• 천문학회지
• /
• 제29권spc1호
• /
• pp.139-140
• /
• 1996

• 천문학회보
• /
• 제38권2호
• /
• pp.78.1-78.1
• /
• 2013

The hierarchical model of galaxy formation predicts that galaxy halos contain merger relics in the form of long stellar stream. Thus, tidal substructure of stars around globular clusters, such as tidal tails, could be an essential evidence of the merging scenario in the formation of the Galaxy. From April 2010 to December 2012, we obtained $45^{\prime}{\times}45^{\prime}$ wide-field JHKs near-infrared photometric imaging data for about 20 globular clusters in the Milky Way, and examined the stellar density distribution around globular clusters. Here, we introduce the preliminary results of stellar spatial distributions and radial surface density profiles of four globular clusters. In order to minimize the field star contamination and identify the cluster's member candidates stars, we used a statistical filtering algorithm and gave weights on the CMDs of globular clusters. In two-dimensional stellar density maps, we could found tidal stripping structures for some globular clusters. The orientation of tidal substructure seems to associate with the effects of dynamical interactions with the Galaxy and cluster's orbit. Indeed, the radial surface density profile accurately describes this stripping structures as a break in the slope of profile. The observational results could give us further observational evidence of merging scenario of the formation of the Galaxy.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.213-213
• /
• 2010

Magnetic random access memory (MRAM), based on magnetic tunnel junction (MTJ) and CMOS, is one of the best semiconductor memories because it can provide nonvolatility, fast access time, unlimited read/write endurance, low operating voltage and high storage density. For the realization of high density MRAM, the etching of MTJ stack with good properties is one of a key process. Recently, there has been great interest in the MTJ stack using MgO as barrier layer for its huge room temperature MR ratio. The use of MgO barrier layer will undoubtedly accelerate the development of MTJ stack for MRAM. In this study, high-density plasma reactive ion etching of MgO films was investigated in an inductively coupled plasma of $Cl_2$/Ar gas mixes. The etch rate, etch selectivity and etch profile of this magnetic film were examined on vary gas concentration. As the $Cl_2$ gas concentration increased, the etch rate of MgO monotonously decreased and etch slop was slanted. The effective of etch parameters including coil rf power, dc-bais voltage, and gas pressure on the etch profile of MgO thin film was explored, At high coil rf power, high dc-bais voltage, low gas pressure, the etching of MgO displayed better etch profiles. Finally, the clean and vertical etch sidewall of MgO films was achieved using $Cl_2$/Ar plasma at the optimized etch conditions.

• Nuclear Engineering and Technology
• /
• 제53권11호
• /
• pp.3528-3542
• /
• 2021

A detailed geometrical model of a Krško reactor core was developed using a Monte Carlo neutron transport code MCNP. The main goal of developing an MCNP core model is for it to be used in future research focused on ex-core calculations. A script called McCord was developed to generate MCNP input for an arbitrary fuel cycle configuration from the diffusion based core design package CORD-2, taking advantage of already available material and temperature data obtained in the nuclear core design process. The core model was used to calculate 3D power density profile inside the core. The applicability of the calculated power density distributions was tested by comparison to the CORD-2 calculations, which is regularly used for the nuclear core design calculation verification of the Krško core. For the hot zero power and hot full power states differences between MCNP and CORD-2 in the radial power density profile were <3%. When studying axial power density profiles the differences in axial offset were less than 2.3% for hot full power condition. To further confirm the applicability of the developed model, the measurements with in-core neutron detectors were compared to the calculations, where differences of 5% were observed.

• International journal of advanced smart convergence
• /
• 제11권3호
• /
• pp.170-178
• /
• 2022

Purpose: Gardening has been reported to have positive emotional and physical effects in older adults. However, limited studies have assessed this relationship in Korea. Therefore, in this pilot study of densely populated urban dwellers, we aimed to investigate whether temporary but repeated experiences of the natural environment could positively change metabolism-related blood indicators. Methods: This study used pre- and post-interventional designs to investigate the effects of 16 weeks of gardening on lipid profiles in an urban adult population and investigate their relationships. This study was conducted 30 times at the H Botanical Garden in Yongin City from August 16, 2021 to November 30, 2021 (16 weeks, twice a week, 3 hours each time). Before and after the gardening program, a clinical pathologist collected blood samples from the participants. Results: High-density lipoprotein levels increased, low-density lipoprotein levels decreased, and total cholesterol levels decreased after the gardening activity. Conclusions: Our findings suggest that gardening has potential for clinical application as it has good control over the lipid profile through physical activity. These findings can be used as basic data for studying the relationship between urban populations and their living environment and for various studies in the future as experiencing the natural environment provides many health benefits.

• Journal of the Korean Wood Science and Technology
• /
• 제30권2호
• /
• pp.158-164
• /
• 2002

우드세라믹의 성질에 영향을 미치는 보드의 수지 함침율과 밀도경사의 특성을 알아보기 위하여 증기 처리를 하지 않은 보드와 증기 처리를 1, 5, 10분 실시한 보드를 석탄산수지로 함침한 후 증기분사 시간의 영향을 조사하였다. 증기처리를 하지 않은 보드의 중층과 표층의 밀도 비가 가장 컸으며, 수지 함침율, 길이 및 두께 증가율은 밀도가 증가함에 따라 감소하였다. 또한 등기처리를 10분 실시한 보드의 수지 함침율, 길이 및 두께 증가율이 가장 컸다.

