• 한국치위생학회지
• /
• 제15권5호
• /
• pp.841-847
• /
• 2015

Objectives: The purpose of the study was to investigate the satisfaction with instruction medium according to learner attitude and lecture mode in the dental hygiene students. Methods: A web-based self-reported questionnaire was complected by 155 dental hygiene students in Cheonan from May 26 to June 5, 2015. The questionnaire consisted of general characteristics of the subjects, school adaptation, interest to learn, effort to learn, faculty centered lecture, learner centered lecture, self-directed learning, motivation to learn, characteristics of each subject, and satisfaction with lecture mode. The study was approved by institutional review board (IRB) by Baekseok University. Chi-square test and multivariate logistic regression were used to evaluate the satisfaction to medium of instruction according to explanation factors. Results: The lecture mode, opportunity and motivation to learn, interest to learn and effort to learn were the significant factors to satisfaction with instruction medium. In multivariate logistic regression model, the adjusted odds ratio was 6.28 for the opportunity to learn and 4.87 for the interesting to learn. Conclusions: The satisfaction with instruction medium is the most important factor that decides the lecture mode and learner attitude including opportunity to learn and concern to learn.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2004년도 춘계종합학술대회
• /
• pp.327-329
• /
• 2004

치아 매질내에서 전파되는 광신호 해석을 위한 몬테 카를로 수치해석을 National Instrument사의 LabVIEW를 이용하여 개발하였다. 수치해석 결과 치아 조직 내 깊이에 대해 서로 다른 전파 특성을 갖는 두가지 신호를 얻었으며, 검출 신호는 약 60$\mu\textrm{m}$ 이상의 깊이에서 잡음 신호가 특성 신호에 비해 커짐으로 검출이 어려워짐을 알 수 있었다.

• 복식문화연구
• /
• 제14권1호
• /
• pp.93-107
• /
• 2006

This study was designed from the concept that there is a need to establish the uniform for new emerging jobs in modern society. The purpose of the study was to examine dental hygienists'wearing condition, satisfaction, and design evaluation as to provide information for the development of dental hygienists' uniform. Three hundred fifteen dental hygienists completed questionnaires, and data were analyzed by descriptive statistics, factor analysis, multiple regression, ANOVA, and Duncan's test. The findings from the study were following. First, majority of dental hygienists currently wear shirts and pants two-piece uniform in white with no print. Second, dental hygienists' overall satisfaction level for their uniform was medium, and symbolic satisfaction as well as functional satisfaction did not reach the medium level while aesthetic satisfaction was above medium. The satisfaction levels were significant different between groups according to the education, clinic size, and work experience. Third, aesthetic satisfaction levels influenced on the job image as professional. Finally, designs consisting of two-piece style with shirts and pants and having Peter pan collar were recorded high evaluation. The findings can be implemented into dental hygienists' uniform design.

• 한국치위생학회지
• /
• 제8권3호
• /
• pp.139-148
• /
• 2008

A fluorine solution was used to measure the growth of S.mutans and the pH changes were also measured in order to find an effective and preventative dentistry lab within a limited time for the dental hygiene department curriculum and the following results were obtained. 1. In the growth comparison of S.mutans, the culture medium of the experiment group with fluorine weighed 0.3g and the culture medium with no fluorine weighed 0.5g, which shows that the growth rate of S.mutans is significantly decreased in the culture medium with the fluorine. 2. The pH7.8 of the culture medium was not nearly changed; it became 7.0 after culturing with fluoride, however the pH was significantly decreased to 3 in the culture medium that had no fluorine. 3. Since it has been proven that the fluorine can control the growth of germs, it is believed that the effect of fluorine as a cavity preventative should be emphasized to students and in addition, it will help students transmit the effect of fluoride to their patients since this knowledge has been acquired through practice. 4. It is considered that this is a simple test protocol providing effective results in the microorganism and preventive dentistry lab within a limited time and furthermore, it will furnish the students of dental hygiene with comprehensive accessibility to dental hygiene curriculum.

