• Fibers and Polymers
• /
• 제6권2호
• /
• pp.156-161
• /
• 2005

The gray line-profile method is introduced to find fabric density. Some patterned fabrics like stripe design as well as solid fabrics of basic weave structures are used to verify the efficiency and accuracy of the method. The approach is compared with Fourier transform method. Although the gray line-profile method is concise, it shows good results in both solid and patterned fabrics. In addition, it does not require a pre-processing or filtering technique in space or frequency domain to enhance the image suitable for the analysis. However, the approach is slightly influenced by the filter size for finding the local minimums of profile graph.

• 한국전자통신학회논문지
• /
• 제17권6호
• /
• pp.1175-1180
• /
• 2022

STI는 반도체 소자의 소형화 및 고집적화에 따른 광역 평탄화를 위한 공정 기술로써 많은 연구가 이루어져 왔다. 본 연구에서는 STI의 profile 개선을 위한 방법으로 STI 건식각 후 HF 용액에 의한 pad oxide 습식각과 O₂+CF₄ 건식각을 제안하였다. 이 공정 기술은 기존의 방법보다 소자의 밀집도에 따른 패턴간의 프로파일 불균형과 누설전류의 개선을 나타내었다. 또한 동일한 STI 깊이와 HLD 증착를 갖는 디바이스에 대하여 CMP 후 HLD 두께를 측정한 결과 디바이스 밀도에 따라 측정값이 다르게 나타났고 이는 CMP 후 디바이스 밀도에 따른 질화막의 두께 차이 및 슬러리의 선택비에 기인됨을 확인하였다.

• 한국정밀공학회지
• /
• 제33권10호
• /
• pp.781-787
• /
• 2016

We introduce FEST (Flight Environment Simulation Test) procedures for precise guided missiles to reliably improve systems. Flight vibration specification was established based on power spectral density curves calculated from flight test data of a high speed precise guided missile. A FEST pre-profile was developed according to flight vibration specification and delivered to a precise guided missile assembly. Vibration responses were measured by installing accelerometers on electronic components vulnerable to dynamic forces. The FEST profile was adjusted by comparing the vibration responses and the flight vibration specification. Subsequently, the FEST profile was repeatedly modified through trial and error, because the responses were similar to the flight environment. The modified FEST profile enabled performance testing of assembled precise guided missiles under simulated flight conditions on the ground, where unexpected errors could be corrected before the flight tests, leading to cost and risk reduction in the development of the precise guided missile system.

• Journal of Magnetics
• /
• 제6권4호
• /
• pp.109-118
• /
• 2001

A computer simulation, utilizing the Landau-Lifshitz-Gilbert equation, of ultra-high- density recording on continuous longitudinal media is carried out. The two important features of this work are the use of a planar-type head, which enables a high write field of 14183 Oe ts be generated at the center of the recording medium, and the media with very high coercivities up to 13010 Oe. From a systematic investigation, it is found that the optimum write field is higher than the medium coercivity by only 3400 Oe over a wide coercivity range. This new finding allows one to write an a medium with a very high coercivity by using a planar-type head. It is demonstrated that a reasonably good bit pattern with a bit density of 605 kfci is generated on the medium with a coercivity of l1720 Oe, and, combined with a high track pitch density of 100 ktpi, a recording density of 60 Gb/in$^2$can be obtained in a single layer medium. With an improved write- head designs even a higher recording density of 75 Gb/in$^2$may be possible since comparison of the results for the bit pattern from the present head profile and the ideal Lindholm profile indicates an increase in the track pitch density of about 27%. Even at this density, the thermal stability parameter (KV/kT) at room temperature is high enough (60) to provide ample room for thermal stability.

• Asian-Australasian Journal of Animal Sciences
• /
• 제18권9호
• /
• pp.1310-1319
• /
• 2005

This experiment was conducted to determine the effects of cage density (CD) and humate supplementation (HS) on laying performance, metabolic profile, and egg quality during the peak production period in hens. Lohman layers (n = 180, 46 wks of age) were blocked according to the location of cages and then allocated randomly to two levels of CD (4 or 6 hens per cage or 540 vs. 360 $cm^2$/hen) and three levels of HS (0, 0.15, and 0.30%). Egg production (EP) and feed consumption (FC) were measured daily; egg weight was measured bi-weekly; and BW was measured before and after the experiment. Blood and additional egg samples were obtained at the end of the experiment for determination of metabolic profile and egg quality. The data were analyzed using two-way ANOVA as repeated measures. Except for FC, CD did not affect laying performance parameters. Hens placed in high-density cages had lower FC than hens placed in normal-density cages. Increasing HS level linearly increased FC, EP, and feed conversion ratio (FCR). There was a CD by HS interaction effect on FC and EP. Hens placed in high-density cages had greater serum glucose, total protein, albumin, globulin, Ca, and P concentrations and tended to have greater serum corticosterone concentration than hens placed in normaldensity cages. Increasing HS level linearly increased serum glucose, total protein, albumin, globulin, creatine, and Ca concentrations and linearly decreased serum triglyceride and very low-density lipoprotein concentrations. There was a CD by HS interaction effect on serum glucose and albumin concentrations. There were no alterations in egg quality parameters in response to increasing CD. Albumen index and Haugh unit decreased linearly and other egg quality parameters did not change as HS level increased. In conclusion, increased caging density adversely affected metabolic profile, despite insignificantly deteriorating laying performance. Moreover, benefits from humate supplementation seem to be more noteworthy for hens housed in stressing conditions than for hens housed in standard conditions.

