• 동아시아식생활학회지
• /
• 제9권1호
• /
• pp.64-73
• /
• 1999

The purpose of this study was to estimate the effect of serving sizes on dish wastes, nutrient intake, and diet satisfaction for reduction of dish waste products. The dish waste, energy and protein intake, and satisfaction scores before and after dining were compared in 44 subjects fed various serving sizes(100%, 90%, 80% of standard size) of 10 frequently consumed Korean dishes. The result are as follows: 1. Average age, height, and weight of 44 subjects were 30.5, 174.0cm, and 68.1kg in men and 26.2, 164.2cm, and 53.5kg in women, respectively. 2. There was a significant difference in the dish waste rate of 10 Korean dishes to serving sizes. The range of dish waste rates of 10 Korean dishes was 13.14-33.04%. 3. The average energy intake from 10 Korean dishes in which 100% of the standard serving size was served was lower than Korean RDA. Protein intakes from Sulungtang, Yukgaejang, Deunjang-ggigae, and Bibimpab with 100% servins size, Soondubi-ggigae 90% servins size, and Galbitang, Bulgogi-bakpan, Sangsungui-bakpan, Bakpan 80% of standard serving size were higher than Korean RDA. 4. The satisfaction score before dining on Sulungtang, Bulgogi-bakpan, Sangsungui-bakpan decreased with decreasing serving size. However, there was no significant difference in satisfaction score after dining to serving size. These findings indicate that dish waste rate and diet satisfaction of 10 these Korean dishes are fixed and energy intake is insufficient. Therefore, for reduction of food waste and reasonable serving size of dishes evaluated in this study, there should be more studies about Korean menu development with decreasing serving size and increasing energy density.

• Structural Engineering and Mechanics
• /
• 제62권4호
• /
• pp.507-517
• /
• 2017

Due to the discontinuous nature of uncertainty quantification in conventional evidence theory(ET), the computational cost of reliability analysis based on ET model is very high. A novel ET model based on fuzzy distribution and the corresponding combination rule to synthesize the judgments of experts are put forward in this paper. The intersection and union of membership functions are defined as belief and plausible membership function respectively, and the Murfhy's average combination rule is adopted to combine the basic probability assignment for focal elements. Then the combined membership functions are transformed to the equivalent probability density function by a normalizing factor. Finally, a reliability analysis procedure for structures with the mixture of epistemic and aleatory uncertainties is presented, in which the equivalent normalization method is adopted to solve the upper and lower bound of reliability. The effectiveness of the procedure is demonstrated by a numerical example and an engineering example. The results also show that the reliability interval calculated by the suggested method is almost identical to that solved by conventional method. Moreover, the results indicate that the computational cost of the suggested procedure is much less than that of conventional method. The suggested ET model provides a new way to flexibly represent epistemic uncertainty, and provides an efficiency method to estimate the reliability of structures with the mixture of epistemic and aleatory uncertainties.

• 대한기계학회논문집A
• /
• 제34권11호
• /
• pp.1705-1713
• /
• 2010

피로시험의 결과가 큰 편차를 보이는 하이브리드 복합재 조인트부에 대해서 통계적 피로수명 평가법을 이용하여 신뢰도 높은 피로수명을 추정하고자 한다. 저상버스 차체에 사용되는 하이브리드 복합재 조인트부를 절취하여 시험대상으로 하였으며, 이 조인트 시편으로 외팔보형 피로굽힘시험을 수행하였다. 피로시험 데이터를 정규분포, 대수정규분포, 와이블 분포를 이용하여 근접시킨 피로수명 곡선들과 각각 비교함으로써 하이브리드 복합재 조인트부의 내구수명 추정에 가장 적합한 확률분포를 선정하였다. 선정된 와이블 확률분포를 이용해 확률-응력-수명(P-S-N) 곡선을 구함으로써 하이브리드 복합재 조인트부에 대한 통계적 수명예측 평가절차와 신뢰성설계의 기초자료를 제시하였다.

• 한국태양에너지학회 논문집
• /
• 제38권2호
• /
• pp.45-53
• /
• 2018

For the preliminary step for estimating the performance of roof-type photovoltaic system in urban areas, we analyzed the solar radiation reduction ratio by shadow effect by buildings using DSM (Digital Surface Model) and GIS (Geographical Information System) tools. An average loss by the shadow is about 19% in Seoul. The result was related to the building density and distribution. Monthly results show that the winter season (December and January) was more affected by the shading than during the summer season (June and July). It is expected that useful empirical formulas can be made if more detailed correlation studies are performed.

