• Journal of Korean society of Dental Hygiene
• /
• v.22 no.5
• /
• pp.461-468
• /
• 2022

Objectives: To investigate the effect of several elder-friendly foods on oral health and suggest guidelines for proper food intake. Methods: Six elderly-friendly foods (liquid type) and two control groups (mineral water and mixed coffee) were selected for this study. The pH of the food was measured using a calibrated pH meter, and the titratable acidity was determined using 1 M NaOH until 7.0 (TA 7.0). The screening method suggested by the International Organization for Standards was performed using an undersaturated hydroxyapatite solution to determine the difference between the initial and final pH of the screening solution (△pH). In addition, the sugar content was measured and expressed as Brix (%). Results: All the elder-friendly foods tested in this study showed a neutral pH (6.68-7.35), similar to mineral water (pH 7.84). The range of TA 7.0 values was 0.00-0.54 ㎖. The changes in pH determined using the screening solution confirmed that the largest change in pH was found in Careon (△pH 1.14±0.02), which has no erosive potential. Nevertheless, all elder-friendly foods had higher sugar content than the negative control group. Conclusions: Low tooth erosive potential was found in elder-friendly foods, but these foods showed high sugar content.

• Journal of dental hygiene science
• /
• v.24 no.1
• /
• pp.22-28
• /
• 2024

Background: Particulate matter (PM) has been extensively observed due to its negative association with human health. Previous research revealed the possible negative effect of air pollutant exposure on oral health. However, the predictive model between air pollutant exposure and the prevalence of periodontitis has not been observed yet. Therefore, this study aims to propose a predictive model for the number of patients with periodontitis exposed to PM and atmospheric factors in South Korea using deep learning. Methods: This study is a retrospective cohort study utilizing secondary data from the Korean Statistical Information Service and the Health Insurance Review and Assessment database for air pollution and the number of patients with periodontitis, respectively. Data from 2015 to 2022 were collected and consolidated every month, organized by region. Following data matching and management, the deep neural networks (DNN) model was applied, and the mean absolute percentage error (MAPE) value was calculated to ensure the accuracy of the model. Results: As we evaluated the DNN model with MAPE, the multivariate model of air pollution including exposure to PM_2.5, PM₁₀, and other atmospheric factors predict approximately 85% of the number of patients with periodontitis. The MAPE value ranged from 12.85 to 17.10 (mean±standard deviation=14.12±1.30), indicating a commendable level of accuracy. Conclusion: In this study, the predictive model for the number of patients with periodontitis is developed based on air pollution, including exposure to PM_2.5, PM₁₀, and other atmospheric factors. Additionally, various relevant factors are incorporated into the developed predictive model to elucidate specific causal relationships. It is anticipated that future research will lead to the development of a more accurate model for predicting the number of patients with periodontitis.

• Journal of Korean society of Dental Hygiene
• /
• v.13 no.5
• /
• pp.727-737
• /
• 2013

Objectives : This study aimed to investigate the levels of emotional labor and occupational stress and their relationships in dental counselors to improve psychological health related with dental counseling. Methods : The questionnaire survey was conducted to 167 dental counselors working at dental clinics in Busan and Gyeongsangnam-do from June to August, 2012. The study used emotional labor questionnaires and Korean Occupational Job Stress Scale (Basic Version, KOSS-43) as an assessment scale. All respondents were asked to complete a self-administered questionnaire. Data analysis was performed with descriptive analysis, t-test, ANOVA, and multiple regression analysis using SAS(ver 9.2). Results : The levels of occupational stress and emotional labor in dental counselors were $47.26{\pm}8.36$ and $3.45{\pm}0.47$. Three subscales of emotional labor as frequency of emotional expression, attention of emotional expression norms and disharmony of emotion were related with occupational stress in dental counselors. The level of job stress was increased by the lower level of emotional expression and increased by the higher levels of emotional expression and disharmony of emotion. Conclusions : In addition to increasing the number of counselors, nurturing counseling workforce is essential to manage the job stress of dental counselors. Sufficient counseling with a patient in a comfortable counseling environment is important to reduce the job stress by emotional labor. Continuous service improvement through positive emotional service education is necessary to be implemented for counselors.

• Journal of Korean society of Dental Hygiene
• /
• v.19 no.6
• /
• pp.1025-1036
• /
• 2019

