• 한국토양비료학회지
• /
• 제50권5호
• /
• pp.482-488
• /
• 2017

The measurement based on reliable standard operating procedures (SOPs) is important for consistent information. The objective of this study is to investigate reliable SOPs of soil physical methods, including core method for bulk density, Yamanaka hardness, and air permeameter method for air permeability. The coefficients of variation in bulk density (core method), Yamanaka hardness, and air permeability were ranged of 1~6%, 8~13%, and 10~84%, respectively. The variation in situ measurement such as bulk density, hardness, and air permeability due to spatial variability at measuring site was larger due to the number of replicates, organic matter content, and soil texture. Nevertheless, air permeability had different values as different number of replicates, and thus, it is thought that more replicates can result in higher reliability. It suggested that investigation of soil physical properties for the target sites should required to consider about soil texture, organic matter content, and number of replications before measurement. In conclusion, core sampling for bulk density measurement in upland soil recommended to perform in 3 repetitions with 2 inch core, and 3 inch core sampling for higher organic matter content.

• 한국응용과학기술학회지
• /
• 제34권4호
• /
• pp.1112-1120
• /
• 2017

석유제품은 다양한 형태의 탄화수소화합물로 구성되어진 화합물로, 다른 종류의 액체류와 마찬가지로 온도변화에 따른 밀도와 부피의 변화가 발생한다. 액상에서 석유제품의 밀도를 측정하는 방법은 분별 증류된 각 석유제품에 대해 주로 얻어진 실험 데이터를 기반으로 한다. 본 연구에서는 등유와 자동차용 경유의 온도변화에 따른 밀도와 부피변화를 실제 측정하여 온도변화에 따른 변화추이를 분석하고, 국제규격인 ASTM에서 제시하는 밀도부피 환산표를 이용한 환산값을 계산하고 두 값을 비교분석하였다. 또한, 국내 계량 관련법에서 규정하고 있는 온도변화에 대한 기준과 실측값과의 상호 비교를 통해 차이점을 분석하였다.

• 한국가시화정보학회지
• /
• 제19권2호
• /
• pp.56-62
• /
• 2021

Solid oxide fuel cells (SOFCs) is the high efficiency fuel cell operating at high temperatures ranging from 700-1000℃. Design of the flow paths of the fuel and air in SOFCs is important to improve cell performance and prevent cell degradation. However, the uneven distribution of current density in the traditional type having one inlet and outlet causes cell degradation. In this regard, the parallel flow path with two inlet and outlets was designed and compared to the traditional type based on computational fluid dynamics (CFD) simulation. To check the cell performance, hydrogen distribution, velocity distribution and current density distribution were monitored. The results validated that the parallel designs with two inlets and outlets have a higher cell performance compared to the traditional design with one inlet and outlet due to a larger reaction area. In case of uniform-type paths, more uniform current density distribution was observed with less cross-sectional variation in flow paths. In case of contracted and expanded inflow paths, significant improvement of performance and uniform current density was not observed compared to uniform parallel path. Considering SOFC cell with uniform current density can prevent cell degradation, more suitable design of SOFC cell with less cross-sectional variation in the flow path should be developed. This work can be helpful to understand the role of flow distribution in the SOFC performance.

• Composites Research
• /
• 제22권3호
• /
• pp.35-43
• /
• 2009

본 연구에서는 카본블랙이 충전된 ethylene-propylene dine monomer(EPDM) 고무에 대한 가교밀도 측정법을 확립하고 EPDM 고무호스에 대해 열가속 및 산소스트레스를 가하여 가교밀도 변화를 측정하였다. 노화 초반에는 산화황가교의 형성으로 고무의 가교밀도측정값이 약간 저하하였다가 노화시간이 지남에 따라 일부 미반응 황 분자들의 가황반응으로 추가적인 가교 결합을 형성하면서 가교밀도측정값은 점차 증가하였다. 이들 가교밀도 변화거동은 인장강도의 거동과 유사하였다. $180^{\circ}C$의 고온노화에서는 노화시간이 길어짐에 따라 노화에 따른 가교밀도의 증가폭은 그다지 크지 않았으나, 인장강도와 신장률은 크게 저하하였다. 즉, 온도가 높을 수록 EPDM 고무의 가교밀도의 변동보다는 EPDM 분자사슬에서의 산화물(carbonyl groups) 형성과, 가교점의 산화황 생성으로 기계적 물성의 열화가 일어난 것이다.

