• 한국산림과학회지
• /
• 제112권2호
• /
• pp.188-194
• /
• 2023

본 연구는 우리나라의 대나무림에 대한 탄소계정을 위하여 탄소배출계수 중 하나인 목재기본밀도를 도출하기 위하여 수행되어 졌다. 대나무는 전라남도와 경상남도에 주로 분포해 있으며, 계수 도출을 위한 표준목은 솜대, 왕대, 맹종죽 등 3수종별로 각각 101본씩을 선정하여 활용하였다. 목재기본밀도 도출은 KS F 2098 방법을 따랐다. 측정결과, 솜대의 목재기본밀도는 0.83 g/cm³, 왕대는 0.81 g/cm³, 맹종죽은 0.72 g/cm³로 각각 나타났다. 그렇지만, 우리나라는 대나무 분포 면적이 많지 않고, 맹종죽의 경우 일정 지역에 국한되어 생육하고 있다. 따라서 대나무에 적용할 수 있는 목재기본밀도는 하나로 통합하여 0.79 g/cm³로 확정하였다. 그리고 도출된 목재기본밀도에 대한 불확도를 평가한 결과, 1.61%로 낮은 불확도 값을 가져, 본 분석에서의 측정값에 대한 신뢰도를 확인할 수 있었다. 본 연구에서는 이번에 개발한 목재기본밀도와 기존의 바이오매스확장계수, 뿌리함량비 등을 이용하여 대나무 표준목에 대한 탄소저장량을 계산하고, 이를 확장시켜 ha단위까지 계산해 보았다. 이번 연구로 대나무의 재적을 이용하여 목재기본밀도 등 탄소배출계수 적용으로 탄소저장 및 흡수량 계산이 가능하게 되었다. 본 결과가 우리나라 탄소중립 정책 및 산림관리 방향에 도움이 되기를 기대한다.

• 한국의류학회지
• /
• 제34권11호
• /
• pp.1798-1811
• /
• 2010

This research evaluates the changes in the comfort-related properties of high-density fabric, such as moisture permeability and waterproofness, in order to assess the relative importance of laundry conditions for clothing properties after repeated laundering and suggest the best laundering conditions for high-density fabric through the identification of the most influential factor. A commercial high-density fabric was washed 25 times in a drum-type washer using nine different laundry conditions based on profiles derived from a fractional factorial design. To evaluate the changes in the comfort-related properties of the fabric, pore size, air permeability, water vapor transport, water repellency, and water resistance were measured. The comfort-related properties of the fabric deteriorated after repeated laundering by the damaged surface finish; in addition, the damaged surface also changed the pore size. As a result, the water repellency and water resistance decreased. The detergent was the most responsible factor to change the properties among the four factors of detergent, hardness, temperature, and RPM. The best laundering conditions for the fabric was a neutral detergent, soft water of 70ppm, a temperature of $15^{\circ}C$, and 30rpm.

• 전기전자학회논문지
• /
• 제21권2호
• /
• pp.123-129
• /
• 2017

고분자 막 연료전지는 높은 전력밀도, 낮은 배출 및 낮은 동작온도 때문에 미래 자동차 및 전력생산의 강력한 보류이다. FEMFC 내부의 기체확산층(GDL)의 중요한 관심은 물의 조절이다. GDL은 소수성 PTFE와 전기전도성을 위해서 탄소로 보통 구성되어 있다. 이 시뮬레이션에서 GDL 흐름은 확립된 방정식 모델의 단순화된 접근법으로 조사되었다. GDL의 성능은 모델 방정식을 이용하여 전지의 내부열, 수증기 밀도 와 산소밀도의 결과를 보였다. FEMFC 촉매층 모델은 유효인자, Butler-volmer 와 수소유동 밀도의 결과를 나타냈다. 이 결과들은 몇 가지 요소들과 함께 영향의 차이는 흥미 가지게 되며 정보는 연료전지를 설계하는데 도움을 줄 것이다.

