• Journal of Embryo Transfer
• /
• v.25 no.4
• /
• pp.259-262
• /
• 2010

Optimization of the preimplantation mammalian embryo culture condition was widely focused on refining medium composition under the name of chemically defined media. However, recent research revealed that the alteration of physical environment can be a crucial factor to a successful embryo development. In this study, under the same embryo density, a novel culture device named oil-free micro tube culture (MTC) system was evaluated using porcine parthenogenetic embryos. The activated oocytes were placed into the 0.2 ml thin-wall flat cap PCR tube and cultured to the blastocyst stage. As a preliminary step, embryo density and culture medium volume were optimized under a standard drop culture system. The optimal embryo density range for in vitro culture was 0.5 embryos per ${\mu}l$ in $20\;{\mu}l$ drop (20.5%) and 1.0 embryos per ${\mu}l$ in $10\;{\mu}l$ drop (20.6%). Based on these results, we compared drop culture system and 'MTC' system in terms of the developmental rate to the blastocyst stage. In $20\;{\mu}l$ medium volume, the 'MTC' system showed similar blastocyst formation rate when compared with drop culture system (20.2% versus 20.5%, respectively) while the 'MTC' system showed lower blastocyst formation rate than drop culture system in $10\;{\mu}l$ one (12.7% versus 20.0%, respectively). Therefore the $20\;{\mu}l$ MTC system may be an alternative incubation system for short-distance embryo transport without carrying the $CO_2$ incubator and this provides novel embryo culture device to clinical veterinary embryologists.

• Imaging Science in Dentistry
• /
• v.48 no.1
• /
• pp.21-30
• /
• 2018

Purpose: To calculate the effective doses of cone-beam computed tomography (CBCT) using personal computer-based Monte Carlo (PCXMC) software (Radiation and Nuclear Safety Authority, Helsinki, Finland) and to compare the calculated effective doses with those measured using thermoluminescent dosimeters (TLDs) and an anthropomorphic phantom. Materials and Methods: An Alphard VEGA CBCT scanner (Asahi Roentgen Ind. Co., Kyoto, Japan) with multiple fields of view (FOVs) was used for this study. The effective doses of the scout and main projections of CBCT using 1 large and 2 medium FOVs with a height >10 cm were calculated using PCXMC and PCXMCRotation software and then were compared with the doses obtained using TLD-100 LiF and an anthropomorphic adult human male phantom. Furthermore, it was described how to determine the reference points on the Y- and Z-axes in PCXMC, the important dose-determining factors in this software. Results: The effective doses at CBCT for 1 large ($20.0cm{\times}17.9cm$) and 2 medium FOVs ($15.4cm{\times}15.4cm$ and $10.2cm{\times}10.2cm$) calculated by the PCXMC software were 181, 300, and $158{\mu}Sv$, respectively. These values were comparable (16%-18% smaller) to those obtained through TLD measurements in each mode. Conclusion: The use of PCXMC software could be an alternative to the TLD measurement method for effective dose estimation in CBCT with large and medium FOVs.

• Journal of Korean society of Dental Hygiene
• /
• v.4 no.2
• /
• pp.265-276
• /
• 2004

The purpose of this study,was to find out health status, characteristics related to working conditions, occurrence of low back pain and its related factors among dental hygienists working in dental clinics, and, thus, to provide basic information necessary to set up some plans for preventing the occurrence of low back pains and improving working conditions for dental hygienists. The data were collected from 310 dental hygienists working at dental clinics in Pusan and Kyungnam area, including Masan, Changwon, Jinhae and Jinju, with a self-administered questionnaire and were analyzed finally for 295 records with SPSS for Windows(7.52K) program. The results were as follows : Working condition was considered to be fair by 562% of dental hygienists were thought to threaten their health in the dental clinics. About seventy percent of dental hygienists worked over ten hours a day and 72.8% were standing while working over 7 hours, 65% considered working hours too long. Health status was thought be more than average for 82.3% while more than half perceived certain degree of stress frequently. The rate of complaining low back pains among dental hygienists was 87.8% with pains more than medium level for 39.3%. The variables significantly related to the degree of low back pains were height, uncomfortable postures, type of working postures and the height of working table, while some variables including height, hours of working on the feet, the presence of hazardous work environment, uncomfortable postures, the presence of hazardous works, the amount of working hours, type of working postures and work-associated stresses, were significantly related to the number of symptoms for low back pains. Multiple regression analysis showed that occurrence of low back pains was significantly influenced by 5 factors such as subjective status of health, work-related stresses, the degree of perception to work environment, the degree of perception to the amount of working hours and age. In conclusion, it might be necessary to manage working conditions effectively by reducing working hours, making good postures while working and removing stressful conditions in order to reduce risk factors for the occurrence of low back pains among dental hygienists. Therefore good working postures, assignment of appropriate rest time and some programs for early detection, care and education of low back pains should be provided for the dental hygienists.