• 대한영양사협회학술지
• /
• 제14권4호
• /
• pp.337-350
• /
• 2008

The principal objective of this study was to assess the nutritional status and dietary quality in low-income elderly individuals residing at home (LH) or in health care facilities (LHCF) with dietitian. This study was conducted via anthropometric measurements, questionnaire interviews, and dietary surveys using a 24 hr recall method with 120 low-income elderly individuals (LHCF=46, LH=74). The average ages of the LH and LHCF group were 76.3 years and 78.6 years, respectively. The LH group evidenced a significantly higher frequency of skipping meals than the LHCF group. The average energy intakes of the LHCF and LH group were 1921.0 kcal and 1443.9 kcal, with a significant difference (p<0.001). Most of the nutrient intake and intake rates for recommended intake were significantly higher among the LHCF group as compared with the LH group. The LHCF group showed significantly higher values for the nutrient adequacy ratio (NAR), the mean adequacy ratio (MAR), nutrient density (ND), and the index of nutritional quality (INQ) by dietary qualitative estimation than in the LH group. The Korean diet diversity scores (KDDS) were 3.66 for LH group and 4.93 for the LHCF group, thus were significantly higher in the LHCF group than in the LH group. The results of the present study demonstrate that the LH group appeared to experience more dietary problems than the LHCF group. It was suggested that nutritional education is needed for low-income elderly individuals living at home, in order for them to learn proper dietary management. This can be achieved via educational programs in social welfare institutions, incentives toward employment as a dietitian, and implementation of community-based support.

• 한국화재소방학회논문지
• /
• 제27권4호
• /
• pp.41-46
• /
• 2013

본 연구는 가구류를 구성하는 주요 재료의 열적조건에 따른 반응특성과 화염전파해석에 필요한 열해리 물성을 제공하기 위해 열중량분석을 수행하였다. 실험대상 시편은 가구류에 널리 적용되는 MDF 판재와 코팅재, 합성피혁과 쿠션재 등이며 가열율 $10^{\circ}C/min$, 최대 온도 $600^{\circ}C$까지 실험을 수행하였다. 실험결과 MDF 소재의 경우 $324^{\circ}C$에서 피크 반응을 나타냈었으며 MDF 코팅재의 경우 초기 피크반응온도가 $270{\sim}280^{\circ}C$로 감소하였다. 합성피혁과 폼 소재의 경우 재료를 구성하는 폴리머의 종류에 따라 기준온도와 기준 반응율이 차이를 보였으나 기준온도는 $270^{\circ}C$와 $420^{\circ}C$ 정도로 비교적 유사한 경향을 나타냈다. Lyon 등이 제시한 방법에 의해 반응상수와 활성화 에너지를 산정하기 위해 시편의 기준 온도와 기준 반응율을 제시하였으며 이러한 기초 물성연구를 통해 화염전파특성을 이해함과 동시에 화재해석의 신뢰성을 향상시키는데 기여하고자 한다.

• 한국융합학회논문지
• /
• 제8권6호
• /
• pp.9-16
• /
• 2017

Li-Po 에너지 밀도의 기술적 진보의 한계로 회전익 무인항공기의 비행시간은 제한적이기 때문에, 연구원들은 회전익 무인항공기의 완전한 자율 임무 수행을 위하여 우회 해결책을 찾고 있다. 몇 가지 후보 해결책들 중, 자동 무선 충전이 가장 가능성 있고 현실적인 후보이며, 본 논문에서는 자동 무선 충전의 주요 기술인 자동 착륙 전략에 초점을 맞추고 있다. MATLAB/Simulink를 기반으로 Li-Po 배터리팩 시뮬레이터를 포함한 회전익 무인항공기 비행 시뮬레이터를 개발하였으며, 이를 통해 비행 상태 및 배터리팩 상태를 분석하였다. 이륙할 때 1,647 W의 최대 모터 출력이 발생하였고, 이때 셀 전압은 최소 3.39 V까지 감소하였다. 이는 22 Ah를 지니고 12S1P로 연결된 2개의 배터리팩이 자동 착륙 임무수행에 적합하다는 것을 나타낸다.