• International Journal of Oral Biology
• /
• 제39권1호
• /
• pp.35-40
• /
• 2014

Halitosis is caused by consumption of certain foods or drinks and production of volatile sulfur compounds (VSCs) by periodontopathogens. VSCs-related halitosis is not easily removed using mechanical or chemical therapies such as dental floss, plaque control and mouth rinse. Lactobacillus are known to be probiotics and stimulate immune systems of human. Furthermore, L. casei ATCC 334 and L. rhamnosus GG have an effect on protection of dental caries in vitro studies. The aim of this study was to investigate effect of Lactobacillus on halitosis by Fusobacterium nucleatum- and Porphyromonas gingivalis-producing VSCs and to analyze inhibitory mechanism. The periodontopathogens were cultivated in the presence or the absence Lactobacillus, and the level of VSCs was measured by gas chromatograph. For analysis of inhibitory mechanisms, the susceptibility assay of the spent culture medium of Lactobacillus against F. nucleatum and P. gingivalis was investigated. Also, the spent culture medium of Lactobacillus and periodontopathogens were mixed, and the emission of VSCs from the spent culture medium was measured by gas chromatograph. L. casei and L. rhamnosus significantly reduced production of VSCs. L. casei and L. rhamnosus exhibited strong antibacterial activity against F. nucleatum and P. gingivalis. The spent culture medium of L. casei inhibited to emit gaseous hydrogen sulfide, methyl mercaptan and dimethyl sulfide from the spent culture medium of periodontopathogens. However, the spent medium of L. rhamnosus repressed only dimethyl sulfide. L. casei ATCC 334 may improve halitosis by growth inhibition of periodontopathogens and reduction of VSCs emission.

• 대한치과기공학회지
• /
• 제31권3호
• /
• pp.21-26
• /
• 2009

Purpose: Standards of alloy for porcelain fused to metal crown be classified by metallic factor and biological factor. Metallic factors consist of stability of alloy composition and mechanical strength and surface characteristics for chemical bond. Biological factors be considered properties of metallic elements and problems originated by toxicity and hypersensitive reaction. Alloys considered such controversial points are the most suitable alloy for dental instrument. Method: Alloys added Be and Nb using Ni-Cr alloy which has been widely used for dental instrument be selected and classified experimental group. Non-addition Be and Nb to Ni-Cr alloy classify control group and addition Be alloy is Be-experimental group, addition Nb alloy is Nb-experimental group. Specimens for cytotoxicity analysis gave effect to washing and sterilization. and then made an experiment on elution with cell medium after disinfection. It conducted specimens within cell medium with 24hours, 48hours, 72hours, respectively. It cultured human dermal fibroblast(HDF) using cell medium for cytotoxicity test and then investigated elution rate through spectroscopic analysis by MTT-assay. Result: As results of cytotoxicity test by MTT-assay, cultured cell rate of VII measured more low numerical value within elution medium for 24hours focused on control group. Also, cultured cell rate of K3 alloys observed low value for 48hours, 72hours than value of control group. Conclusion: According to final result that synthesize above results, Ni-Cr alloy added Be and Ni has little difference in Cytotoxicity by MTT-assay.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2004년도 춘계종합학술대회
• /
• pp.321-323
• /
• 2004

치아 조직안에서의 OCT 신호의 검출 및 최적화를 위해 몬테카를로 수치해석 프로그램을 개발하였다. 수치해석 결과에 의해 치아 조직 내에서의 깊이에 따라 서로 다른 전파 특성을 갖는 두가지 신호를 얻었다. 검출 신호는 약 60w 이상의 깊이에서 잡음 신호가 특성 신호에 비해 커짐으로 검출이 어려웠으나, 검출 영역 및 각도의 제한에 의해 5000n이상으로 검출 깊이가 증가함을 알수 있었다.