• Journal of Astronomy and Space Sciences
• /
• 제23권3호
• /
• pp.237-244
• /
• 2006

한국천문연구원에서 운영중인 9개의 GPS(Global Positioning System) 상시관측소 데이터를 이용하여 한반도 상공의 고도에 따른 전리층 내의 전자밀도 분포를 산출하였다. 전리층의 전자 밀도를 정밀하게 추정하기 위해 이중주파수(L1,L2) 데이터가 사용되었고, 2차원 총전자수(Total Electron Contents, TEC)값을 기반으로 정밀한 전자 밀도 분포를 얻을 수 있었다. 그리고 토모그래피 모델개발에 널리 사용되고 있는 Inversion 기법 중의 하나인 ART(Algebraic Reconstruction Technique) 알고리즘을 적용하였다. 본 연구에서는 지역적 GPS 관측망을 활용하여 시간에 따른 한반도 상공의 전자밀도 분포 유형을 제시하였고, GPS에 의한 전리층 재구성으로 얻어진 전자밀도 유형을 경험적 모델인 IRI-2001에 의해 계산된 값과 관측으로부터 얻어진 Ionosonde 관측값을 서로 비교하였다. 그 결과 GPS 재구성에 의한 전자밀도 분포 유형이 Ionosonde에 의한 관측값과 잘 일치하는 경향을 보였다.

• 한국진공학회지
• /
• 제7권2호
• /
• pp.155-160
• /
• 1998

256M DRAM급에 해당하는 0.25$\mu\textrm{m}$의 회로선 폭을 가공하기 위해 Arc layer & DUV resist 사용이 필수적이다. Poly-Si 식각시 Arc layer 적용여부 및 resist 종류에 따른 차이 를 TCP-9408 etcher(Lam Research Co.)에서 $Cl_2/O_2, Cl_2/N_2, Cl_2$/HBr 3가지 gas chemistry 를 변화시키면서 조사하였다. 동일한 식각 조건에서 DUV resist사용의 경우에 I-line resist 에 비해 식각 profile이 profile이 positive하고 CD gain도 크게 나왔다. 이것은 resist손실에 의한 polymer생성의 증가가 식각시 측벽 보호막을 강화시키기 때문이다. Arc layer 적용의 경우 Arc layer 식각시 생기는 fluorine계 polymer가 poly-Si 식각시 mask역할을 하므로 CD gain이 증가하는 것으로 나타났다. Gas chemistry에 의한 영향은 $Cl_2/O_2$의 경우가 식각 시 polymer형성을 촉진시켜 positive profile 및 CD gain을 초래하였다. $Cl_2$/HBr의 경우에는 profile이 vertical 하였고 CD gain도 거의 없었다. 또한 dense pattern 과 isolated pattern 사이의 profile 및 CD 차이도 가정 작게 나타났다. HBr gas 사용이 식각시 pattern density 에 따른 측벽 보호막 형성의 불균일성을 최소화 시켜 양호한 특성을 보여주었다.

• 천문학회보
• /
• 제41권2호
• /
• pp.54.3-55
• /
• 2016

We model the spectral energy distribution (SED) of the Class 0 protostar L1527 IRS using a dust continuum radiative transfer code RADMC-3D to study the initial condition of gravitational collapse. To constrain the envelope structure, we use the data obtained by Herschel /PACS, which covers the far-infrared regime ($55-190{\mu}m$) where the SED of L1527 IRS peaks. According to our modeling, a more flattened density profile fits the far-infrared SED of L1527 IRS better than the density profile of a rotating and infalling envelope. Thus, we employ the density structure of a Bonnor-Ebert sphere, which consists of the inner flat-topped and the outer power-law regions and is often used for describing the density structure of the youngest sources in the low mass star formation process. A Bonnor-Ebert sphere fits very well the observed SED at ${\lambda}$ > $10{\mu}m$, suggesting that L1527 IRS might collapse from an unstable Bonnor-Ebert sphere rather than a singular isothermal sphere.

• 한국자동차공학회논문집
• /
• 제5권1호
• /
• pp.136-145
• /
• 1997

To analyzed ride quality and to predict durability in vehicle dynamics, it is essential to describe a road surface profile precisely. This paper presents a technique to generate road surface profiles in a spatial domain by using a power spectral density function. A single track power spectral density function is proposed to describe a road surface profile, which is also applicable for multi-track vehicle response analysis, The derived road surfaces are compared to ISO(International Organization for Standardization) standards and classifications, proposed by the MIRA(Motor Industry Research Association). The methodology in this paper is also proposed to generate road roughness description with a limited external data. A small amount of external curve data is combined with an internal PSD function to generate road surface roughness in a spatial domain.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.98-101
• /
• 2003

As the ultra precision grinding can be applied to wafering process by the refinement of the abrasive. the development of high stiffness equipment and grinding skill, the conventional wafering process which consists of lapping, etching, 1st, 2nd and 3rd polishing could be exchanged to the new process which consists of precision surface grinding, final polishing and post cleaning. Especially, the ultra precision grinding of wafer improves the flatness of wafer and the efficiency of production. Futhermore, it has been not only used in bare wafer grinding, but also applied to wafer back grinding and SOI wafer grinding. This paper focused on the flatness of the ground wafer. Generally, the ground wafer has concave profile because of the difference of wheel path density, grinding temperature and elastic deformation of the equiptment. Tilting mathod is applied to avoid such non-uniform material removes. So, in this paper, the geometric analysis on grinding process is carried out, and then, we can predict the profile of th ground wafer by using profile simulation.