• 제목/요약/키워드: Densities

검색결과 3,409건 처리시간 0.025초

Changes in Phytoplasma Densities in Witches' Broom-Infected Jujube Trees over Seasons

  • Yi, Jae-Choon;Lim, Tae-Heon;Byeongjin Cha
    • The Plant Pathology Journal
    • /
    • 제17권5호
    • /
    • pp.295-299
    • /
    • 2001
  • The relative density of phytoplasmas in witches'broom (WB)-infected jujube trees was investigated using compatitive polymerase chain reaction (PCR). During dormant and defoliating seasons, the densities of phytoplasmas were about the same in roots and twigs. In early growing season, the density showed the highest rates in roots, then in twigs and in petioles. however, the density was highest in petioles and the lowest in roots during actively growing season. Throughout the year, root samples did not show any serious fluctuation compared with that of t2wigs and petioles. Density was lowest during actively growing season in root samples. In contrast, petiole sample densities varied to a great extent depending on the season, very high during actively growing season, but very low during the early growing season, In twig samples, the densities were very high and almost the same in both defoliating and dormant seasons. Among the parts of the trees, phytoplsma density was the most stable in root samples throughout the year. The highest densities of phytoplasmas were about the same in all tree parts. These results suggest that the phytoplasmas may overwinter not only in roots but also in twigs, and that multiplication rate of phytoplsma becomes very high right after the early growing season.

  • PDF

여름철 장목만의 환경요인과 중형동물플랑크톤 단주기 변동과의 상관성 (Relationship between Environmental Factors and Short-term Variations of Mesozooplankton During Summer in Jangmok Bay, South Coast of Korea)

  • 장민철;신경순;장풍국;이우진
    • Ocean and Polar Research
    • /
    • 제32권1호
    • /
    • pp.41-52
    • /
    • 2010
  • Daily samples were collected during summer in order to analyse changes in the mesozooplankton community and to identify the major environmental factors that may influence mesozooplankton abundance in Jangmok Bay. A single site in the bay was sampled 47 times from July to September 2003. Mesozooplankton community, hydrographic (watertemperature, salinity, dissolvedoxygen) and biological (chlorophyll-a, ciliates densities, Noctiluca scintillans densities) factors were determined. The mesozooplankton abundance varied remarkably from 954 to $14,816\;inds.\;m^{-3}$. The six taxa of Evadne tergestina, barnacle nauplii and cypris, Paracalanus parvus s.1., Acartia omorii, Penilia avirostris and Sagitta crassa dominated numerically, contributing 86% of total mesozooplankton abundance. Stepwise multiple linear regression analysis was applied to find correlation between environmental factors and fluctuation in the abundance of dominant species and mesozooplankton. A. omorii was significantly correlated with temperature and N. scintillans densities. E. tergestina was correlated with temperature, salinity, and ciliate densities, whereas P. avirostris was correlated with temperature and dissolved oxygen. Among the environmental factors, mesozooplankton abundance correlated most strongly with N. scintillans densities. Accordingly, N. scintillans may be a key player in controlling the fluctuation of mesozooplankton abundance as a strong competitor for same food resources.

Measurement of Interface Trapped Charge Densities $(D_{it})$ in 6H-SiC MOS Capacitors