• 방사선산업학회지
• /
• 제7권2_3호
• /
• pp.115-119
• /
• 2013

The density profile measurement technology by gamma transmission has been widely used to diagnose processes in the field of refinery and petrochemical industry. This technology can reveal a clue and position of abnormal phenomenon of industrial processes during their operation. In this paper, the feasibility of the gamma transmission technology for detecting changes in the amount of fluid in a distillation column was evaluated by using Monte Carlo simulations. The simulations assumed that $^{60}Co$ (1.17, 1.33 MeV) sources and NaI (Tl) detectors (${\Phi}5{\times}5cm$) are located in opposite sides of a column and it concurrently moves in vertical direction. To determine the dependency of a spatial resolution on aperture size of a collimator, the simulation model for a tray in a column were simulated with the aperture sizes of 1 and 2 cm. The thickness of the high density area including a tray and fluid was 7.6 cm in the simulation. The spatial resolution of the tray was 8.2 and 8.5 cm, respectively. As a result, it was revealed that the conventional density profile measurement technique is not able to show the deviation of liquid level on a tray in a column.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제54권8호
• /
• pp.365-370
• /
• 2005

Microwave diagnostics have been widely utilized to measure the important parameters of high temperature and high density plasmas. Reflectometry is known as a promising microwave diagnostic which has a number of merits to measure electron density profiles. In the KSTAR device, X-mode FM reflectometry is planned to measure the plasma density profiles. FM reflectometry is required to extract phase information on raw mixer IF signals, thereby obtaining time-of-flight of reflectometry signals. It is known that the data analysis method is crucial to determine the performance of FM reflectometry In fact, there are several analysis programs which have been utilized in various FM systems. Since each program was developed for a specific device, however, it is difficult to directly apply it to a different reactor like the KSTAR device. It is necessary, therefore, to develop a data analysis program for the KSTAR FM reflectometry. In this paper, complex digital demodulation (CDM) and wavelet transformation are examined in terms of the performance of density profile reconstruction. For the comparison of both methods, FM reflectometry signals are generated on the basis of assumed profiles and the interaction of the X-mode wave and the plasma. In order to see how well both methods work under various conditions, three types of profiles are assumed and noise effects are included. As a result, both methods work well under the condition of gentle density gradient and small noise level. As density gradient becomes steeper and noise level gets higher. the reconstruction performance of wavelet is better than that of CDM.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.475-475
• /
• 2010

We have generated Ar plasma in dense plasma focus device with coaxial electrodes for extreme ultraviolet (EUV) lithography and investigated an emitted visible light for electro-optical plasma diagnostics. We have applied an input voltage 4.5 kV to the capacitor bank of 1.53 uF and the diode chamber has been filled with Ar gas of pressure 8 mTorr. The inner surface of the cylindrical cathode has been attatched by an acetal insulator. Also, the anode made of tin metal. If we assumed that the focused plasma regions satisfy the local thermodynamic equilibrium (LTE) conditions, the electron temperature and density of the coaxial plasma focus could be obtained by Stark broadening of optical emission spectroscopy (OES). The Lorentzian profile for emission lines of Ar I of 426.629 nm and Ar II of 487.99 nm were measured with a visible monochromator. And the electron density has been estimated by FWHM (Full Width Half Maximum) of its profile. To find the exact value of FWHM, we observed the instrument line broadening of the monochromator with a Hg-Ar reference lamp. The electron temperature has been calculated using the two relative electron density ratios of the Stark profiles. In case of electron density, it has been observed by the Stark broadening method. This experiment result shows the temporal behavior of the electron temperature and density characteristics for the focused plasma. The EUV emission signal whose wavelength is about 6 ~ 16 nm has been detected by using a photo-detector (AXUV-100 Zr/C, IRD). The result compared the electron temperature and density with the temporal EUV signal. The electron density and temperature were observed to be $10^{16}\;cm^{-3}$ and 20 ~ 30 eV, respectively.

• Clinical Nutrition Research
• /
• 제12권4호
• /
• pp.257-268
• /
• 2023

Migraine is a common neurological disease correlated with oxidative stress and lipid profile disorders. The present study was designed to determine the effects of Coenzyme Q10 (Co-Q10) supplementation on oxidative status and lipid profile in migraine individuals. This clinical trial was conducted on 84 females aged 18-50 years, diagnosed for episodic migraine according to the International Headache Society. Subjects were randomized to receive either Co-Q10 supplement (400 mg/day) or placebo for 12 weeks. Lipid profile and oxidative stress indices including malondialdehyde (MDA) and total antioxidant capacity (TAC) were measured before and after intervention in both groups. Also, anthropometric indices, dietary intakes, and clinical features were collected. Data analysis was conducted using SPSS version 16. Seventy-seven of the participants, with mean age of 33.70 ± 7.75 years, completed the study. After 12-week intervention, Co-Q10 led to a significant decrease in MDA levels compared to placebo (p = 0.009), with no effect on TAC levels (p = 0.106). A significant increase in serum Co-Q10 concentration and high-density lipoprotein cholesterol (HDL-C) level in Co-Q10 group was observed, but no significant differences were found in other lipid profile variables (low-density lipoprotein cholesterol, triglycerides and total cholesterol). Among anthropometric variables, Co-Q10 only caused a significant reduction in body fat percentage (BFP), but we did not find any significant changes in others. A 12-week Co-Q10 supplementation led to significant improvement in clinical features, BFP, and HDL-C level among migraine individuals.