• EDISON SW 활용 경진대회 논문집
• /
• 제5회(2016년)
• /
• pp.347-349
• /
• 2016

본 논문에서는 dopant density에 의존적인 pn junction의 breakdown 특성을 향상시키기 위하여, doping density와 doping profile에 대하여 분석했다. Doping density와 doping profile은 역방향 junction breakdown voltage를 결정하는 중요한 요소인 공핍영역의 두께와 공핍영역 내에 인가되는 electric field를 결정한다. Uniform doping profile과 Gaussian doping profile을 비교했고, 고전압 환경에서 사용할 수 있는 소자를 제작하는데 더욱 적절한 doping profile과 doping 농도에 대해 기술했다.

• Journal of the Korean Wood Science and Technology
• /
• 제52권3호
• /
• pp.234-242
• /
• 2024

In this study, the effect of carbonization temperature and mixing ratio of ceramics manufactured from sawdust, chaff and charcoal on sound absorption performance and density profile was investigated. The density profile of ceramics prepared by the addition rates of sawdust, chaff and charcoal showed the highest value at 91.00% when the ratio of sawdust, chaff and charcoal was 50:25:15. However, the difference in density profile according to the addition rate was insignificant. The density profile of ceramics manufactured according to the carbonization temperature showed the highest value of 88.06% when manufactured at 800℃. However, it does not show any particular trend, so it is understood that the effect of the carbonization temperature on the density gradient is small. On the other hand, the sound absorption coefficients of ceramics prepared by the addition rates of sawdust, chaff and charcoal is between 0.3 and 0.4 at almost all frequencies when the addition rates of sawdust, chaff and charcoal are 50:30:10 and 50:35:5, respectively. Therefore, as the chaff particles increased, the sound absorption performance was improved. In addition, the sound absorption coefficients of the ceramics manufactured at each carbonization temperature showed the highest value in the ceramics manufactured at 1,200℃.

• 조명전기설비학회논문지
• /
• 제27권7호
• /
• pp.52-58
• /
• 2013

The two-dimensional finite difference time domain algorithm is used to numerically reconstruct the electron density profile in O-mode ultrashort pulse reflectometry. A Gaussian pulse is employed as the source of a probing electromagnetic wave. The Gaussian pulse duration is chosen in such a manner as to have its frequency spectrum cover the whole range of the plasma frequency. By using a number of numerical band-pass filters, it is possible to compute the time delays of the frequency components of the reflected signal from the plasma. The electron density profile is reconstructed by substituting the time delays into the Abel integral equation. As a result of simulation, the reconstructed electron density profile agrees well with the assumed profile.

• Journal of the Korean Wood Science and Technology
• /
• 제39권1호
• /
• pp.60-67
• /
• 2011

본 연구에서는 고밀도 우드세라믹을 제조하기 위한 기초 연구로서 수지함침율 및 탄화온도에 따라 제조된 1차 탄화 우드세라믹을 수지 재 함침 후 2차 탄화하여 우드세라믹을 제조하고 밀도경사를 조사하였다. 2차 탄화 후 최소, 평균 및 최고밀도가 1차 탄화 우드세라믹보다 증가하였고, 밀도경사 비율도 증가하였다. 따라서 고밀도와 밀도경사 비율이 작은 균질한 우드세라믹을 제조하기 위해서는 2차 함침과 2차 탄화에 의한 우드세라믹 제조방법도 효과가 있는 것으로 나타났다.

• 비파괴검사학회지
• /
• 제22권5호
• /
• pp.483-489
• /
• 2002

내부가 비어 있거나 유체로 절반 채워진 보온 및 비보온 배관에 대해 방사선 조사 방향에 따른 투과두께와 농도 변화를 전산 시뮬레이션 하였다. 결과적으로 내부가 비어있는 배관의 경우 투과필름에서 농도 변화가 연속적이며 대칭적인 반면, 유체가 절반 채워진 배관의 경우는 방사선 조사 방향에 따라 농도 변화가 비대칭적이며 크게 달라질 수 있음을 알았다. 인공 결함을 가공한 탄소강 배관 시편을 방사선원 Ir-192로 방사선투과시험 한 뒤 농도 변화를 측정하고 이론적으로 계산한 농도 변화와 비교한 결과 산란 방사선에 의한 영향이 큰 가장자리를 제외한 부분에서는 농도 변화를 이용한 두께 평가가 가능함을 확인하였다.

