• 제목/요약/키워드: Density dependency

검색결과 105건 처리시간 0.022초

설문에 의한 도시가스 사용가구의 안전의식도 조사 (An attitude survey on the safety of the household utilities with the urban gas)

  • 고재선;김효;이수경
    • 한국가스학회:학술대회논문집
    • /
    • 한국가스학회 2005년도 추계학술발표회 논문집
    • /
    • pp.37-43
    • /
    • 2005
  • 도시가스를 사용하고 있는 사용가구에 대한 설문조사 결과 10가구 당 7가구 꼴로 도시가스가 안전한 것으로 인식하고 있지만 이 중 $30\%$는 향후 가스 안전사고가 자신의 집에서 발생할 가능성이 있다고 인식하고 있어 도시가스이용이 상대적으로 안전하기는 하지만 여전히 사고의 위험성이 상존하고 있다는 것을 도시가스를 사용하는 가구 구성원들이 인식하고 있는 것으로 나타났다. 이러한 도시가스 소비자의 가스안전에 대한 인식은 연령, 성별, 소득수준 등과는 무관한 것으로 분석된 반면, 고학력자이며, 직, 간접적인 가스안전사고 경험이 있고, 가스안전점검요령을 미숙지하고 있는 사람일수록 도시가스사용의 안전성에 대한 인식이 상대적으로 낮게 나타났다. 한편, 대다수의 도시가스사용가구가 최소한의 가스안전점검방법을 알고 있는 반면, 단지 $60\%$만이 자율점검을 실시하고 있는 것으로 나타나 소비자가 자율적인 안전점검에 대해 매우 소홀히 하고 있음을 알 수 있다. 특히 자율점검을 실시하지 않는 이유로 대다수의 응답자가 "외부로부터 안전점검을 받기 때문에 자율점검의 필요성을 못느끼고 있다"라고 응답한 점을 감안할 때 소비자들의 외부에 대한 안전점검의 의존성향을 변화시키기 위해서는 도시가스사 직원의 정기 안전검사시 안전점검 외에도 자율점검의 필요성 및 방법 등에 대한 올바른 교육 및 적극적인 홍보활동이 필요하다.

  • PDF

동결토의 압축강도에 관한 실험적 연구 (Experimental Studies on the Compressive Strength of the Frozen Soils)

  • 유능환;최중돈;유영선;조영택
    • 한국농공학회지
    • /
    • 제35권4호
    • /
    • pp.55-66
    • /
    • 1993
  • Upon freezing a soil swells due to phase change and its compression stress increase a lot. As the soil undergo thawing, however, it becomes a soft soil layer because the 'soil changes from a solid state to a plastic state. These changes are largely dependent on freezing temperature and repeated freezing-thawing cycle as well as the density of the soil and applied loading condition. This study was initiated to describe the effect of the freezing temperature and repeated freezing-thawing cycle on the unconfined compressive strength. Soil samples were collected at about 20 sites where soil structures were installed in Kangwon provincial area and necessary laboratory tests were conducted. The results could be used to help manage effectively the field structures and can be used as a basic data for designing and constructing new projects in the future. The results were as follows ; 1. Unconfined compressive strength decreased as the number of freezing and thawing cycle went up. But the strength increased as compression speed, water content and temperature decreased. The largest effect on the strength was observed at the first freezing and thawing cycle. 2. Compression strain went up with the increase of deformation speed, and was largely influenced by the number of the freezing-thawing cycle. 3. Secant modulus was responded sensitivefy to the material of the loading plates, increased with decrease of temperature down to - -10$^{\circ}$C, but was nearly constant below the temperature. Thixotropic ratio characteristic became large as compression strain got smaller and was significantly larger in the controlled soil than in the soil treated with freezing and thawing processes 4. Vertical compression strength of ice crystal(development direction) was 3 to 4 times larger than that of perpendicular to the crystal. The vertical compression strength was agreed well with Clausius-Clapeyrons equation when temperature were between 0 to 5C$^{\circ}$, but the strength below - 5$^{\circ}$C were different from the equation and showed a strong dependency on temperature and deformation speed. When the skew was less then 20 degrees, the vertical compression strength was gradually decreased but when the skew was higher than that, the strength became nearly constant. Almost all samples showed ductile failure. As considered above, strength reduction of the soil due to cyclic freezing-thawing prosses must be considered when trenching and cutting the soil to construct soil structures if the soil is likely subject to the processes. Especially, if a soil no freezing-thawing history, cares for the strength reduction must be given before any design or construction works begin. It is suggested that special design and construction techniques for the strength reduction be developed.