• 한국조경학회지
• /
• 제35권4호
• /
• pp.40-47
• /
• 2007

The objective of this study is to analyze the propriety of the Biotope Area Factor's(BAF) application and propose an improvement plan. The BAP system, initially started by Seoul metropolitan city, is being settled in Korea. The BAF originated from the Biotop $Fl{\ddot{a}}chen$ Faktor(BFF) system of Berlin Germany. It was established as part of the Landscape Plan for the ecological function recovery in the high density built-up area with a sense of environmentally friendly urban management. The study compared the BAF's present condition of Ganddong-Gu, Seoul with Seoul's BAF system. Some problems appeared from the system application. Firstly, it may cause ecological damage if the site ranges are more than current BAF system limits. Secondly, the application of the current BAF system has the possibility of general redevelopment, but the partial improvement considering current standards of the high density built-up area's paving section is impossible. Lastly, division of the application object and application type are not divided well. In addition, the Seoul BAF which is currently applied across the board is based on the destruction of the natural area and low density built-up area. Accordingly, to improve these problems requires a complementary system protecting the ecological function prior to the application of the BAF and with restricted application to high density of BAF system built-up area.

• Journal of Electrical Engineering and Technology
• /
• 제11권4호
• /
• pp.939-942
• /
• 2016

One of the most important characteristic curves of a solar cell is its current density-voltage (J-V) curve under AM1.5G insolation. Solar cell can be considered as a semiconductor diode, so a diode equivalent model was used to estimate its parameters from the J-V curve by numerical simulation. Active layer plays an important role in operation of a solar cell. We investigated the effect thicknesses and defect densities (N_d) of the active layer on the J-V curve. When the active layer thickness was varied (for N_d = 8×10¹⁷ cm^-3) from 800 nm to 100 nm, the reverse saturation current density (J_o) changed from 3.56×10^-5 A/cm² to 9.62×10^-11 A/cm² and its ideality factor (n) changed from 5.28 to 2.02. For a reduced defect density (N_d = 4×10¹⁵ cm^-3), the n remained within 1.45≤n≤1.92 for the same thickness range. A small increase in shunt resistance and almost no change in series resistance were observed in these cells. The low reverse saturation current density (J_o = 9.62×10^-11 A/cm²) and diode ideality factor (n = 2.02 or 1.45) were observed for amorphous silicon based solar cell with 100 nm thick active layer.

• 대한방사선기술학회지:방사선기술과학
• /
• 제4권1호
• /
• pp.45-53
• /
• 1981

In examinations of the stomach roentgenography, it is imperative to obtain adequate film density throughout all its different regions. Therefore, it is necessary to use more sophiscated exposure techniques. In order to achieve these purpose, the radiologic technologists must be measured abdominal thickness in variations with patient positions. In consideration of these problem, the author was made an experiment on correction method of kVp and mAs by abdominal thickness in roentgenography of the stomach. The results were summarized as follws: 1. When the patient in erect position, abdominal thickness was the most thickened at the level of 3cm inferior to umbilicus without regard to body habitus and it was the most thickened at the level of 3cm superior to umbilicus in prone and supine position. 2. As a result of measuring film density for stomach, the adequate film density was represented from 0.70 to 2.49 in erect position and $0.28{\sim}1.18$ in supine position, $0.5{\sim}2.45$ in prone position. 3. In order to obtain uniform film density in 1.25, the correction factor for kVp by abdominal thickness was represented average ${\pm}4.5kVp\;per\;{\pm}1cm$ in a fixed 50 mAs, and average ${\pm}3.9kVp\;per\;{\pm}1cm$ in a fixed 100mAs. 4. In order to obtain uniform film density in 1.25, the correction factor for mAs by abdominal thickness was represented average ${\pm}30.9%\;per\;{\pm}1cm$ in a fixed 80 kvp and ${\pm}26.9%\;per\;{\pm}1cm$ in a fixed 100kVp.

