• Journal of Animal Science and Technology
• /
• v.52 no.5
• /
• pp.441-448
• /
• 2010

This study was carried out to investigate the effects of the seeding dates and growth periods on the growth characteristics, dry matter yield and feed value of corn for silage in paddy field. The experimental design was arranged in a randomized block design with three replications. Treatments consisted of five seeding dates, 1 May (T1), 8 May (T2), 15 May (T3), 22 May (T4) and 29 May (T5). And harvesting time homologized by August 24. Therefore, growing periods were 115 days (T1), 108 days (T2), 101 days (T3), 94 days (T4) and 87 days (T5), respectively. In maturities at harvest time, T1, T2, T3, T4 and T5 were full dent, early dent, late dough, dough and early dough stage, respectively. Plant height and numbers of root system were highest in T5 (p<0.01), but leaf length was higher in T4 than others (p<0.05). Dead leaf, tip filling degree and ear circle were higher in T1 than others (p<0.05, 0.01). Leaf width, ear height, leaf number, ear length, stem diameter, stem hardness and brix were not significantly different among the treatments. Dry matter yield and TDN yield were higher in the order of T1 > T2 > T3 > T4 > T5 (p<0.01). Crude protein, crude ash, NDF, ADF and crude fiber were significantly higher in T4 (p<0.05, 0.01). But crude fat was the highest in T1, T3 was the lowest as compared to other treatments (p<0.01). Total EAA(essential amino acids) were higher in order of T4 > T3 > T1 > T2 > T5, and total NEAA (nonessential amino acids) were higher in order of T1 > T4 > T2 > T3 > T5, and total amino acids were higher in order of T4 > T1 > T3 > T2 > T5. But no significant differences were found among the treatments. TUFA (total unsaturated fatty acid) and TSFA (total saturated fatty acid) were in order of T1 > T2 > T3 > T5 > T4 (p<0.01). Minerals were the highest in T4 (4,721.25 mg/kg), and T2 (2,970.80 mg/kg) was the lowest as compared to other treatments (p<0.05). Based on the above results, seeding dates could be recommended as early May, and harvest times is yellow ripe stage for qualitative and quantitative production of corn for silage in rice paddy field soil.

• The Journal of Korean Academy of Prosthodontics
• /
• v.58 no.3
• /
• pp.177-184
• /
• 2020

Purpose: The purpose of this study was to compare and evaluate the tensile bond strength of chairside reline resin to denture base resin fabricated by different methods (subtractive manufacturing, additive manufacturing, and conventional heat-curing). Materials and methods: Denture base specimens were fabricated as cuboid specimens with a width of 25 mm × length 25 mm × height 3 mm by subtractive manufacturing (VITA VIONIC BASE), additive manufacturing (NextDent Base) and conventional heat-curing (Lucitone 199). After storing the specimens in distilled water at 37℃ for 30 days and drying them, they were relined with polyethyl methacrylate (PEMA) chairside reline resin (REBASE II Normal). The subtractive and additive manufacturing groups were set as the experimental group, and the heat-curing group was set as the control group. Ten specimens were prepared for each group. After storing all bound specimens in distilled water at 37℃ for 24 hours, the tensile bond strength between denture bases and chairside reline resin was measured by a universal testing machine at a crosshead speed of 10 mm/min. The fracture pattern of each specimen was analyzed and classified into adhesive failure, cohesive failure, and mixed failure. Tensile bond strength, according to the fabrication method, was analyzed by 1-way ANOVA and Bonferroni's method (α=.05). Results: Mean tensile bond strength of the heat-curing group (2.45 ± 0.39 MPa) and subtractive manufacturing group (2.33 ± 0.39 MPa) had no significant difference (P>.999). The additive manufacturing group showed significantly lower tensile bond strength (1.23 ± 0.36 MPa) compared to the other groups (P<.001). Most specimens of heat-curing and subtractive manufacturing groups had mixed failure, but mixed failure and adhesive failure showed the same frequency in additive manufacturing group. Conclusion: The mean tensile bond strength of the subtractive manufacturing group was not significantly different from the heat-curing group. The additive manufacturing group showed significantly lower mean tensile bond strength than the other two groups.

