• The korean journal of orthodontics
• /
• v.36 no.5
• /
• pp.388-396
• /
• 2006

Treatment of skeletal Class III malocclusion with mini-implant anchorage is discussed in relation to vertical control of the maxillary posterior dentoalveolar region and horizontal control of mandibular anterior teeth. A midpalatal mini-implant provided anchorage for intruding the maxillary posterior teeth. Mandibular mini-Implant implants were used to bring about labioversion of mandibular anterior teeth. After mandibular setback surgery, improvement of the facial profile was obtained both horizontally and vertically, Total treatment time was 11 months. Stable occlusion was maintained after 18 months of retention, The effectiveness and efficacy of mini-implants for the treatment of skeletal Class III malocclusion are also discussed.

• Journal of Periodontal and Implant Science
• /
• v.40 no.3
• /
• pp.139-143
• /
• 2010

Purpose: Pink gingival esthetic especially on the anterior teeth has been an important success criterion in implant-supported restoration. Inter-implant papillae are a critical factor for implant esthetics, and various techniques for inter-implant papilla reconstruction have been introduced. The aim of this study is to suggest and evaluate a surgical technique for reconstructing inter-implant papillae. Methods: A 28-year-old man had an implant placed on the #13 and #14 area. Four months after implant placement, a second stage surgery was planned for inter-implant papilla reconstruction. At the time of the abutment connection, I-type incisions were performed on the #13i & #14i area followed by full-thickness flap elevation and connection of a healing abutment on underlying fixtures without suture. Results: Two weeks after the second stage implant surgery, soft tissue augmentation between the two implants was achieved. Conclusions: I-shaped incisions for papilla reconstruction performed during the second stage implant surgery were useful for inter-implant papilla reconstruction and showed a good esthetic result.

• Journal of Periodontal and Implant Science
• /
• v.51 no.6
• /
• pp.433-443
• /
• 2021

Purpose: This study aimed to evaluate the effectiveness of the partial split-flap technique with a K-incision on vertical guided bone regeneration (vGBR) and to retrospectively analyze the clinical and radiographic outcomes of dental implantation using this approach. Methods: In total, 78 patients who received 104 dental implants with vGBR, categorized as (1) pre-GBR and post-implantation and (2) simultaneous GBR and implantation, were enrolled. Data analysis was based on periapical radiographs, clinical photos, and dental records. The 2-sample t-test was used to compare the 2 surgical procedures. Results: The baseline vertical bone level, augmented bone height (ABH), and treatment duration were significantly higher in the pre-GBR procedure group. The survival rates of the implants were 96.1% and 94.8% in implant- and patient-based analyses, respectively. In Cox regression analysis, high rates of implant failure were found in the presence of ABH of ≥4 mm, smoking, and diabetes. Conclusions: Within the limitations of this retrospective study, the partial split-flap technique using a K-incision for vGBR showed stable clinical outcomes and favorable dental implant survival.

• The Journal of Advanced Prosthodontics
• /
• v.6 no.5
• /
• pp.395-405
• /
• 2014

PURPOSE. This study aims to investigate the degree of subjective pain and the satisfaction of patients who have undergone an implant treatment using a computer-guided template. MATERIALS AND METHODS. A survey was conducted for 135 patients who have undergone implant surgery with and without the use of the computerguided template during the period of 2012 and 2013 in university hospitals, dental hospitals and dental clinics that practiced implant surgery using the computer-guided template. Likert scale and VAS score were used in the survey questions, and the independent t-test and One-Way ANOVA were performed (${\alpha}=.05$). RESULTS. The route that the subjects were introduced to the computer-guided implant surgery using a surgical template was mostly advices by dentists, and the most common reason for which they chose to undergo such surgery was that it was accurate and safe. Most of them gave an answer that they were willing to recommend it to others. The patients who have undergone the computer-guided implant surgery felt less pain during the operation and showed higher satisfaction than those who have undergone conventional implant surgery. Among the patients who have undergone computer-guided implant surgery, those who also had prior experience of surgery without a computer-guided template expressed higher satisfaction with the former (P<.05). CONCLUSION. In this study, it could be seen that the patients who have undergone computer-guided implant surgery employing a surgical template felt less pain and had higher satisfaction than those with the conventional one, and the dentist's description could provide the confidence about the safety of surgery.