• Journal of Korean society of Dental Hygiene
• /
• v.22 no.1
• /
• pp.1-9
• /
• 2022

Objectives: This study was conducted to find scaling patients' oral health belief and satisfaction by applying Comprehensive Dental Hygiene Care (CDHC) process. Methods: From July 1 to September 20, 2020, the data about 182 patients who had scaling in dental clinics and hospitals had been collected and analyzed. For data analysis, SPSS Statistics 22.0 was applied to conduct frequency analysis, chi-square, t-test, One way ANOVA and Pearson's correlation analysis. Results: Regarding oral health behavior, in the CDHC group 92.4% used oral care products (p<0.001), and 67.4% regularly visited dental clinics for oral care (p<0.001). Regarding the oral health belief according to general characteristics, in the CDHC group, persons aged '50-65' scored 2.4 (the highest), and were significantly different from those aged '20-29' as the result of post-hoc analysis (p<0.001). Regarding the oral health belief of the CDHC group according to oral health behavior, the scaling cycle '3 months' scored the highest (p<0.05). The patients' satisfaction had high correlations with benefit (p<0.01) and Importance (p<0.05) as the sub factors of the oral health belief of the CDHC group. Conclusions: CDHC positively influenced scaling patients' oral health belief and satisfaction. Therefore, it is necessary to expand CDHC, as the medium to improve oral health belief and satisfaction, to clinical settings.

• Journal of Korean society of Dental Hygiene
• /
• v.6 no.1
• /
• pp.79-91
• /
• 2006

Through the investigation and analysis for awareness about Tooth Bleaching treatment for general adults, to rethink the real ideas of Tooth Bleaching which adults has already had and to find the method for generalized Tooth Bleaching, this study made a survey about General Awareness and Common sense for Tooth Bleaching and Oral Health Knowledge and Generalization Methods for 570adult citizen in Busan from 1th August to 10th September. The obtained results were as follows 1. Tooth Shade self contentment was found low, self-discontent respondents were 73.5% and self-content respondents were 26.5%. 2. Tooth Bleaching recognition was found high, as for the recognition period, between 2 and 5 years is 65.5% and as for the recognition route, 33.9% were through broadcast medium. 3. General knowledge for Tooth Bleaching was found low as 2.34(1.12) of 5 score and it is similar to ages and occupations(pE0.001, pE0.05). 4. Tooth Bleaching treatment method appears Home Bleaching and In-Office bleaching was 73.5% and 26.5% respectively. The other side medical institution chosen for Tooth Bleaching treatment appears dental hospital or dental clinic and Home bleaching was 75.6% and 12.1% respectively. 5. To generalize the Tooth Bleaching Care, recommendations of oral health care team and oral health education and development of information data also need to be performed.