• Journal of Korean Dental Science
• /
• 제4권2호
• /
• pp.52-58
• /
• 2011

Purpose: Modifications of implant design have been related to improving initial stability. The purpose of this study was to investigate their respective effect on initial stability between two tapered implant systems (self-tapping vs. non-self-tapping) in medium density bone using three different analytic methods. Materials and Methods: Self-tapping implant (GS III$^{(R)}$; Osstem Implant Co., Busan, Korea) and non-self-tapping implant (Replace Select$^{(R)}$; Nobel Biocare, G$\H{o}$teborg, Sweden) were investigated. In Solid rigid polyurethane blocks of artificially simulated Quality 2 bone, each of the 5 implants was inserted according to the manufacturer's instructions for medium-bone drilling protocol. Evaluation of initial stability was carried out by recording the maximum insertion torque (IT) and performing the resonance frequency analysis (RFA), and the pull-out test. Results: The IT and RFA values of self-tapping implant were significantly higher than those of non self-tapping implant (P=.009 and P=.047, respectively). In the pull-out values, no significant differences were found in implants between two groups (P=.117). Within each implant system, no statistically significant correlation was found among three different outcome variables. Conclusions: These findings suggest that design characteristics of implant geometry significantly influence the initial stability in medium bone density.

• 한국수정란이식학회지
• /
• 제23권4호
• /
• pp.245-250
• /
• 2008

This study was designed to investigate the effect of essential amino acids (EAA) and/or non-essential amino acids (NEAA) on the development of parthenogenetic and somatic cell nuclear transfer (SCNT) porcine embryos in vitro. To evaluate the timing of amino acids supplementation, activated oocytes were cultured in NCSU23-PVA with EAA, NEAA or NEAA+EAA (AAs) during specific periods as below: EAA, NEAA or AAs were supplemented during Day 0 to 6 (whole culture period: ALL), Day 2 to Day 6 (post-maternal embryonic transition period: POST-MET), Day 5 to Day 6 (post-compaction period: POST-CMP), Day 0 to Day 2 (pre-maternal embryonic transition period: PRE-MET), or Day 0 to Day 4 (post-compaction period: PRE-CMP). Supplementation of NEAA decreased cleavage rates in PRE-MET and PRE-CMP and also decreased blastocyst rates in POST-CMP. On the other hand, EAA significantly enhanced blastocyst formation rate in POST-MET and no detrimental effect on embryonic development in other groups. Interestingly, NEAA and EAA had synergistic effect when they were supplemented to the medium during whole culture period. Supplementation of AAs also enhanced SCNT porcine embryo development whereas BSA-free medium without AAs could not supported blastocyst formation of SCNT embryos. In conclusion, existence of EAA and NEAA in defined culture medium variously influences the development of parthenogenetic and SCNT porcine embryos, and their positive effect are only occurred when both EAA and NEAA are supplemented to the medium during whole culture period. Additionally, AAs supplementation enhances the blastocyst formation of SCNT porcine embryos when they are cultured in the defined condition.

• The Journal of Advanced Prosthodontics
• /
• 제13권4호
• /
• pp.205-215
• /
• 2021

PURPOSE. The purpose of this study was to compare the accuracy of three intraoral scanner (IOS) systems with three different dental arch widths. MATERIALS AND METHODS. Three dental models with different intermolar widths (small, medium, and large) were attached to metal bars of different lengths (30, 40, and 50 mm). The bars were measured with a coordinate measuring machine and used as references. Three IOSs were compared: TRIOS 3 (TRI), True Definition (TD), and Dental Wings (DW). The relative length and angular deviation of both ends of the metal bars from the scan data set (n = 15) were calculated and analyzed. RESULTS. Comparing among scanners in terms of trueness, the relative length deviation of DW in the small (1.28%) and medium (1.08%) arches were significantly higher than TRI (0.46% and 0.48%) and TD (0.33% and 0.18%). The angular deviation of DW in the small (1.75°) and medium (1.83°) arches were also significantly greater than TRI (0.63° and 0.40°) and TD (0.55° and 0.89°). Comparing within scanner, the large arch of DW showed better accuracy than other arch sizes (P < .05). On the other hand, the larger arch of TD presented a greater tendency of angular deviation in terms of trueness. No significant differences were found in terms of trueness between the arch widths of TRI group. CONCLUSION. The different widths of the dental arches can affect the accuracy of some intraoral scanners in full arch scan.