• Biomolecules & Therapeutics
• /
• 제16권3호
• /
• pp.293-298
• /
• 2008

Cirsium japonicum water extracts has been used to treat vascular related diseases. We have previously reported that Cirsium japonicum extracts activated estrogen receptors. It is widely known that estrogen increases the high density lipoprotein cholesterol and decrease the low density lipoprotein cholesterol on the lipid profile. But effects of Cirsium japonicum on lipid profile are not reported yet. Therefore, we have studied the effects of Cirsium japonicum on the lipid content in ovariectomized rats. Thirty Sprague-Dawley (SD) rats of $210{\pm}20\;g$ were studied for 10 weeks. The rats were divided into five groups; (I) sham, no ovariectomized rats plus olive oil, (II) ovariectomized rats plus olive oil, (III) ovariectomized rats plus 0.5 mg/kg $17{\beta}$-estradiol (E2) in olive oil, (IV) ovariectomized rats plus 0.5 mg/kg Cirsium japonicum in olive oil, and (V) ovariectomized rats plus 5 mg/kg Cirsium japonicum in olive oil. Treatment with Cirsium japonicum or E2 induced significant reduction in total cholesterol, low density lipoprotein cholesterol/total cholesterol, total cholesterol/high density lipoprotein cholesterol and low density lipoprotein cholesterol/high density lipoprotein cholesterol compared to control group as well as increase in uterine weight. However, changes in triglycerides levels were different. Our results suggest that Cirsium japonicum is functionally similar to E2 in vivo as well as in vitro.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제53권3호
• /
• pp.157-161
• /
• 2004

We present a simple analytical expression of plasma density by making use of the electron density equation to study the dynamic behavior of the corona discharge plasma. It assumes that a specified voltage profile is fed through the inner conductor of the reactor chamber consisting of two coaxial conducting cylinders. The analytical description is based on the electron continuity equation with ionization and attachment by electrons. It is found that the electron density profile calculated between two coaxial cylindrical electrodes depends very sensitively on the Profile of applied voltage. The analytical expression of plasma density and its generation will provide important scaling laws in the corona discharge plasma.

• 한국추진공학회지
• /
• 제10권1호
• /
• pp.44-53
• /
• 2006

전산화 단층촬영법을 이용하여 탄소/탄소 목삽입재의 밀도 분포를 평가하였다. 전산화 단층촬영법의 Team hardening, 전기적 잡음 및 산란 X-ray의 영상을 보정하고 신호 대 잡음비를 높여 최적화할 때 측정된 탄소/탄소 복합재료의 밀도는 98.74%의 신뢰도 수준에서 ${\pm}0.01g/cm^3$ 분포를 갖는 것으로 평가되었다. 전산화 단층촬영 결과의 검증은 탄소/탄소 목삽입재를 절단하여 수침법에 의한 밀도 측정과 주사전자현미경 관찰을 통하여 수행되었으며 단층촬영 결과는 수침법에 의한 밀도 분포와 주사전자현미경의 영상과 일치하였다.

• Journal of the Korean Wood Science and Technology
• /
• 제51권2호
• /
• pp.98-108
• /
• 2023

In this study, the boards were manufactured according to the mandarin peels addition rate using sawdust and mandarin orange peel. After that, the mechanical properties and density profile of ceramics prepared by conditions through resin impregnation process and carbonization process were investigated. The bending and compression strengths of ceramics tended to increase as the resin impregnation rate increased. When the resin impregnation rate was 70%, the highest values were 8.58 MPa and 14.77 MPa, respectively. Also, the mechanical properties of ceramics according to carbonization temperature showed the highest values at 1,200℃ for bending strength of 11.09 MPa and compression strength of 17.20 MPa. The bending strength and compression strength according to the mandarin peels addition rate showed the highest values at 8.62 MPa and 14.16 MPa, respectively, when the mandarin orange peel addition rate was 5%. The mechanical properties tended to decrease when the addition rate of mandarin orange was increased. The density profile of ceramics showed a similar tendency to the mechanical properties. It can be seen that the density distribution from the surface layer to the center layer is more uniform as the resin impregnation rate and carbonization temperature increase and the mandarin peels addition rate decreases.

• 한국재료학회지
• /
• 제22권9호
• /
• pp.482-488
• /
• 2012

To fabricate a precise micro metal mold, the electrochemical etching process has been researched. We investigated the electrochemical etching process numerically and experimentally to determine the etching tendency of the process, focusing on the current density, which is a major parameter of the process. The finite element method, a kind of numerical analysis, was used to determine the current density distribution on the workpiece. Stainless steel(SS304) substrate with various sized square and circular array patterns as an anode and copper(Cu) plate as a cathode were used for the electrochemical experiments. A mixture of $H_2SO_4$, $H_3PO_4$, and DIW was used as an electrolyte. In this paper, comparison of the results from the experiment and the numerical simulation is presented, including the current density distribution and line profile from the simulation, and the etching profile and surface morphology from the experiment. Etching profile and surface morphology were characterized using a 3D-profiler and FE-SEM measurement. From a comparison of the data, it was confirmed that the current density distribution and the line profile of the simulation were similar to the surface morphology and the etching profile of the experiment, respectively. The current density is more concentrated at the vertex of the square pattern and circumference of the circular pattern. And, the depth of the etched area is proportional to the current density.