• Journal of Technologic Dentistry
• /
• v.28 no.1
• /
• pp.27-41
• /
• 2006

The physical property and phase transformation in a commercial dental casting high gold alloy was investigated as a function of ageing temperature and time using microvickers hardness tester, X-ray diffraction, optical and electron microscopy and EPMA analyser. 1. With increasing ageing time, the hardness of solution-treated gold alloys increased slowly at the initial stage of ageing treatment at an ageing temperature of $300{\sim}400^{\circ}C$, and it reached a maximum value of hardness at the medium stage. Finally, it decreased gradually during further ageing. The maximum value of hardness at was similar with that of the conventional materials and suitable for using as the crown & bridge. 2. During isothermal ageing at a temperature range of $300{\sim}400^{\circ}C$, three phases consisting of the Au-rich ${\alpha}_1$phase with a face-centered cubic structure, the Pt3Zn ${\alpha}_2$phase with an ordered AuCu3(L12) type(f.c.c.) and the Pt-rich ${\alpha}_3$phase with face-centered cubic structure in solution-treated gold alloys were transformed into different three phases consisting of the ${\alpha}_1$phase, the ${\alpha}_3$phase and the PtZn $\beta$phase with an ordered AuCu I(L10) type. 3. The hardening of gold alloys was attributed to the lattice strains of the matrix resulting from the transformation of the ${\alpha}_2$phase to the $\beta$phase. 4. The softening of gold alloys during over-ageing was attributed to the coarsening of the nodules consisting of the $\beta$phase and ${\alpha}_1$matrix.

• Genomics & Informatics
• /
• v.19 no.1
• /
• pp.5.1-5.11
• /
• 2021

Head and neck squamous cell carcinoma (HNSCC) is the most frequent type of head and neck cancer that usually arises from the mucosal surfaces of several organs including nasal cavity, paranasal sinuses, oral cavity, tongue, pharynx, and larynx. The Wnt signaling pathway is a crucial mechanism for cellular maintenance and development. It regulates cell cycle progression, apoptosis, proliferation, migration, and differentiation. Dysregulation of this pathway correlates with oncogenesis in various tissues including breast, colon, pancreatic as well as head and neck cancers. The present study aims to assess the gene alterations in the Wnt family of genes so as to derive an association with HNSCC. Computational approaches have been utilized for the identification of gene alterations in the Wnt family of genes. Several databases such as cBioportal, STRING, and UALCAN were used for the purpose. The frequency of alteration was high in case of Wnt family member 11 (5%). Gene amplification, deep deletions, missense and truncating mutations were observed in HNSCC patients. There was a marked difference in the gene expression profile of WNT11 between grades as well as normal samples. The survival probability measured using the Kaplan-Meier curve also presented with a significant difference among male and female subjects experiencing a low/medium level expression. The female patients showed less survival probability when compared to the male subjects. This provides the prognostic significance of the WNT11 gene in HNSCC. Taken together, the present study provides clues on the possible association of WNT11 gene alterations with HNSCC, which has to be further validated using experimental approaches.

• International Journal of Oral Biology
• /
• v.33 no.1
• /
• pp.33-43
• /
• 2008

In the process of bone remodeling, mineral phase of bone is dissolved by osteoclasts, resulting in elevation of calcium concentration in micro-environment. This study was performed to explore the effect of high extracellular calcium ($Ca{^{2+}}_e$) on mineralized nodule formation and on the expression of progressive ankylosis (Ank), plasma cell membrane glycoprotein-1 (PC-1) and osteopontin by primary cultured mouse calvarial cells. Osteoblastic differentiation and mineralized nodule formation was induced by culture of mouse calvarial cells in osteoblast differentiation medium containing ascorbic acid and ${\beta}$-glycerophosphate. Although Ank, PC-1 and osteopontin are well known inhibitors of mineralization, expression of these genes were induced at the later stage of osteoblast differentiation during when expression of osteocalcin, a late marker gene of osteoblast differentiation, was induced and mineralization was actively progressing. High $Ca{^{2+}}_e$(10 mM) treatment highly enhanced mRNA expression of Ank, PC-1 and osteopontin in the late stage of osteoblast differentiation but not in the early stage. Inhibition of p44/42 MAPK activation but not that of protein kinase C suppressed high $Ca{^{2+}}_{e^-}$induced expression of Ank, PC-1 and osteopontin. When high $Ca{^{2+}}_e$(5 mM or 10 mM) was present in culture medium during when mineral deposition was actively progressing, matrix calcifiation was significantly increased by high $Ca{^{2+}}_e$. This stimulatory effect was abolished by pyrophosphate (5 mM) or levamisole (0.1-0.5 mM), an alkaline phosphatase inhibitor. In addition, probenecid (2mM), an inhibitor of Ank, suppressed matrix calcification in both control and high $Ca{^{2+}}_{e^-}$treated group, suggesting the possible role of Ank in matrix calcification by osteoblasts. Taken together, these results showed that high $Ca{^{2+}}_e$ stimulates expression of Ank, PC-1 and osteopontin as well as matrix calcification in late differentiation stage of osteoblasts and that p44/42 MAPK activation is involved in high $Ca{^{2+}}_{e^-}$induced expression of Ank, PC-1 and osteopontin.

