precision value of 3.2 ㎛; the difference between the groups was statistically significant (α=0.05). In the color difference map, the CA group showed a lower error than the NA group. Conclusion: The occlusal surface with severe attrition had excellent accuracy, but the accuracy of the group without attrition was low. There were significant differences between groups, but clinically acceptable values were shown.

• International Journal of Oral Biology
• /
• 제42권4호
• /
• pp.175-181
• /
• 2017

The aim of this study was to provide a basis for the molecular mechanism underlying the pharmacological action of ethanol. We studied the effects of 1-propanol on the location of n-(9-anthroyloxy)palmitic acid or stearic acid (n-AS) within the phospholipids of synaptosomal plasma membrane vesicles (SPMV). The SPMV were isolated from the bovine cerebral cortex and liposomes of total lipids (SPMVTL) and phospholipids (SPMVPL). 1-Propanol increased the rotational mobility of inner hydrocarbons, while decreasing the mobility of membrane interface, in native and model membranes. The degree of rotational mobility varied with the number of carbon atoms at positions 16, 12, 9, 6 and 2 in the aliphatic chain of phospholipids in the neuronal and model membranes. The sensitivity of increasing or decreasing rotational mobility of hydrocarbon interior or surface by 1-propanol varied with the neuronal and model membranes in the following order: SPMV, SPMVPL and SPMVTL.

• 치위생과학회지
• /
• 제18권1호
• /
• pp.32-41
• /
• 2018

This study investigated the relationship between the organizational culture, organizational support, organizational health, personal health, and quality of work life of dental hygienists and analyzed the factors affecting the quality of work life in order to identify ways to improve their quality of work life. A total of 320 dental hygienists completed a self-administered survey; after excluding data from 21 respondents, 299 responses were included in the analysis. Frequency analyses, t-tests, one-way analysis of variation (ANOVA), and correlation analyses were conducted. A path analysis was also conducted to confirm the causal relationships. The findings are as follows. First, there was a significant difference in several general characteristics of the organizational culture including years in the current job and the number of dental hygienists; organizational support including age and the number of dental hygienists; organizational health including years in the current job and annual salary; and personal health including annual salary. Second, the quality of work life showed a positive correlation with organizational culture, organizational support, personal health, and organizational health in that order. Third, the results of path analysis revealed that organizational culture had a positive effect on organizational support; organizational support and personal health on organizational health; organizational support on personal health; and organizational support and organizational health on quality of work life. In addition, organizational support and organizational health had a direct effect on the quality of work life, while organizational culture, organizational support, and personal health had an indirect effect. These results indicated existence of a relationship among organizational culture, organizational support, organizational health, personal health, and quality of work life. It is necessary to identify ways to improve the quality of work life of dental hygienists.

• 한국치위생학회지
• /
• 제7권4호
• /
• pp.595-609
• /
• 2007

The purpose of this study was to classify the courses of the dental-hygiene curricula into several categories by field, to incorporate the subjects in the same category into an integrated course, and to suggest how to ensure the successful phase-in application of integrative education according to Ronald M. Harden's 11-stage integrative ladder model. The findings of the study were as follows: 1. When the existing curricula were analyzed, it's found that many credits were provided to the courses in the area of basic dentistry that offered both theory and practice. In particular, the subjects tested by the national examination were offered by every college. In the field of public oral health, the largest number of credits was allocated to theory of oral prophylaxis and practice courses. In clinical area, clinical practice, in the area of dental office management, dental insurance course was given the largest credit. There were 31 to 61 major subjects in the colleges, which indicated that the major subjects were segmented in detail. 2. It seemed necessary to incorporate the subjects in the field of basic dentistry into oral biology, and theory of oral prophylaxis/practice, preventive dentistry/practice, preclinical stage, emergency treatment and introduction to dental hygiene should be integrated in to clinical dental hygiene. The courses in clinical area should be combined into clinical dentistry, and in the field of medical management, dental insurance, hospital management and medical relation law should be incorporated into management of dental clinic. 3. In the 11-stage integrative ladder, the subjects in the same field could perfectly be incorporated as the stages advanced. Each of the subjects was less emphasized, and communication and joint plans among teachers who were respectively in charge of the courses were increasingly considered important. Specifically, there should be a consensus among the teachers in regard to the outline of teaching programs, order of education. objects and objectives of programs and what and how to evaluate.

