• Journal of Korean Society of Forest Science
• /
• v.102 no.4
• /
• pp.477-483
• /
• 2013

The purpose of this study was to calculate uncertainty of emission factor collected data and to evaluate the applicability of Monte Carlo simulation technique. To estimate the distribution of emission factors (Such as Basic wood density, Biomass expansion factor, and Root-to-shoot ratio), four probability density functions (Normal, Lognormal, Gamma, and Weibull) were used. The two sample Kolmogorov-Smirnov test and cumulative density figure were used to compare the optimal probability density function. It was observed that the basic wood density showed the gamma distribution, the biomass expansion factor results the log-normal distribution, and root-shoot ratio showd the normal distribution for Pinus densiflora in the Gangwon region; the basic wood density was the normal distribution, the biomass expansion factor was the gamma distribution, and root-shoot ratio was the gamma distribution for Pinus densiflora in the central region, respectively. The uncertainty assessment of emission factor were upper 62.1%, lower -52.6% for Pinus densiflora in the Gangwon region and upper 43.9%, lower -34.5% for Pinus densiflora in the central region, respectively.

• Journal of Korean Society of Forest Science
• /
• v.100 no.2
• /
• pp.149-153
• /
• 2011

This study was conducted to examine the uncertainty analysis of the stem density and biomass expansion factor for Pinus rigida in Korea. A total of 57 representative sample trees were harvested. The age class in Pinus rigida forests was divided into two, which were stands with less than 20 years and more than 21 years. The influence of stand ages on biomass expansion factor showed that it was statistically significant (p=0.0001), but it was not significant on stem density (p=0.8070). The results of this study based on the uncertainty evaluation method which were suggested by IPCC guide line indicated that stem density of the stand with less than 20 years were 30.92%, while were 25.12% the stands with more than 21years. The uncertainty in biomass expansion factor of less than 20 years and more than 21 years were 60.32% and 22.42%, respectively. The uncertainty of less than 20 years was higher compared to those stands with more than 21 years. In the case of old stand, it showed the lowest uncertainty results but younger stands showed the highest uncertainty results. This study could be applied to our country's emission factor by using stem density and biomass expansion factors which were less than 20 years and more than 21 years for Pinus rigida in Korea.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.30 no.3
• /
• pp.295-303
• /
• 2012

Clarify wind energy productivity depends on three factors: the wind probability density function(PDF), the turbine's power curve, and the air density. The wind PDF gives the probability that a variable will take on the wind speed value. Wind shear refers to the change in wind speed with height above ground. The wind speed tends to increase with the height above ground. also, Wind PDF refers to the change with height above ground. Wind analysts typically use the Weibull distribution to characterize the breadth of the distribution of wind speeds. The Weibull distribution has the two-parameter: the scale factor c and the shape factor k. We can use a linear least squares algorithm(or Ln-least method) and moment method to fit a Weibull distribution to measured wind speed data which data was located same site and different height. In this study, find that the scale factor is related to the average wind speed than the shape factor. and also different types of terrain are characterized by different the scale factor slop with height above ground. The gross turbine power output (before accounting for losses) was caculated the power curve whose corresponding air density is closest to the air density. and air desity was choose two way. one is the pressure of the International Standard Atmosphere up to an elevation, the other is the measured air pressure and temperature to calculate the air density. and then each power output was compared.

• New & Renewable Energy
• /
• v.7 no.3
• /
• pp.83-91
• /
• 2011

The purpose of this study is to select appropriate location factors for wind power plant, provide detailed classification criteria, and find out appropriate sites for installing wind power plant in Gangwondo. In this study, the following 11 factors were extracted for site selection of wind power plant : wind resource, topography (valley angle, distance to the ridge), forest density, land use, preservation area, national park, Baekdu-Daegan, noise, shade, Transmission Line, and approaching roads. Each factor had relatively different level of importance so that AHP (Analytic Hierarchy Process) technique was used to calculated the weighted value per factor. For overlay analysis, classification criteria were prepared for each factor and each factor was classified into 3 grades : very appropriate, intermediate, poor. According to overlay analysis, the areas which received the highest grade (grade 5) was only in 0.16% of the total area of Gangwondo and had a tendency to exist along the mountain ridge over 600-meter elevation. Through analyzing the yearly average of wind power density, it was proved that the wind power density of areas with grade 4 or 5 had abundant wind resource over $400W/m^2$.

• Proceedings of the KIPE Conference
• /
• 1998.10a
• /
• pp.648-653
• /
• 1998

The conventional three-phase rectifier with bulky LC output filter has been widely used in the industry because of its distinctive advantages over the active power factor correction rectifier such as simple circuit, high reliability, and low cost. Over than 0.9 power factor can be achieved, which is acceptable in most of industry applications. This rectifier, however, is not easy to use for high power density applications since the LC filter is bulky and heavy. To solve this problem, a new simple rectifier is presented in this paper. By eliminating the bulky LC filter from the conventional diode rectifier without losing most of the advantages of the conventional rectifier, very high power density power conversion with high power factor can be achieved. Operation principle and design considerations are illustrated and verified by Pspice simulation and experimental results from a prototype of 3.3 kW rectifier followed by 100KHz zero voltage switching full bridge PWM converter

• Elastomers and Composites
• /
• v.49 no.2
• /
• pp.160-166
• /
• 2014

The formulation of six basecoats was designed using aluminium pastes for the per-painted system in the automotive. The aluminium pastes contain pancake type metallic pigment, #501, #801, #601 and cornflake type metallic pigment, #750, #770, #790. The relative cure density of the basecoat increased in order of #501, #801, #601, #750, #770, #790. T-bending, impact resistance, and taping adhesion showed increment with increasing cure density. In the appearance( combined factor) test on cornflake type pigment, The basecoat including the smallest particle size pigment, #790 resulted in the best combined factor compared to other two systems(#750, #770).