• The Journal of the Korean dental association
• /
• v.58 no.2
• /
• pp.83-92
• /
• 2020

In the anterior maxillary area, dental implants for tooth replacement are challenging due to the need to satisfy high esthetic level as well as functionality. Immediate implant placement and provisionalization can dramatically reduce the edentulous period, and then fulfill patient's demand for esthetics. The aim of present case report is to demonstrate two cases that successfully restored single tooth with immediate implant placement and provisionalization in the anterior maxillary area. A 47 years old female was scheduled to replace her maxillary right central incisor due to crown-root fracture by trauma. Another 54-year-old female was planned to place dental implant following tooth extraction of maxillary right lateral incisor owing to continuous pus discharge despite repetitive treatments including apicoectomy. In these two cases, surgical and prosthetic procedures progressed in a similar way. After minimal flap elevation, atraumatic tooth extraction was performed. Implant was placed in proper 3-dimensional position and angulation with primary stability. Bone graft or guided bone regeneration for peri-implant bone defect was conducted simultaneously. Provisionalization without occlusal loading was carried out at the same day. Each definitive crown was delivered at 7 and 5 months after the surgery. Two cases have been followed uneventfully for 2 to 5 years of loading time. In conclusion, Immediate implant placement and provisionalization could lead to esthetic outcome for single tooth replacement with dental implant under proper case selection.

• The Journal of Advanced Prosthodontics
• /
• v.13 no.1
• /
• pp.12-23
• /
• 2021

Purpose. The aim of the study was to compare the lingualized implant placement creating a buccal cantilever with prosthetic-driven implant placement exhibiting excessive crown-to-implant ratio. Materials and Methods. Based on patient's CT scan data, two finite element models were created. Both models were composed of the severely resorbed posterior mandible with first premolar and second molar and missing second premolar and first molar, a two-unit prosthesis supported by two implants. The differences were in implants position and crown-to-implant ratio; lingualized implants creating lingually overcontoured prosthesis (Model CP2) and prosthetic-driven implants creating an excessive crown-to-implant ratio (Model PD2). A screw preload of 466.4 N and a buccal occlusal load of 262 N were applied. The contacts between the implant components were set to a frictional contact with a friction coefficient of 0.3. The maximum von Mises stress and strain and maximum equivalent plastic strain were analyzed and compared, as well as volumes of the materials under specified stress and strain ranges. Results. The results revealed that the highest maximum von Mises stress in each model was 1091 MPa for CP2 and 1085 MPa for PD2. In the cortical bone, CP2 showed a lower peak stress and a similar peak strain. Besides, volume calculation confirmed that CP2 presented lower volumes undergoing stress and strain. The stresses in implant components were slightly lower in value in PD2. However, CP2 exhibited a noticeably higher plastic strain. CONCLUSION. Prosthetic-driven implant placement might biomechanically be more advantageous than bone quantity-based implant placement that creates a buccal cantilever.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.36 no.4
• /
• pp.325-330
• /
• 2010

Introduction: Mini-implant system is applicable to areas of narrow space and area requiring temporary loading support. The purpose of this study was to evaluate the clinical outcome of a mini-implant system as well as the application of mini-implant system in the dental clinical field. Materials and Methods: The patients who had been operated from Jan 2007 to Dec 2007 in the four dental facility including Seoul National University Bundang Hospital were enrolled. To evaluate the factors associated with the clinical outcome, the patients were classified according to gender, age, area of surgery, type of implant, diameter and length of the implant, and the purpose of the mini-implant system application. Results: From 147 implants, only three implants failed, one of them was for temporary loading. There were no serious surgical or prosthetic complications in this study. Conclusion: An analysis of the preliminary data revealed a satisfactory clinical outcome. However, more long-term evaluation of narrow ridge type as well as the patient’s satisfaction on the use of a provisional type mini-implant system is needed.