• International Journal of Fluid Machinery and Systems
• /
• 제9권1호
• /
• pp.66-74
• /
• 2016

Concerning the numerical simulation of high-speed water jet with intensive cavitation this paper presents a practical compressible mixture flow method by coupling a simplified estimation of bubble cavitation and a compressible mixture flow computation. The mean flow of two-phase mixture is calculated by URANS for compressible fluid. The intensity of cavitation in a local field is evaluated by the volume fraction of gas phase varying with the mean flow, and the effect of cavitation on the flow turbulence is considered by applying a density correction to the evaluation of eddy viscosity. High-speed submerged water jets issuing from a sheathed sharp-edge orifice nozzle are treated when the cavitation number, ${\sigma}=0.1$, and the computation result is compared with experimental data The result reveals that cavitation occurs initially at the entrance of orifice and bubble cloud develops gradually while flowing downstream along the shear layer. Developed bubble cloud breaks up and then sheds downstream periodically near the sheath exit. The pattern of cavitation cloud shedding evaluated by simulation agrees experimental one, and the possibility to capture the unsteadily shedding of cavitation clouds is demonstrated. The decay of core velocity in cavitating jet is delayed greatly compared to that in no-activation jet, and the effect of the nozzle sheath is demonstrated.

• Smart Structures and Systems
• /
• 제20권6호
• /
• pp.769-780
• /
• 2017

Cable force monitoring is an essential and critical part of the safety evaluation of cable-supported bridges. A reasonable cable force monitoring scheme, particularly, sensor placement related to accurate safety assessment and budget cost-saving becomes a major concern of bridge administrative authorities. This paper presents optimal sensor placement for cable force monitoring by selecting representative sensor positions, which consider the spatial correlativeness existing in the cable group. The limited sensors would be utilized for maximizing useful information from the monitored bridges. The maximum information coefficient (MIC), mutual information (MI) based kernel density estimation, as well as Pearson coefficients, were all employed to detect potential spatial correlation in the cable group. Compared with the Pearson coefficient and MIC, the mutual information is more suitable for identifying the association existing in cable group and thus, is selected to describe the spatial relevance in this study. Then, the bond energy algorithm, which collects clusters based on the relationship of surrounding elements, is used for the optimal placement of cable sensors. Several optimal placement strategies are discussed with different correlation thresholds for the cable group of Nanjing No.3 Yangtze River Bridge, verifying the effectiveness of the proposed method.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2006년도 International Symposium on GPS/GNSS Vol.2
• /
• pp.235-240
• /
• 2006

Ionospheric scintillation induces a rapid change in the amplitude and phase of radio wave signals. This is due to irregularities of electron density in the F-region of the ionosphere. It reduces the accuracy of both pseudorange and carrier phase measurements in GPS/satellite based Augmentation system (SBAS) receivers, and can cause loss of lock on the satellite signal. Scintillation is not as strong at mid-latitude regions such that positioning is not affected as much. Severe effects of scintillation occur mainly in a band approximately 20 degrees on either side of the magnetic equator and sometimes in the polar and auroral regions. Most scintillation occurs for a few hours after sunset during the peak years of the solar cycle. This paper focuses on estimation of the effects of ionospheric scintillation on GPS and SBAS signals using a software receiver. Software receivers have the advantage of flexibility over conventional receivers in examining performance. PC based receivers are especially effective in studying errors such as multipath and ionospheric scintillation. This is because it is possible to analyze IF signal data stored in host PC by the various processing algorithms. A L1 C/A software GPS receiver was developed consisting of a RF front-end module and a signal processing program on the PC. The RF front-end module consists of a down converter and a general purpose device for acquiring data. The signal processing program written in MATLAB implements signal acquisition, tracking, and pseudorange measurements. The receiver achieves standalone positioning with accuracy between 5 and 10 meters in 2drms. Typical phase locked loop (PLL) designs of GPS/SBAS receivers enable them to handle moderate amounts of scintillation. So the effects of ionospheric scintillation was estimated on the performance of GPS L1 C/A and SBAS receivers in terms of degradation of PLL accuracy considering the effect of various noise sources such as thermal noise jitter, ionospheric phase jitter and dynamic stress error.