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.11a
• /
• pp.32-33
• /
• 2006

In this study, in order to develop multilayer ceramic actuator for ultrasonic nozzle and ultrasonic vibrator, PMN-PNN-PZT ceramics were fabricated using $Li_2CO_3$. $Na_2CO_3$ and ZnO as sintering aids. And then, their piezoelectric and dielectric properties according to the amount of ZnO addition were investigated. The addition of ZnO improved density, dielectric constant, electromechanical coupling factor, mechanical quality factor and piezoelectric d constant of PMN-PNN-PZT ceramics due to the increase of sinterability and accepter doping effect. Electromechanical coupling factor and mechanical quality factor of PMN-PNN-PZT ceramics increased with ZnO amount up to 0.4wt% and then decreased. At the sintering temperature of $900^{\circ}C$ and 0.4wt% ZnO addition, density, dielectric constant, electromechanical coupling factor, mechanical quality factor and piezoelectric d constant showed the optimum value of 7.876g/$cm^2$, 1299, 0.612, 1151 and 369pC/N, respectively.

• Journal of Nutrition and Health
• /
• v.37 no.2
• /
• pp.132-142
• /
• 2004

Nutritional factors affecting bone mineral density (BMD) in the different age groups of Korean men were investigated to obtain baseline data for maintaining bone health. Information on diet and anthropometry was collected in 80 elementary school children, 83 high school students, 87 adults aged 25 to 35 years and 98 elderly people over 60 years of age. Data for food and nutrient intake were obtained by 24-hour recall method. BMDs of lumbar spine (L$_2$- L$_4$) and femoral neck were measured by dual energy x-ray absorptiometry. The relationship between BMD and nutritional factors were analyzed. In the femoral neck, 5.7% of adults was classified as osteopenia and 47.9% and 37.8% of the elderly were classified as osteopenia and osteoporosis. It was shown that plant protein, Ca, p, Fe, thiamin, riboflavin and vitamin C intakes were related with BMD in all age groups. As for the mean adequacy ratio (MAR) of nutrients, the lowest quartile group of BMD showed significantly lower MAR among children. The RDA percent of nutrients was a strong influential factor on BMD. Subjects who consumed below 75% of Korean RDA in energy, vitamin A, thiamin, and vitamin C showed lower BMD. Stepwise multiple regression analysis revealed that MAR in children, vegetable Ca in adolescents, and vitamin C in adults and elderly people were the highest influential factor on BMD. Therefore, the above results demonstrated that not only calcium but also other nutrients such as protein, iron, vitamin A, riboflavin, and vitamin C were necessary in order to keep the healthy bone status. In addition, although there were various dietary factors that influenced bone density, MAR was identified as the major factor that affected bone density. Thus, a balanced diet that includes all nutrients is necessary for a healthy bone density. (Korean J Nutrition 37(2) : 132-142, 2004)

• 한국생물공학회:학술대회논문집
• /
• 2000.04a
• /
• pp.219-222
• /
• 2000

Physiological changes of Escherichia coli during the fed-batch fermentation process were characterized in this study. Overall cellular protein samples prepared at the different stage of fermentation were separated by 2-dimensional gel electrophoresis (2-DE), and differently expressed 15 proteins, Phosphotransferase enzyme I, GroEL, Trigger factor, ${\beta}$ subunit of ATP synthase, Transcriptional regulator KDGR, Phosphoglycerate mutase 1, Inorganic pyrophosphatase, Serine Hydroxymethyl-transferase, ${\alpha}$ subunit of RNA polymerase, Elongation factor Tu, Elongation factor Ts, Tyrosine-tRNA ligase, DnaK suppressor protein, Transcriptional elongation factor, 30S ribosomal protein S6 were identified using matrix-assisted laser desorption / ionization time-of-flight mass spectrometry (MALDI-TOF MS). When bacterial cells grow to high cell density, and IPTG-inducible heterologous protein is produced, expression level of overall cellular proteins was decreased. According to their functions in the cell, identified proteins were classified into three groups, proteins involved in transport process, small-molecule metabolism, and synthesis and modification of macromolecules.

• Aerospace Engineering and Technology
• /
• v.8 no.2
• /
• pp.13-18
• /
• 2009

In this study, an equivalent unit load methodology has been presented to simplify the fatigue analysis procedure. And fuselage structure fatigue life has been evaluated based on equivalent unit load. Finite element analysis has been carried out to analyze the stress intensity factor and geometrical correction factor that is needed for crack growth analysis. And strain energy density factor is used to predict the initial direction of crack propagation.