• Journal of Advanced Marine Engineering and Technology
• /
• 제28권6호
• /
• pp.993-999
• /
• 2004

The estimation of fatigue life at the design stage of membrane type LNG tank is very important in order to arrive at feasible and cost effective solutions considering the total lifetime of the tank. In this study, the practical procedure of fatigue life prediction by use of cumulative damage factors based on Miner-Palmgren hypothesis and probability density function has been shown with the corner region of Gaz Transport Membrane type LNG tank being used as an example. In particular the parameters of Weibull distribution that determine the stress spectrum are discussed. The main results obtained from this study are as follows: 1. The recommended value for the shape parameter of Weibull distribution for the LNG tank is 1.1 in case of using the direct calculation method proposed in this study. 2. The calculated fatigue life is influenced by the shape parameter of Weibull distribution and stress block. The safe fatigue design can be achieved by using higher value of shape parameter and the stress blocks divided into more stress blocks.

• 한국화재소방학회논문지
• /
• 제16권2호
• /
• pp.51-58
• /
• 2002

몬트리올 의정서에 의해서 규제받는 Halon-1301과 대체 물질중의 하나인 $CO_2$의 물성(밀도, 점도, 엔탈피)의 실험식을 구하였다. 문헌에서 얻은 실험값을 이용하여 온도에 대한 회귀분석에 의해서 실험식을 얻었다. 압축인자를 이용하여 온도에 대한 2차 함수로서 밀도에 관한 실험식을 제안하였다. 점도는 온도에 대한 지수함수로 표시되며, 보정인자를 사용하여 사용 온도범위를 확장하였다. 엔탈피는 열용량과 마찬가지로 온도에 대한 2차 함수로 정의하여 나타내었다. 본 연구에서 제안된 위의 실험식의 상관계수는 0.99 이상이었다.

• 한국의류학회지
• /
• 제28권11호
• /
• pp.1516-1523
• /
• 2004

The purpose of this study were to analyze the effect of weft knit structural characteristics on the subjective texture and sensibility. For this, the material was knitted into 8 kinds of weft plain knit fabrics with four kinds of fiber components such as wool, acryl, rayon, and nylon, 3 steps of densities and 3 steps of twist numbers to ply two yarns. The data were analyzed by factor analysis, ANOVA and multidimensional scaling. From factor analysis, subjective textures were categorized as 'bulk/resilience', 'surface/density' and 'soft/drape', and subjective sensibilities were categorized as 'natural/comfortable', 'feminine/elegance' and 'stable/neat' Among the knit structural characteristics, the component of fibers and the density of fabrics were the important factors to give variations in texture and sensibility : In comparison with wool knit of medium density, the knit fabrics of other components and different densities each showed a unique texture and sensibility. But twist number to ply two yams had a few influence on subjective properties. As a result of MDS analysis, the texture and sensibility of plain weft knit fabrics was classified as 'thin-full', 'hard-soft', 'young-old' and 'warm-cool'.

• 기본간호학회지
• /
• 제20권3호
• /
• pp.230-238
• /
• 2013

Purpose: This study was done to identify the relationship among bone mineral density (BMD), body composition and osteoporosis self-efficacy and to identify predictors of BMD in female nursing students. Method: Participants were 154 nursing students. Osteoporosis self-efficacy was determined by a self-report questionnaire. BMD was measured by ultrasound bone densitometry and body composition by a body composition analyzer. Data were collected between April 1 and 27, 2013 and analyzed using descriptive statistics, ANOVA, Scheff$\acute{e}$ test, Pearson correlation coefficient, and multiple regression with SPSS 18.0. Results: Mean BMD at the calcaneus site was $0.58{\pm}1.31$ (T-score). Incidence of osteopenia was 11.7%. Percentage of body fat (PBF)-defined obesity had higher prevalence than body mass index (BMI)-defined obesity. BMD had significant positive correlations with skeletal muscle mass (r=.226, p=.005) and fat free mass (r=.225, p=.005). The factor predicting BMD was skeletal muscle mass with 4.7% of explained variance. Conclusion: Study results indicate that of body composition components, skeletal muscle mass is the prime predicting factor for BMD. Thus to promote healthy bones, it is important to strengthen the muscles using a program, based on balanced development of all muscles.