  • Lee Jang Hee;Na Keeyeol;Kim Kwang-Ho;Lee Hyung Gyoo;Kim Yeong-Seuk
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2004년도 ICEIC The International Conference on Electronics Informations and Communications
    • /
    • pp.343-347
    • /
    • 2004
  • High oxidation temperature of SiC shows a tendency of carbide formation at the interface which results in poor MOSFET transfer characteristics. Thus we developed oxidation processes in order to get low interface charge densities. N-type 6H-SiC MOS capacitors were fabricated by different oxidation processes: dry, wet, and dry­reoxidation. Gate oxidation and Ar anneal temperature was $1150^{\circ}C.$ Ar annealing was performed after gate oxidation for 30 minutes. Dry-reoxidation condition was $950^{\circ}C,$ H2O ambient for 2 hours. Gate oxide thickness of dry, wet and dry-reoxidation samples were 38.0 nm, 38.7 nm, 38.5 nm, respectively. Mo was adopted for gate electrode. To investigate quality of these gate oxide films, high frequency C- V measurement, gate oxide leakage current, and interface trapped charge densities (Dit) were measured. The interface trapped charge densities (Dit) measured by conductance method was about $4\times10^{10}[cm^{-1}eV^{-1}]$ for dry and wet oxidation, the lowest ever reported, and $1\times10^{11}[cm^{-1}eV^{-1}]$ for dry-reoxidation

  • PDF

Evaluation of surface displacement equation due to tunnelling in cohesionless soil

  • Mazek, Sherif A.
    • Geomechanics and Engineering
    • /
    • 제7권1호
    • /
    • pp.55-73
    • /
    • 2014
  • The theoretical predictions of ground movements induced by tunnelling are usually based on the assumptions that the subsoil has the same soil densities. The theoretical prediction does not consider the impact of different sand soil types on the surface settlement due to tunnelling. The finite elements analysis (FEA) considers stress and strength parameters of the different sand soil densities. The tunnel construction requires the solution of large soil-structure interaction problem. In the present study, the FEA is used to model soil-tunnel system performance based on a case study to discuss surface displacement due to tunnelling. The Greater Cairo metro tunnel (Line 3) is considered in the present study as case study. The surface displacements obtained by surface displacement equation (SDE) proposed by Peck and Schmidt (1969) are presented and discussed. The main objective of this study is to capture the limitations of the parameters used in the SDE based on the FEA at different sand soil densities. The study focuses on the parameters used in the SDE based on different sand soil densities. The surface displacements obtained by the FEA are compared with those obtained by the SDE. The results discussed in this paper show that the different sand soil densities neglected in the SDE have a significant influence on the surface displacement due to tunnelling.

변동풍속의 파워 스펙트럴 밀도에 관한 평가 (Estimation on the Power Spectral Densities of Daily Instantaneous Maximum Fluctuation Wind Velocity)

  • 오종섭
    • 한국방재안전학회논문집
    • /
    • 제10권2호
    • /
    • pp.21-28
    • /
    • 2017
  • 시공간적으로 불규칙하게 작용하는 변동 풍속 난류의 자료는 풍공학적으로 돌풍계수 평균풍속 변동 풍하중등의 계산에서 요구되지만, 내풍 및 사용성에 따른 동적응답의 평가에서는 변동 풍속의 파워 스펙트럴 밀도함수가 요구된다. 본 논문에서는 1987-2016.12.1일까지의 일순간최대풍속 자료를 확률과정으로 가정했고, 이 실측된 자료와 확률이론을 근거로 평균류방향 파워 스펙트럴 밀도 함수에 대한 기초적 자료를 얻고자 대표지점(6개 지점)을 선정했다. 선정된 각 지점에 대한 일순간최대풍속자료는 기상청으로부터 획득했다. 해석결과 본 논문에서 평가된 스펙트럼 모델은 저진동수 영역에서는 Solari, 고진동수 영역에서는 von Karman의 모델과 근접한 현상을 나타냈다.

Analytical Techniques for Measurement of Crosslink Densities of Rubber Vulcanizates