• 한국환경보건학회지
• /
• 제34권2호
• /
• pp.131-136
• /
• 2008

The variation of the particle size distribution and density as well as the chemical composition of aerosols is important to evaluate the particles. This study measured and analyzed airborne particles using a scanning mobility particle sizer (SMPS) system and an aerodynamic particle sizer (APS) at the University of Seoul during every season. The highest particle number concentration of airborne particles less than $0.9\;{\mu}m$, occurred in winter, while the highest particle number concentration of airborne particles more than $0.9\;{\mu}m$, occurred in spring. Mass concentration appeared highest at spring. Also, when we compared $\beta$-ray's mass concentration with calculated mass concentration by using the SMPS-APS system during each season, density of the winter is $1.92\;g/cm^3$, spring density is $1.64\;g/cm^3$, fall density is $1.57\;g/cm^3$. We found out that PM10 density was differ every season. However, while the calculated density is whole density for PM10 the density of each diameter was different. In this study the density estimation equation of the QCM cascade impactor measured mass concentration of each diameter.

• 펄프종이기술
• /
• 제41권5호
• /
• pp.50-58
• /
• 2009

Periodic variation of local paper structure was evaluated using two-dimensional fast Fourier transform (FFT) and spectral analysis. Since the periodic variation could originate from various sources and have different magnitudes and patterns depending on the origins, a complete analysis of local paper structure properties such as local grammage, local thickness, local apparent density and surface topography was proposed in this study. For a commercial copy paper, the individual periodic patterns for each local structural property were identified by using inverse FFT spectrums of the filtered spectrum. The spectral analysis of newsprint sample provided the period of variation quantitatively, which was useful in comparing the origins of the individual periodic patterns of the local structural properties.

• 조명전기설비학회논문지
• /
• 제27권7호
• /
• pp.45-51
• /
• 2013

This study is to discuss simulation results with 51 principal chemical reactions in non-thermal plasma space under atmospheric pressure, and the ambient gas was mainly composed of oxygen and nitrogen molecules. The initial density of O and OH radicals under the ambient temperature of 300K is largely generated in comparison with other higher temperature, and the density of O radical decreased from $20{\mu}s$ according to increase the temperature. The initial density of OH radical seemed to decrease steeply at the initial stage. By increasing the initial density of $H_2O$ molecules, O radical's effect was few and the density of OH radical was largely generated about 2 times. In addition, ozone density was increased as increasing the density of O radical, but it was decreased as increasing the density of $H_2O$. In case of the temperature more than 300K, $NO_2$ tend to be removed, but NO was increased than the initial density.

• 한국산업융합학회 논문집
• /
• 제9권1호
• /
• pp.37-44
• /
• 2006

Stress and displacement fields of a Mode III crack propagating along the normal to gradient in an orthotropic functionally gradient materials (OFGM), which has (1) an exponential variation of shear modulus and density, and (2) linear variation of shear modulus with a constant density, are derived. The equations of motion in OFGM are developed and solution to the displacement and stress fields for a propagating crack at constant speed though an asymptotic analysis. The first three terms in expansion of stress and displacement are derived to explicitly bring out the influence of nonhomogeneity. When the FGM constant ${\zeta}$ is zero or $r{\rightarrow}0$, the fields for OFGM are almost same as the those for homogeneous orthotropic material. Using the stress components, the effects of nonhomogeneity on stress components are discussed.

• 한국산업정보학회논문지
• /
• 제7권3호
• /
• pp.9-14
• /
• 2002

본 논문에서는 잡음 환경에서 음성 인식기의 성능을 향상시키기 위한 방법을 제안한다. 제안한 방법은 기존의 PMC방법으로 상태 당 가지 수가 많은 모델을 만들 때 발생하는 확률 밀도 분포의 변화를 보상하기 위해 상태 수준에서 조합한 파라미터를 재 추정하여 각 상태에서 가지의 확률 분포의 변화를 적응시키는 방법이다. 상태 당 다수의 가지를 가지는 CDHMM은 제안한 PMC 방법과 조합된다. 또한, EM 알고리즘은 가지 평균의 분산을 줄이기 위하여 모델 평균 파라미터를 적응시키는데 사용한다. 그리고 시뮬레이션을 통하여 본 논문에서 제안한 PMC 방법은 기존의PMC 방법보다 더 향상된 성능을 얻을 수 있었다.

• 한국자기공명학회논문지
• /
• 제10권1호
• /
• pp.59-73
• /
• 2006

Spin-lattice relaxation pathway of $CH_2$ spin system by two dimensional NOESY sequence has been discussed. Two-dimensional spectra governed by dipolar relaxation mechanism were simulated in term of transfer mode, the generalization of conventionally used magnetization mode in one dimension. The transfer matrix directly related to the Redfield relaxation matrix can be constructed by the multiplet of transfer mode. The observable relaxation transfer modes causes to variation of the off-diagonal signal intensity of phase sensitive NOESY spectra from which variable spectral density can be extracted with simple group theoretical calculation. The variation of the J-coupling peak intensity as a function of the mixing time in 2-D spectra for $n-Undecane-5-^{13}C$ and Bromoacetic $2-^{13}C$ acid has been theoretically traced.