  • PDF

고분자 물질로 지지된 크라운 에테르류(II) 상이동 촉매 효능 (Polymer-Supported Crown Ethers (II). Efficiency for Phase Transfer Catalyst)

  • 심재후;정광보;장승현;송대경;성용길
    • 대한화학회지
    • /
    • 제32권6호
    • /
    • pp.593-602
    • /
    • 1988
  • 크라운 에테르를 반복 사용 기능의 상이동 촉매(phase transfer catalyst ; PTC)로 유도하기 위해 고분자 물질로 지지된 크라운 에테르(polymer-supported crown ether ; Ps-CE)류를 합성하고, 이들 Ps-CE(solid phase)를 이용하여 액-고-액 3상 불균일계에서의 1-bromooctane(유기층)의 iodide(수용층) 친핵 치환 반응속도를 측정하고 그 상이동 촉매능을 연구검토하였다. Ps-CE류는 hydroxymethyl기를 지니는 크라운 에테르류를 합성한 후 이를 1∼2% cross-linked chloromethylated polystyrene 에그라프트시켜 제조하였다. 3상 불균일계치환반응은 반응기질의 농도에 의존하는 유사 일차반응이었고 반응속도상수$(k_{obsd})$는 사용한 촉매량에 비례하였으며, 가교밀도, 온도, 용매 등에 영향을 받음을 알 수 있었다. Ps-CE의 촉매능을 구조적으로 유사한 가용성 크라운 에테르의 촉매능과 비교하였으며, 반응 후 단순히 여과분리하고 이를 PTC로서 반복사용하였을때 촉매능의 감소없이 재사용이 가능함을 알 수 있었다. 반응의 활성화 엔탈피 및 엔트로피는 각각 10∼20kcal $mol^{-1}, 20~55eu.이었고 활성화 자유 에너지는 ∼30kcal mol^{-1}$,/TEX>이었다.

  • PDF

인공위성 해수면온도 3-D 최적 내삽 합성장 생산 방법과 한계점 (A Methodology for 3-D Optimally-Interpolated Satellite Sea Surface Temperature Field and Limitation)

  • 박경애;김영호
    • 한국지구과학회지
    • /
    • 제30권2호
    • /
    • pp.223-233
    • /
    • 2009
  • AQUA/AMSR-E 인공위성 자료를 활용하여 3차원 최적내삽 해수면온도 합성장을 생산하였고 시간평균장과 비교하여 문제점과 한계점을 기술하였다. 3-D SST 합성장은 북태평양 중앙부에서 전체적으로 $0.05^{\circ}C$ 이하의 작은 오차를 보였으나, 위성 결측이 있는 연안에서는 $0.4^{\circ}C$ 이상의 비교적 큰 오차를 유발하였다. 강한 강수나 구름으로 인한 결측이 있는 부분에서는 $0.1-0.15^{\circ}C$에 달하는 오차를 보였다. 시간평균장과 비교한 결과, 구름 부근의 화소에서는 해수면온도를 낮게 계산하는 경향이 있었으며, 해수면온도의 공간적 구배를 감소시키는 평활화가 전체적으로 나타났다. 적도 부근 저위도에서 OI SST는 실제 해수면온도에는 없는 불연속성을 만드는 경향이 있었고, 이는 OI 과정에서 사용한 윈도우의 크기와 해양 현상의 수평 규모가 위도에 따라 변화하는데서 기인하였다. 현상의 공간 규모의 척도인 로스비 내부변형 반경은 북태평양에서 O(1) 정도로 위도에 따른 공간적 변화가 큰 것으로 나타났다. 본 연구는 SST합성장 생산과정에 위도와 해수의 수직적 밀도 구조와 밀접한 관련이 있는 해양 현상의 수평적 규모의 시공간적 변동 특성을 고려해야 함을 제시한다.

CycleGan 딥러닝기반 인공CT영상 생성성능에 대한 입력 MR영상의 T1 및 T2 가중방식의 영향 (Dependency of Generator Performance on T1 and T2 weights of the Input MR Images in developing a CycleGan based CT image generator from MR images)

  • 이사무엘;정종훈;김진영;이연수
    • 한국방사선학회논문지
    • /
    • 제18권1호
    • /
    • pp.37-44
    • /
    • 2024
  • MR은 우수한 연조직 대비와 기능 정보를 보여줄 수 있지만, 방사선치료에서 정확한 선량 계산을 위해서는 CT영상의 전자밀도 정보가 필요하다. 방사선치료(Radiotherapy) 계획 워크플로우에서 MR영상과 CT영상을 융합하기 위해 환자는 일반적으로 MR과 CT영상 방식 모두에서 스캔된다. 최근에 딥러닝기술 덕분에 MR영상에서 딥러닝 기반의 CT영상 생성이 가능해졌다. 이로 인해 CT 스캔 작업을 할 필요가 없게 된다. 본 연구에서는 MR영상으로부터 CycleGan 딥러닝 기반 CT영상생성을 구현했다. T1가중이나 T2가중 중에 한 가지 또는 그 둘다의 MR영상을 가지고 합습한 3가지의 인공지능 CT생성기를 만들었다. 결과에서 우리는 T1가중 MR 영상 기반으로 학습한 생성기가 T1가중 MR영상이 입력될 때 다른 CT생성기보다 더 나은 결과를 생성할 수 있음을 발견했다. 반면, T2가중 MR영상 기반 CT생성기는 T2가중 MR영상을 입력 받을 때, 다른 시퀀스기반 CT생성기보다 더 나은 결과를 생성할 수 있습니다. MR영상을 기반으로 한 CT생성기는 곧 임상현장에 적용될 수 있는 기술이다. 특정 시퀀스 MR영상으로 학습한 머신러닝 CT생성기는 다른 시퀀스 MR영상으로 학습한 생성기보다 더 그 특정 시퀀스와 같은 MR영상을 입력받을 때 더 나은 CT영상을 생성할 수 있음을 보여주었다.