Objectives: The purpose of this study is to identify the status and opinions of professional oral health care performance in oral cancer patients. Methods: Seven National University Dental Hospitals and the National Cancer Center in Korea surveyed the medical personnel in charge of oral health care for oral cancer patients. The questionnaire consisted of 16 questions, including the status of expert oral health care education and performance for oral cancer patients, etc. A total of 47 questionnaires were retrieved, and the collected data were used in PASW Statistics 23.0 to perform frequency analysis, cross-analysis, and kruskal Wallis tests. Results: A survey of oral health care education found that 29.8% of the medical personnel had received education. The most performed of professional oral health care was found that applying fluoride by dental hygienist, treating stomatitis by dentist, and wiping mouths with sponge by nurse. The assessment of self-performance has shown that applying fluoride by dental hygienists has a statistically significant difference. Only 37.8% of oral health care education for patients was conducted. Most recognized that oral health care in oral cancer patients was important, but it is difficult to provide care due to lack of performance personnel and time, opportunities for performance personnel to be educated. The improvement was found to require an increase in the number of performance personnel, placement of professionals, and practical training to enhance performance capabilities. Conclusions: For oral health care of oral cancer patients, continuous education for medical personnel, establishment of oral health care manual and medical system, research on oral health care of oral cancer patients and public relations campaign will have to be activated. Development of expert care manual analysis and evaluation tools for oral health care in oral cancer patients in the future and development of standardized curriculum will be necessary.

• Journal of dental hygiene science
• /
• v.19 no.2
• /
• pp.86-95
• /
• 2019

The modern era of microbial genome analysis began in earnest in the 2000s with the generalization of metagenomics and gene sequencing techniques. Studying complex microbial community such as oral cavity and colon by a pure culture is considerably ineffective in terms of cost and time. Therefore, various techniques for genomic analysis have been developed to overcome the limitation of the culture method and to explore microbial communities existing in the natural environment at the gene level. Among these, DNA fingerprinting analysis and microarray chip have been used extensively; however, the most recent method of analysis is metagenomics. The study summarily examined the overview of metagenomics analysis techniques, as well as domestic and foreign studies on disease genomics and cluster analysis related to oral metagenome. The composition of oral bacteria also varies across different individuals, and it would become possible to analyze what change occurs in the human body depending on the activity of bacteria living in the oral cavity and what causality it has with diseases. Identification, isolation, metabolism, and presence of functional genes of microorganisms are being identified for correlation analysis based on oral microbial genome sequencing. For precise diagnosis and treatment of diseases based on microbiome, greater effort is needed for finding not only the causative microorganisms, but also indicators at gene level. Up to now, oral microbial studies have mostly involved metagenomics, but if metatranscriptomic, metaproteomic, and metabolomic approaches can be taken together for assessment of microbial genes and proteins that are expressed under specific conditions, then doing so can be more helpful for gaining comprehensive understanding.

• Journal of dental hygiene science
• /
• v.7 no.3
• /
• pp.161-166
• /
• 2007

Relationship of Dental Health Assessment to the Number of Existing Permanent Tooth in Senior Citizens visited a dental hospital or clinic from Some Regions. The purpose of this study was to examine the relationship of the dental health assessment of elderly people who were at the age of 65 and up to the number of existing permanent tooth in an effort to lay the groundwork for pinpointing problems with their oral status and developing programs geared toward improving their dental health and quality of life. The findings of the study were as follows: 1. Regarding self-perceived dental health, the largest group of the senior citizens that accounted for 57.9 percent didn't find themselves to be in good dental health. The second largest group that represented 32.5 percent thought their dental health was at an ordinary level, and the third greatest number of them that stood at 9.5 percent considered themselves to be in good dental health. Their self-perceived dental health status was statistically significantly different according to education and monthly income, and whether they had a job or not made a statistically significant difference to that as well(p < .01, p < .001). 2. In terms of taste appreciation, 58.7 percent, the largest group, didn't appreciate one or two kinds of taste, and their taste appreciation was statistically significantly different according to education and monthly income(p < .05, p < .01). 3. As for chewing ability, 20.6 percent were able to chew well. In regard to digestion, 69.0 percent had an ordinary level of digestive power. 4. Concerning the number of existing permanent tooth, 38.9 percent, the greatest percentage, had ten or less permanent teeth. By education, the possession of 21or more permanent teeth(40.0%) was most common among those who received high-school or higher education. The greatest group of the senior citizens with a job had 11 to 20 permanent teeth(41.7%), and the largest number of the elderly people whose monthly income was 500 thousand won or more were in possession of 11 to 20 permanent teeth(41.7%). The number of existing permanent tooth statistically significantly differed with their general characteristics(p < .01). 5. As to connections between dental health and the number of existing permanent tooth, 21 permanent teeth or more were owned by those who were in good dental health, who appreciated different tastes and whose chewing ability was good. So there was a statistically significant relationship between the two.