  • Son, Chae Eun;Choi, Sung-Seen
    • Elastomers and Composites
    • /
    • 제54권3호
    • /
    • pp.209-219
    • /
    • 2019
  • It is important to analyze crosslink densities of rubber articles because the physical properties are dependent on the crosslink densities. In this paper, analytical techniques for the measurement of crosslink densities of rubber vulcanizates are described. The most widely used method to measure the crosslink density is a swelling method combined with the Flory-Rehner equation. Application of the interaction parameter (${\chi}$) of rubber and swelling solvent is critical because the crosslink density is absolutely dependent on the ${\chi}$ value. Methods for obtaining ${\chi}$ employ not only solubility parameters of the polymer and swelling solvent but also inverse gas chromatography (IGC). The solubilities of rubbers can be obtained using micro differential scanning calorimetry (${\mu}DSC$), intrinsic viscosity measurement, and UV-visible spectroscopy. Nuclear magnetic resonance (NMR) spectroscopy has been also used for the measurement of the crosslink density using the $T_2$ relaxation time, which is determined by spin-spin relaxation in solid-state NMR. For sulfur-cured rubber vulcanizates, crosslink densities according to the crosslink types of mono-, di-, and polysulfides are measured by treating the rubber samples with a chemical probe composed of thiol and amine compounds. Measurement methods of physical crosslinking by filler, crystallization, and ionic bonding have also been introduced.

Optimal bandwidth in nonparametric classification between two univariate densities

  • ;강기훈
    • 한국통계학회:학술대회논문집
    • /
    • 한국통계학회 2002년도 춘계 학술발표회 논문집
    • /
    • pp.1-5
    • /
    • 2002
  • We consider the problem of optimal bandwidth choice for nonparametric classification, based on kernel density estimators, where the problem of interest is distinguishing between two univariate distributions. When the densities intersect at a single point, optimal bandwidth choice depends on curvatures of the densities at that point. The problem of empirical bandwidth selection and classifying data in the tails of a distribution are also addressed.

  • PDF

재배년수에 따른 야생약초 , 배초향의 생장 및 수량 변이 (Effect Planting Dates and Density on Agronomic Characteristics and Yield of Agastache rugosa KUNTZE)

  • 최성규
    • 한국자원식물학회지
    • /
    • 제7권2호
    • /
    • pp.143-147
    • /
    • 1994
  • The experiment was carried out to study the influence of planting densities and on some agronomic characters and yield of rresh weight in Agastache rugoso. The results obtained are summarized as fol-lows; stem length was long in dense planing and short in spacious Planting. Stem diameter was thickIn spacious planting, and was thin in dense planting. Yield was higher in dense planting densities (20x20cm : 2spiants/m, 30$\times$20cm : 17plants/m).

  • PDF

Performance of the adaptive LMAT algorithm for various noise densities in a system identification mode

  • 이영환;김상덕;조성호
    • 한국통신학회논문지
    • /
    • 제23권8호
    • /
    • pp.1984-1989
    • /
    • 1998
  • Convergence properties of the stochastic gradient adaptive algorithm based on the least mean absolute third (LMAT) error criterion is presented.In particular, the performnce of the algorithmis examined and compared with least mena square (LMS) algorithm for several different probability densities of the measurement noisein a system identification mode. It is observedthat the LMAT algorithm outperforms the LMS algorithm for most of the noise probability densities, except for the case of the exponentially distributed noise.

  • PDF

ON THE LEAST INFORMATIVE DISTRIBUTIONS UNDER THE RESTRICTIONS OF SMOOTHNESS

  • Lee, Jae-Won;Park, Sung-Wook;Nikita Vil'checvskiy;Georgiy Shevlyakov
    • 대한수학회지
    • /
    • 제35권3호
    • /
    • pp.755-764
    • /
    • 1998
  • The least informative distributions minimizing Fisher information for location are obtained in the classes of continuously differentiable and piece-wise continuously differentiable densities with the additional restrictions on their values at the median and mode of population in the point and interval forms. The structure of these optimal solutions depends both on the assumptions of smoothness and form of characterizing restrictions of the class of distributions: in the class of continuously differentiable densities, the least informative distributions are finite and have the cosine-type form, and, in the class of piece-wise continuously differentiable densities, the least informative densities have exponential-type tails, the Laplace density in particular. The dependence of optimal solutions on the assumptions of symmetry is also analyzed.

  • PDF