• Imaging Science in Dentistry
• /
• v.30 no.4
• /
• pp.275-279
• /
• 2000

Purpose: Radiation damage is produced and viable cell number is reduced. We need to know the type of cell death by the ionizing radiation and the amount and duration of cell cycle arrest. In this study, we want to identified the main cause of the cellular damage in the oral cancer cells and normal keratinocytes with clinically useful radiation dosage. Materials and Methods: Human gingival tissue specimens obtained from healthy volunteers were used for primary culture of the normal human oral keratinocytes (NHOK). Primary NHOK were prepared from separated epithelial tissue and maintained in keratinocyte growth medium containing 0.15 mM calcium and a supplementary growth factor bullet kit. Fadu and Hep-2 cell lines were obtained from KCLB. Cells were irradiated in a /sup 137/Cs γ-irradiator at the dose of 10 Gy. The dose rate was 5.38 Gy/min. The necrotic cell death was examined with Lactate Dehydrogenase (LDH) activity in the culture medium. Every 4 day after irradiation, LDH activities were read and compared control group. Cell cycle phase distribution and preG1-incidence after radiation were analyzed by flow cytometry using Propidium Iodine staining. Cell cycle analysis were carried out with a FAC Star plus flowcytometry (FACS, Becton Dickinson, USA) and DNA histograms were processed with CELLFIT software (Becton Dickinson, USA). Results: LDH activity increased in all of the experimental cells by the times. This pattern could be seen in the non-irradiated cells, and there was no difference between the non-irradiated cells and irradiated cells. We detected an induction of apoptosis after irradiation with a single dose of 10 Gy. The maximal rate of apoptosis ranged from 4.0% to 8.0% 4 days after irradiation. In all experimental cells, we detected G2/M arrest after irradiation with a single dose of 10 Gy. Yet there were differences in the number of G2/M arrested cells. The maximal rate of the G2/M ranges from 60.0% to 80.0% 24h after irradiation. There is no significant changes on the rate of the G0/G1 phase. Conclusion: Radiation sensitivity was not related with necrosis but cell cycle arrest and apoptosis. These data suggested that more arrested cell is correlated with more apoptosis.

• Journal of Dental Anesthesia and Pain Medicine
• /
• v.18 no.1
• /
• pp.9-17
• /
• 2018

Background: The structure and function of bone tissue is maintained through a constant remodeling process, which is maintained by the balance between osteoblasts and osteoclasts. The failure of bone remodeling can lead to pathological conditions of bone structure and function. Remifentanil is currently used as a narcotic analgesic agent in general anesthesia and sedation. However, the effect of remifentanil on osteoclasts has not been studied. Therefore, we investigated the effect of remifentanil on pre-osteoclast (pre-OCs) differentiation and the mechanism of osteoclast differentiation in the absence of specific stimulus. Methods: Pre-OCs were obtained by culturing bone marrow-derived macrophages (BMMs) in osteoclastogenic medium for 2 days and then treated with various concentration of remifentanil. The mRNA expression of NFATc1 and c-fos was examined by using real-time PCR. We also examined the effect of remifentanil on the osteoclast-specific genes TRAP, cathepsin K, calcitonin receptor, and DC-STAMP. Finally, we examined the influence of remifentanil on the migration of pre-OCs by using the Boyden chamber assay. Results: Remifentanil increased pre-OC differentiation and osteoclast size, but did not affect the mRNA expression of NFATc1 and c-fos or significantly affect the expression of TRAP, cathepsin K, calcitonin receptor, and DC-STAMP. However, remifentanil increased the migration of pre-OCs. Conclusions: This study suggested that remifentanil promotes the differentiation of pre-OCs and induces maturation, such as increasing osteoclast size. In addition, the increase in osteoclast size was mediated by the enhancement of pre-OC migration and cell fusion.