• Restorative Dentistry and Endodontics
• /
• v.36 no.4
• /
• pp.306-312
• /
• 2011

Objectives: This clinical study evaluated the effect of light activation on the whitening efficacy and safety of in-office bleaching system containing 15% hydrogen peroxide gel. Materials and Methods: Thirty-three volunteers were randomly treated with (n = 17, experimental group) or without light activation (n = 16, control group), using Zoom2 white gel (15% $H_2O_2$, Discus Dental) for a total treatment time of 45 min. Visual and instrumental color measurements were obtained using Vitapan Classical shade guide and Shadepilot (DeguDent) at screening test, after bleaching, and 1 month and 3 month after bleaching. Data were analyzed using t-test, repeated measure ANOVA, and chi-squared test. Results: Zoom2 white gel produced significant shade changes in both experimental and control group when pre-treatment shade was compared with that after bleaching. However, shade difference between two groups was not statistically significant (p > 0.05). Tooth shade relapse was not detected at 3 months after bleaching. The incidence of transient tooth sensitivity was 39.4%, with being no differences between two groups. Conclusions: The application of light activation with Zoom2 white gel system neither achieved additional whitening effects nor showed more detrimental influences.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.35 no.5
• /
• pp.413-423
• /
• 1990

Corn proteins have been known as nutritionally poor, being deficient in the essential amino acids. lysine and tryptophan. Improving the quality of protein in the corn grain would be a great benefit to the farmer. This study was conducted to evaluate the variation of the protein content and the protein constitution of the maize germplasms in the Crop Experiment Station in 1989. The average protein content of 101 germplasms was 11.5% with range from 8.0% to 17.3%. Elite hybrid field corns and table corns possessed 9.1-13.9% protein for the dried whole kernel. Major amino acids were glutamic acid and leucine. Lysine and methionine were limited. Varietal differences were observed in the amino acid composition. Qpm, a modified opaque-2 mutant had 1.4-1.7 times higher lysine content than Suwon 19, a dent corn and Suwon SS-21, a sweet corn. Suwon SS-21 had high threonine content. Maize seed protein gave three fractions. an alchol-soluble fraction (zein), an alkali-soluble fraction (glutelin), and a salt-soluble fraction (globulin) by the Osborne method. The zein fraction accounted respectively for 50.7% and 41.7% of the total protein is Suwon 19 and Suwon SS-21. The nonzein fractions increased in percentage of total protein in Qpm kernels. The amino acid composition of zein fraction from three types maize endoperms of dent, sweet and opaque-2 was essentially identical. Zein contained the high contents of glutamic acid and leucine but low content of lysine. The glutelin fractions of three types maize endosperms were mainly similar in overall amino acid composition. The lysine content of glutelin was higher than that of zein. The amino acid composition of globulin fraction was some different from those of zein and glutelin In Qpm it had higher levels of histidine and lysine than both of zein and glutelin. The increased lysine content in Qpm was resulted from changing the proportions of proteins which contained different levels of lysine.

• Korean Journal of Agricultural Science
• /
• v.4 no.2
• /
• pp.215-228
• /
• 1977

In order to provide good germplasm for developing good corn hybrids, a total of 948 Korean indigenous corn lines were collected from various parts of country and major morphological characterstics of ears were investigated. The results obtained were as follows; 1) Ear Type; From the east-north mountaionus region where more than 80% of total corn production is practiced, cylinder (type I) or similar types to cylinder corn were collected, and from the southern plain region, where rather small scales of corn is grown, cone type (type IV) or similar types to cone were prevalent. 2) Kernel color; In the ear colors of all the indigenous corn lines collected from ten regions, ears with mono color were 54.4%, ears with two color mixed were 39.0% and ears with three or more color mixed were 6.6%. In northern mountainous region, region A and region I, ear color was mostly white or white plus other colors, while in other regions ear color was yellow or yellow plus other colors. 3) Denting; Dent type was only 4.3% of Korean indigenous corn lines collected, and others were flint type. Dent type was collected from northern regions, where foreign corn varieties were introduced and grown. 4) Ear row number; Ear row numbers of indigenous corn lines collected were 12 to 16. There was no significant differences among the ear row numbers in a ear ciassified by regions. However, it was observed that ear row number was closely related to kernel size. For instance, the ears with 24 ear-rows were the smallest in kernel size. 5) Quality of starch; 70.9% of the indigenous corn lines collected were kernels with hard starch. Corn with soft starch was 26.0% and medium type was 3.1%. In region A and region I, where lot of corn is grown, corn with hard starch was more frequently collected. 6) Pop corn and waxy corn; In all the indigenous corn lines collected, popcorn was distributed uniformly through the regions except region I, and waxy corn was found more in the northern mountainous region. 7) Ear length; The mean ear length of indigenous corn lines collected was 13cm. In region A and region I ear length was larger than that in other regions. 8) Ear diameter; The mean ear diameter of indigenous corn lines collected was 3.3cm. In region A and region I ear diameter was larger than that in other regions. 9) Kernel length, kernel width and kernel thickness; The mean kernel length, kernel width and kernel thickness of indigenous corn lines collected were 0.82cm, 0.42cm, and 0.78cm, respectively. The kernel size in the region A and region I was larger than that in other regions. 10) Ear weight; The mean ear weight of indigenous corn lines collected was 58.04gr. Ear weight was remarkably heavier in region A and region I. The heaviest ear weighed 330gr, and the lightest ear weighed 5 gr. 11) Kernel weight of a ear and 100 kernel weight; Kernel weight of a ear and 100 kernel of indigenous corn lines collected were 47.07gr and 15.07gr, respectively. Kernel weights and 100 kernel weights were much heavier in region A and region I than other regions.

