• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1995년도 추계학술발표회논문집(1)
• /
• pp.254-259
• /
• 1995

Large scale display panel(LSDP) is a main component in the next generation main control rooms. LSDP is located at the front of VDU-based operator's workstation and plays an important role in providing operators with overall information of plant status through mimic diagram, text/digit, graph, and so on. A critical matter determined at the first stage of LSDP design is how much information is displayed, because the information density of LSDP affects operator's performance. Many human factors guidelines recommend low information density of displays to avoid degrade of operator's performance, but doesn't provide a useful limit of information density. In this paper, we considered information density as the number of plant parameters and investigated the proper number of plant parameters through a human factors experiment. The experiment with 4 subjects was carried out and response time, error, and heart rate variation as criterion measures were recorded and analyzed. As the results, it is identified that the proper number of parameters in a LSDP is about thirty.

• Environmental Sciences Bulletin of The Korean Environmental Sciences Society
• /
• 제4권1호
• /
• pp.43-50
• /
• 2000

In this study, experiments were carried out to measure the variations in the corrosion potential and current density of polarization curves using polycarbonate. The results were particularly examined to identify the influences affecting the corrosion potential including various conditions such as temperature, pH, catalytic enzyme, and salt. The lines representing the active anodic dissolution were only slightly shifted in the potential direction by temperature, pH, enzyme, and salt. The tafel slope for the anodic dissolution was determined based on the polarization effect with various conditions. The slope of the polarization curves describing the active-to-passive transition region were noticeably shifted in direction. Also, from the variation in the conditions, the optimum conditions were established for the most rapid transformation, including temperature, pH, corrosion rate, and resistance of corrosion potential. The second anodic current density peak and maximum passive current density were designated as the critical corrosion sensitivity(Ir/If). The value of Ir/If was then used in measuring the extent of the critical corrosion sensitivity of the polycarbonate. The potentiodynamic parameters of the corrosion were obtained using a Tafel plot.

• 한국응용과학기술학회지
• /
• 제28권3호
• /
• pp.306-312
• /
• 2011

In this study, we are crystallized to the low density polyethylene (LDPE) micro-particles in $n$-dodecanol solution by thermally induced phase separation(TIPS) method. The Low density polyethylene micro-particles is used in a wide variety of polymer coatings and industrial application. The utility of that for a particular application depends on a number of factors such as the particle size and distribution, and chemical composition of the materials. However, there are still needs for new methods of preparation which will provide the structure with unique sizes. The widely used processes for micro-size particles are crystallization method and thermally induced phase separation. TIPS process based on the phase separation mechanism was performed for the LDPE system which undergoes liquid-solid phase separation. Effects of various operating parameters were examined on the structure variation of the particles. Professionality, take-up speed and crystallization rate depended on temperature and concentration of polymer in solution.

• Nuclear Engineering and Technology
• /
• 제42권3호
• /
• pp.297-304
• /
• 2010

In the design of advanced light water reactors (ALWRs) and in the safety assessment of currently operating nuclear power plants, it is necessary to evaluate the possibility of experiencing a degraded core accident and to develop innovative safety technologies in order to assure long-term debris cooling. The objective of this experimental study is to investigate the enhancement factors of dryout heat flux in debris beds by coolant injection from below. The experimental facility consists mainly of an induction heater, a double-wall quartz-tube test section containing a steel-particle bed and coolant injection and recovery condensing loop. A fairly uniform heating of the particle bed was achieved in the radial direction and the axial variation was within 20%. This paper reports the experimental data for 3.2 mm and 4.8 mm particle beds with a 300 mm bed height. The dryout heat density data were obtained for both the top-flooding and the forced coolant injection from below with an injection mass flux of up to $1.5\;kg/m^2s$. The dryout heat density increased as the rate of coolant injection increased. At a coolant injection mass flux of $1.0\;kg/m^2s$, the dryout heat density was ${\sim}6.5\;MW/m^3$ for the 4.8 mm particle bed and ${\sim}5.6\;MW/m^3$ for the 3.2 mm particle bed. The enhancement factors of the dryout heat density were 1.6-1.8.

• Fisheries and Aquatic Sciences
• /
• 제24권3호
• /
• pp.121-128
• /
• 2021

The variations of morphological features, density and biomass of vegetative shoots and characteristics of reproductive shoots of Zostera caespitosa were examined in Tongyeong, Korea. Morphological features such as leaf length, width and sheath length of Z. caespitosa showed significant seasonal variation (p < 0.001). The highest aboveground value was recorded in late spring to summer and the lowest value in winter. Density and biomass also showed seasonal variations. Annual average shoot density and biomass of Z. caespitosa were recorded as 1,223.4 leaf m^-2 and 5,956.9 g w.w.m^-2, respectively, and had the highest value in June and lowest values in November and January. Reproductive shoots were observed from April (13℃) to June (21℃). Pistils erected outside sheath, anther dehiscing and small embryos were found in April. Mature fruit and released seeds were found in May and June. These results suggest that this species had a high growth rate in late spring and early summer (15℃-20℃). Reproductive shoots of Z. caespitosa may initially appear at about 10℃ in spring and seed have been released at about 20℃ in fall.