• Journal of Korean society of Dental Hygiene
• /
• v.5 no.2
• /
• pp.279-296
• /
• 2005

The purpose of this study was to examine what types of experiences dental hygienists underwent with patients who were unapproachable in an effort to find out the latter group's needs and expectations, explore how to treat them of different personality type, and provide better dental services in response to their needs. To attain the purpose, Q-methodology was employed, which made a subjective and systematic assessment of human subjectivity. There were three types of subjectivity among dental hygienists in conjunction with their experiences with patients who were hard to please. Each group whose subjectivity was different also had a different preference for patients, which was not exclusive to one another but unique. Type 1 was "avoiding patients who showed off". Dental hygienists of this type found it unpleasant to treat patients who boasted of their background, position or relations with the head of hospital and wanted to be given special treatment. They avoided those patients, since giving special treatment to specific patients was likely to do damage to others. They believed that better medical services could be provided through mutual concern and good manners between medical personnels and patients. Dental hygienists of type 2 considered it hard to treat patients who were picky and looked at treatment or its outcome negatively. Those who had to be separated from others on account of possible cross-infection or who called for special decontamination methods of dental instruments were also difficult to deal with. Dental hygienists of this type could be said to "avoid picky patients", as they preferred to fare with patients by offering good, faithful treatment rather than by giving special treatment. Dental hygienists of type 3 believed that smooth and successful treatment hinged on mutual trust, confidence and collaboration between medical personnels and patients. According to them, patients who choose a specific hospital or a particular medical team at their own option have to cooperate if necessary, listen carefully to medical personnels and treat them without any hostility or bias. Therefore, they could be said to "avoid patients who were not cooperative".

• Journal of dental hygiene science
• /
• v.23 no.2
• /
• pp.154-168
• /
• 2023

Background: Legal regulations and fees have been established in Korea to provide visiting oral health care services to individuals with long-term care insurance (LTCI). However, beneficiaries of this service are very limited. Therefore, to improve the Korean system we propose a comparative analysis with the Japanese system. Methods: This study is a descriptive analysis based on secondary data, such as statistics, laws, and service record forms from Korea and Japan. The most recent institutional documents were obtained through a Google search. The variables investigated were financial resources of LTCI, co-payment structure, monthly limit of LTCI benefits, care levels of LTCI, service providers, service costs, contents of service, and the number of cases of service. Results: In both Korea and Japan, LTCI is financed through a combination of taxes and insurance premiums. However, the monthly limit for receiving LTCI services in Japan is about 2.4 times higher than in Korea. Visiting medical and dental treatment is also possible in Japan. Furthermore, nursing staff can provide daily oral health care services according to dental hygienists' instruction unlike Korea. Oral health care services in Korea are focused on oral hygiene and prevention of oral diseases, while Japan additionally provides oral function screening, patient education for oral health management, and training for nursing staff to enhance oral function, eating, and swallowing of the patients. Conclusion: We concluded that the possibility of visiting dental treatment, differences in monthly limit of LTCI benefits, oral function assessment and guidance, as well as collaboration with other healthcare professionals contributed to the difference in the frequency of utilization of visiting oral health care services between Korea and Japan.

• Journal of dental hygiene science
• /
• v.14 no.2
• /
• pp.198-206
• /
• 2014

The purpose of this study was to develop and validate tool for measuring the communication skills of dental hygienist. The survey was modified and revised to fit into Korean culture. Also the reliability and validity was tested in order to ensure the survey was properly evaluating communication skills of dental hygienists. A survey was conducted with outpatients in dental clinics located in Seoul, Gyeonggi, and Daejeon area. The 483 answers out of the total collected answers were used for the final analysis of the study, using PASW Statistics 18.0 and IBM SPSS AMOS 7.0 to measure the validity and reliability. The factor analysis showed that the communication skill of the dental hygienists was composed of three elements, namely 'being caring and respectful' communications, 'sharing information' communications and 'tending to comfort' communications to reduce pain and anxiety. The validity of the model examined by a confirmatory factor analysis satisfied most of the relevant requirements. All of the factors had the conceptual reliability and variant extracted index above the minimum requirements, ensuring reliability and concentrated validity. Also, the value of the square of the correlations between all latent factors which was larger than the square of the correlation between all of the factors, thus proving the discriment validity. Cronbach's ${\alpha}$ was 0.8, which shows high reliability level. In conclusion, it was proven that dental hygienist's communication skill measurement tool has high validity and reliability. Further, this study can be used to improve dental hygienists' communication skills. Therefore, this will improve oral health of clients and manage them.

• Journal of Korean society of Dental Hygiene
• /
• v.19 no.6
• /
• pp.1067-1075
• /
• 2019

Objectives: The present study aimed to compare the accuracy of removable partial denture (RPD) frameworks fabricated by selective laser sintering (SLS) before and after electropolishing. Methods: A partially edentulous mandibular model was used as the working model. Scanning of the model was performed using a dental scanner. The framework was designed using CAD software. The metal framework was formed using an SLS 3D printer. 3D scans of the two fabricated prototypes produced before and after electropolishing were overlapped with reference data. The fit was calculated based on Root Mean Square (RMS). Fabrication accuracy was verified using the paired t-test to compare the discrepancy before and after electropolishing. Results: The mean (SD) values of RMS before and after electropolishing were 126.6 (34.19) and 75.86 (21.36), respectively. There was a statistically significant difference before and after electropolishing (p<0.05). Conclusions: Metal frameworks made with SLS 3D printers showed clinically acceptable fit after electropolishing.