• The Journal of the Korean dental association
• /
• v.50 no.4
• /
• pp.203-210
• /
• 2012

Objective: The aim of this study was to investigate the incidence of the C-shaped canal of permanent mandibular second molar (PMSM) in Korean sub-population using Cone-Beam CT (CBCT) data and analyze the types of C-shaped canal. Materials & Methods: The protocol for this study was approved by the Institutional Review Board at the Pusan National University Hospital (E-2011039). Among the CBCT images taken of patients who visited the St. Bennedict Dental Hospital (Busan, Korea) from May 2008 to April 2011 for implant surgery and surgical removal of impacted teeth, high-quality CBCTs from 705 patients (361 male and 342 female) were screened and 607 PMSMs of 383 patients were evaluated retrospectively. All PMSMs were anatomically analyzed in detail by using image viewer software (EasyDent; Vatech). PMSMs were evaluated in the axial plane to investigate the shape of root and canals. The C-shaped canals were classified into five types. The total incidence, gender ratio, bilateral and unilateral appearance. and the correlation between right-side and left-side occurrences of C-shaped PMSMs were computed and compared statistically using the chi-square test. Results: Among the 607 PMSMs of 383 CBCTs of 187 females and 196 males, 198 PMSMs(32.6%) had C-shaped root and 158 PMSMs(26.0%) had C-shaped canals. The shape of C-shaped root canals at the furcalion level did not have significant change at the level of mid root (P<0.0001). Female had more prevalence of C-shaped root canals than male (P<0.0001). The prevalence of bilateral occurrence of C-shaped root canals was higher than unilateral occurrence. Conclusions: The occurrence of C-shaped PMSMs among a Korean population was 32.6% and was higher than other countries and ethnicities. Understanding the prevalence of PMSMs with a C-shaped root and/or canal in a Korean population may be useful for successful endodontic treatments.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.23 no.7
• /
• pp.80-86
• /
• 2019

As computer performance improves, research using deep learning are being actively carried out in various fields. Recently, deep learning technology has been applying to the safety evaluation for structures. In particular, the internal blades of a turbine structure requires experienced experts and considerable time to detect surface damages because of the difficulty of separation of the blades from the structure and the dark environmental condition. This study proposes a Faster R-CNN deep learning model that can detect surface damages on the internal blades, which is one of the primary elements of the turbine structure. The deep learning model was trained using image data with dent and punch damages. The image data was also expanded using image filtering and image data generator techniques. As a result, the deep learning model showed 96.1% accuracy, 95.3% recall, and 96% precision. The value of the recall means that the proposed deep learning model could not detect the blade damages for 4.7%. The performance of the proposed damage detection system can be further improved by collecting and extending damage images in various environments, and finally it can be applicable for turbine engine maintenance.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.9
• /
• pp.411-417
• /
• 2017

It is necessary to determine the current and future energy consumption by farm households for the rational specification of energy related policy in the Korean agricultural sector. Especially, It is important to identify the consumption by source of energy and by the crops. On the other hand, the world has tried to reduce the production of greenhouse gases and, in line with this, the Korean government established related legislations to contribute to this reduction (30% reduction in emissionsby 2020). The reduction target of the agricultural sector is specified as 5.2% of the national total. This study focuses on sampling design to determine the energy consumption and emission of greenhouse gases, and suggests several alternatives to improve the confidence level and to make a dent survey and estimation errors. The population for the energy consumption survey of the agricultural sector was derived from agricultural census data. In the case of commodities with high skewness, we cut the sample range to within the statistical significant range. The number of samples in each class is specified using the Neyman allocation method and 95% significance level. The estimation results are compared with the population to verify the statistical significance and several management methods of sampling errors are suggested.