• 한국결정학회지
• /
• 제14권2호
• /
• pp.56-61
• /
• 2003

Nanocrystalline hydrogenated silicon (nc-Si : H) thin films were deposited at room temperature by plasma enhanced chemical vapor deposition (PECVD): a mixture of SiH₄ and H₂ gas was introduced into the evacuated reaction chamber. When the H₂ gas flow rate was low, the density of Si-H₃ bonds was high in the films. On the other hand, when the H₂ gas flow rate was high, e.g., 100 sccm, a large number of Si-H bonds contributed to the passivation of the surface of the large volume of Si nanocrystallites. The relative fraction of the Si-H₃ and Si-H₂ bonds in the amorphous matrix varied sensitively with the H₂ gas flow rate. The variation was associated with the change in the intensity as well as the wavelength of the main PL peaks, indicating the change in the total volume as well as the size of the Si nanocrystallites in the films.

• 한국수소및신에너지학회논문집
• /
• 제9권1호
• /
• pp.1-7
• /
• 1998

Most of today's energy supply is obtained from fossil fuels. Despite of high energy density, higher store efficiency and long mileage, fossil fuels cause environmental pollution and their reserves are limited. In this study pure hydrogen gas and oxygen gas are burned without the emission of pollution. A gas turbine is used to obtain power. Water is injected into a combustor, which prevents overheating and recovers cooling heat. Excessively supplied water is recirculated. With variation of mass flow rate and equivalence ratio, the affection of water injection rate and the temperature of injected water on efficiency and power are experimented. Injected water gets cooling heat, is expanded from liquid to vapor and raises the thermal efficiency. It is enable to determine the rate of water injection, which makes the maximum power. The increase of temperature of water injection raises the efficiency of the system.

• 대한전자공학회논문지
• /
• 제23권5호
• /
• pp.597-604
• /
• 1986

This paper describes various mismatch phenomena in differential pulse code modulation (DPCM) coding, such as the mismatch effects of probability density functin(pdf), signal variance, and correlation. At a high transmission rate(i.e., above 32 kbits/s), the performance of DPCM can be improved by matching the pdf shape between the input signal and the quantizer. However, the same gain cannot be obtained at a lower transmission rate. Also, it is shown that the gamma quantizer is realtively robust to the variation of pdf shaper and signal variance. Moreover, as the transmission rate increases, the performance of DPCM for the input signal with large variance is worse than that of DPCM for the signal with small variance due to the increase of overload noise. According to our simuladiton results, the mismatch effects of pdf shape and variance appear to yield more degradatin than that of correlation in a DPCM system.

• 유기물자원화
• /
• 제12권4호
• /
• pp.121-129
• /
• 2004

혐기성 소화공정은 하수슬러지의 안정화와 VS 감소 및 바이오가스 생산의 장점으로 인해 가장 일반적인 하수슬러지 처리공정이다. 혐기성 소화공정에서 하수슬러지의 분해속도가 느리기 때문에 가수분해 속도를 향상시키기 위한 많은 전처리 방법들이 연구되어져 왔다. 본 연구에서는 주로 초음파의 음향강도와 조사시간에 따른 하수슬러지의 초음파 분해에 대한 영향을 검토하였다. 본 연구에서는 주로 초음파의 음향강도와 조사시간에 따른 하수슬러지의 초음파 분해에 대한 영향을 검토하였다. 실험은 초음파의 발진주파수를 40kHz로 하여 초음파 조사밀도를 각각 33W/L, 70W/L, 88W/L 및 139W/L로 변화시켜 조사하였고, 초음파 조사시간을 각각 10분, 20분, 25분, 30분, 그리고 40분으로 변화시켜 잉여슬러지와 혼합슬러지의 분해 정도를 평가하였다. 잉여슬러지와 혼합슬러지 분해에 대한 $SCOD_{Cr}/TCOD_{Cr}$비의 변화 비교에서 초음파 발진주파수가 40kHz일 때 초음파의 음향밀도가 증가할수록 그리고 조사시간이 길어질수록 $SCOD_{Cr}/TCOD_{Cr}$의 비가 증가함을 보였다. 초음파 전처리 후에 잉여슬러지와 혼합슬러지의 pH는 발진주파수 40kHz에서 음향밀도가 증가할수록 그리고 조사시간이 길어질수록 감소하였다.

• 한국환경보건학회지
• /
• 제4권1호
• /
• pp.23-25
• /
• 1977

Transaminase has been a popular methods in the clinical laboratory for the diagnosis of particular diseases. The methods we are familiar with should be considered further on the serum states provided on the test to be done. (serum freshness, temperature and duration preserved) I have studied transaminase activities of the serum preserved under frozen (-10$\circ$C), refrigerated (4$\circ$C) and room temperature conditions. At a given interval those activities of serum are measured and then the results are compared with the optical density and calculated for the standard deviation and percent variation (Table 1. & Fig. 1.) G.O.T. activity is maintained decreased at a relatively constant rate from 2nd day to 14th day preservation under frozen and refrigerated but its activity variation at 25$\circ$C are far greater than the above conditions throughout the test periods. Elevated G.P.T. level of serum compared with G.O.T. are remained at any temperature and duration. Unless the determination of amino acid level study can not ruled out clearly.