• 한국콘텐츠학회논문지
• /
• 제14권9호
• /
• pp.350-361
• /
• 2014

본 연구에서는 15세에서 17세의 청소년들을 대상으로 치과치료에 대한 공포감의 일반적인 경향과 관련변인들에 따라 공포감이 어떻게 차이가 나며, 이들 변인들이 치과치료에 대한 공포감에 영향을 미치는 정도와 인과관계를 밝히고자 하였다. DFS, DBS 및 GFS를 포함한 설문도구와 청소년의 특성에 관한 문항들로 구성된 설문지를 이용하였고, SPSS를 이용하여 단변량 분석을 시행한 후 LISREL 8.12를 사용하여 공변량 구조모형을 분석하였다. DFS (0.957), DBS (0.916) 및 GFS (0.910)의 Cronbach 신뢰도 계수가 모두 0.9이상으로 높게 나타났고, 자신의 치아상태가 건강하지 않다고 생각할수록, 최근 구강 내 동통을 경험했을 경우, 치과치료 시 동통을 강하게 느꼈을 경우, 그리고 치료 시 동통을 자주 경험했을 경우와 치과약속을 어긴적이 있을 경우에 그렇지 않은 경우보다 치과치료에 대한 공포감의 수준이 통계적으로 유의하게 높아지는 추세로 나타났다. 구조방정식 모형의 적합도는 양호하게 나타났으며, 치과치료시 동통정도와 동통 횟수, 치과약속을 어긴 횟수, 치과의사에 대한 불신감 그리고 일반적인 공포감이 치과치료와 관련된 공포감에 정(+)의 직접효과가 있었다.

• 한국치위생학회지
• /
• 제20권3호
• /
• pp.269-279
• /
• 2020

Objectives: Previous studies have reported inconsistent findings in the association between dental diagnostic X-ray exposure and thyroid cancer. This study was a meta-analysis of case-control studies evaluating the association between exposure to dental radiation and the thyroid cancer risk. Methods: We searched the PubMed and EMBASE databases to identify studies on dental radiation and thyroid cancer risks that were published up to September 2018. Quality of studies was assessed using the Newcastle-Ottawa scale. A fixed-effects model was used to estimate pooled odds ratios (ORs) and 95% confidence intervals (CIs) using STATA 14.0. Potential publication biases were evaluated using Egger's test and Begg's funnel plot. Results: From the literature search, we included six case-control studies in this meta-analysis. The meta-analysis using the fixed-effects model found that dental X-ray exposure was associated with 2.34 times increased risk for thyroid cancer (OR=2.34, 95% CI=1.79-3.21). There was no heterogeneity in the data (p=0.662, I² =0%). Egger's test showed that there was no publication bias (p=0.532). Conclusions: This meta-analysis confirmed the association of dental X-ray exposure and thyroid cancer risk. The current results underscore the importance of applying safety regulations at dental clinics to protect thyroid glands during dental radiography examinations.

• 대한치과의사협회지
• /
• 제54권1호
• /
• pp.27-38
• /
• 2016

Objectives: This study evaluated the outcomes of continuing professional education in implant dentistry using Kirkpatrick's four-level evaluation model. Material and methods: The study was carried out through a questionnaire distributed to dentists who attended a continuing professional education in implant dentistry, 2008~2012. They were asked to fill out questionnaires at least 6 months after its completion. Results: Mean ages of total 23 dentist was $44.8^{\circ}{\ae}8.2$. Mean period after completion of education was $2.7^{\circ}{\ae}1.2$. Knowledge (level 2) (r=0.71, p<0.01) and behavior (level 3) (r=0.68, p<0.01) was positively correlated with topic and methods of education in reaction (level 1). Behavior was positively correlated with knowledge (r=0.79, p<0.01). Result (level 4) was positively correlated with knowledge (r=0.64, p<0.01) and behavior (r=0.86, p<0.01). Conclusion: Reaction affects on knowledge, behavior and result in order.

• 한국기계가공학회지
• /
• 제17권2호
• /
• pp.47-53
• /
• 2018

Nowadays, additive manufacturing (AM) technology is a promising process to fabricate complex shaped devices applied in medical and dental services. Among the AM processes, a DLP (digital light processing) type 3D printing process has some advantages, such as high precision, relatively low cost, etc. In this work, we propose a simple method to fabricate precise dental models using a DLP 3D printer. After 3D printing, a part is commonly post-cured using secondary UV-curing equipment for complete polymerization. However, some shrinkage occurs during the post-curing process, so we adaptively control the UV-exposure time on each layer for over- or under-curing to change the local shape-size of a part in the DLP process. From the results, the shrinkage amounts in the post-curing process vary due to the UV-dose in 3D printing. We believe that the proposed method can be utilized to fabricate dental models precisely, even with a change of the 3D CAD model.

• 대한치과의사협회지
• /
• 제40권2호통권393호
• /
• pp.107-117
• /
• 2002

• 대한치과의사협회지
• /
• 제42권2호통권417호
• /
• pp.60-67
• /
• 2004