• Restorative Dentistry and Endodontics
• /
• v.24 no.1
• /
• pp.147-155
• /
• 1999

The purpose of this study was to investigate the effect of phosphoric acid concentration on the movement of 2-hydroxyethylmethacrylate(HEMA) from bonding resin - resin composite combination through dentin in vitro. Freshly extracted human third molar teeth were divided into four groups each of 10 teeth. A closed chamber with 1 ml distilled water was attached to the CEJ of each tooth. An occlusal cavity of 4mm diameter & remaining dentin thickness of 1.0-1.5mm was prepared in each tooth. Dentin was treated with 10% phosphoric acid gel for 15 seconds. 32% phosphoric acid gel for 15 seconds, or with 35% phosphoric acid gel for 15 seconds. A control group not treated with acid gel was also prepared. The cavities were rinsed, dried and then treated with the HEMA-containing All-Bond 2 primer & bonding resin which was light-cured for 10 seconds. The cavities were then restored with Z100 composite resin(shade:A3.5:3M Dent. Prod. USA) & light cured for 30 seconds. Water samples were retrieved from the chambers over a time course (4.32, 14.4, 43.2, 144 & 432 minutes ; 1, 3 & 10 days) and analyzed by high performance liquid chromatography. The results were as follows. 1. HEMA was detected in the pulp chambers of all teeth from 4.32 minutes after resin placement The highest rate of release was in the first sample period (0-4.32 min) & rate of release declined exponentially thereafter. 2. No significant differences were found for mean release rate for HEMA over a time course among the four groups (p>0.05). 3. The diffusion rate was significantly (p<0.05) less for 10% phosphoric acid gel than 32% phosphoric acid gel at the second sample period(4.32-14.4 min). 4. No significant differences were found for cumulative HEMA diffusion among the four groups at 10 days(p>0.05) and mean total(cumulative) release at 10 days for all groups was in the 9 - 16 nmol range. 5. The cumulative release was significantly (p<0.05) less for 10% phosphoric acid gel than 32% phophoric acid gel at the third(14.4-43.2 min) & fourth(43.2-144 min) sample period.

• Progress in Medical Physics
• /
• v.28 no.4
• /
• pp.156-163
• /
• 2017

To verify the usefulness of a steam sterilizer equipped with an electronic Bowie-Dick test system, this study was carried out using two methods, utilizing both a steam sterilizer and an electronic Bowie-Dick tester. The first method is to confirm the error detection of the chemical Bowie-Dick test pack and the electronic Bowie-Dick tester in a malfunctioning sterilizer environment. For this purpose, the Bowie-Dick test program for the steam sterilizer was used to test three types of test packs commonly used in hospitals and the electronic Bowie-Dick tester by changing the set values of temperature, time, and vacuum frequency. The second is an experiment to check the sterilizer's normal operation with the electronic Bowie-Dick tester and the usefulness of grasping the cause of the malfunction. The results showed that the sterilization temperature was the same as that of the test pack at a temperature $1{\sim}6^{\circ}C$ lower than the reference temperature of $134^{\circ}C$. In the test with the sterilization exposure time as a variable, there was a normal discoloration at a time difference of 30~90 s. In the experiment using the number of vacuum cycles, the test was correct by performing the normal discoloration only at the normal condition of 3 times. The test results of 30 hospitals were 100 failure tests by a total of 291 Bowie-Dick tests. Of these, the failure factors related to an internal temperature that the chemical test packs could not detect were the greatest, and the four factors related to temperature, including the internal temperature, were found to be 71.18% of total malfunctions. In addition, the Bowie-Dick tester was provided within 30 min after the start of the Bowie-Dick test to confirm the performance of the sterilizer and the detailed cause. A steam sterilizer equipped with an electronic Bowie-Dick test system is used to manage individual sterilizers. In the current steam sterilizer with many temperature-related errors, it is possible to check the malfunction of the temperature difference that the test pack cannot detect, and the cause of error for the sterilizer is immediately detected after the test. The steam sterilizer equipped with the electronic Bowie-Dick test system assists with infection control with accurate sterilizer performance assurance.