• The Journal of Advanced Prosthodontics
• /
• v.9 no.6
• /
• pp.476-481
• /
• 2017

PURPOSE. Patient-reported outcomes are increasingly commonly used as a method of evaluating treatments. This cross-sectional study aimed to evaluate implant treatment from the perspective of patient-reported outcomes. MATERIALS AND METHODS. Subjects were 804 patients who visited the Department of Oral Implantology at Osaka Dental University. The participants were categorized into a pre-implant group and a post-implant group. They were further categorized into five subgroups based on the number of occlusal supports provided by the remaining teeth according to the Eichner classification. The participants answered a basic questionnaire and the General Oral Health Assessment Index (GOHAI) questionnaire, an oral health-related quality of life (QOL) scale. GOHAI scores were compared according to the number of occlusal supports within each group and between the two groups. RESULTS. The results revealed a significant difference in terms of the number of occlusal supports within the pre-implant group; GOHAI scores decreased as the number of occlusal supports decreased (P<.001). However, no significant difference was observed in GOHAI scores in terms of the number of occlusal supports in the post-implant group (P>.05). GOHAI scores significantly improved in both pre- and post-implant groups in all occlusal support subgroups (P<.001). CONCLUSION. GOHAI scores decrease as occlusal support is lost. However, implant treatment performed in areas of loss improves the GOHAI score when occlusal support is restored.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.29 no.4
• /
• pp.407-417
• /
• 2013

The one of peri-implant soft tissue problems seen during the maintenance phase of implant therapy is an inadequate zone of keratinized tissue. Keratinized tissue plays a major role around teeth and dental implants, helping in maintaining and facilitating oral hygiene. A free gingival graft (FGG) is chosen to correct the soft tissue defects and provide optimal peri-implant health in order to increase the long-term prognosis of the implant reconstruction. However, the patient treated with FGG has pain and discomfort on donor site such as palate. It is also technically demanding, time consuming, and the color match of the tissue is often less than ideal. An apically positioned flap (APF) is selected for increasing the keratinized tissue simply while or after the second stage implant surgery. This case report shows successfully increasing the width of peri-implant kenratinized tissue through APF procedure on small site of dental implant instead of FGG.

• Imaging Science in Dentistry
• /
• v.50 no.4
• /
• pp.281-290
• /
• 2020

Purpose: The objective of the present study was to evaluate the prevalence of dental implants positioning errors and their associations with adjacent structures and anatomical variations by means of cone-beam computed tomography (CBCT). Materials and Methods: CBCT images of 207 patients (584 dental implants) were evaluated by 2 oral radiologists. The distance between the implant and the adjacent teeth/implants was measured and classified as adequate (≥1.5 mm and ≥3 mm, respectively) or inadequate. The presence of thread exposure, cortical perforation, implant dehiscence, implant penetration into adjacent structures, and anatomical variations was also recorded. The incisor canal diameter and the depth of the concavity of the submandibular fossa were measured in order to evaluate their correlations with the frequency of implant penetration in these structures. Descriptive analyses, the Fisher exact test, and Spearman correlation analysis were performed (α=0.05). Results: The overall prevalence of positioning errors was 82.9%. The most common error was the inadequate distance between the implant and the adjacent teeth/implants. The presence of anatomical variations did not significantly influence the overall prevalence of errors (P>0.05). There was a positive correlation between the diameter of the incisor canal and the frequency of implant penetration in this structure (r=0.232, P<0.05). Conclusion: There was a high prevalence of dental implant positioning errors, and positioning errors were not associated with the presence of anatomical variations. Professionals should be aware of the space available for implant placement during the preoperative planning stage.