• 한국해양학회지
• /
• 제7권2호
• /
• pp.47-58
• /
• 1972

Densities and composition of phytoplankton and zooplankton, concentrations of particulate organic carbon, particulate organic nitrogen, and particulate inorganic matter were determined in the coastal area of Ko-ri during one year. There are peaks of densities of plankton organisms in summer, autumn, and spring Concentrations of particulate organic carbon ranged from 35 to 3,785 mg/㎥ (averaging 868mg/㎥ ), particulate organic nitrogen ranged from 4.4 to 158mg/㎥ (averaging 45mg/㎥), inorganic suspended matter ranged from 0.6 to 11.6 mg/L (averaging 5.7mg/L), and the carbon-nitrogen ratios of the suspended matter were varied from 0.5 to 231(averaging 35), with each seasonal cycle. The phytoplankton density and particulate organic carbon were possitively correlated from March to November, negatively from December to February, and the zooplankton dinsity and particulate organic nitrogen were well correlated.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 Techno-Fair 및 추계학술대회 논문집 전기물성,응용부문
• /
• pp.73-74
• /
• 2008

This paper analyses current densities induced inside a worker using AC arc welder when he wear a protective with double shielding cloth. Applying the boundary element method, we calculate current densities induced in organs inside a worker in case he was located at 1[cm] far from a power cable of AC arc welder. As results of study, we fined aa protective cloth, which has high permeability in inner layer and high conductivity in outer layer, can give a higher shielding efficiency.

• Korean Journal of Geomatics
• /
• 제3권2호
• /
• pp.115-122
• /
• 2004

NASA, NSF and USGS jointly conducted airborne LIDAR surveys to acquire numerous surface points with high densities over the Antarctic Dry Valleys and its vicinity, The huge set of these points retains two characteristics undesirable for DEM generation, which are unusually high blunder ratio and large variation of the local point densities. Hence, in order to not only reduce the undesirable effects due to these characteristics but also process the huge number of points within reasonable limits of time and resources, we developed an efficient, robust, nearly automatic approach to DEM generation. This paper reports about the application of this approach to generating high-resolution precise DEMs from the Antarctic LIDAR surveys and the evaluation of their accuracy.

• 수산해양교육연구
• /
• 제22권3호
• /
• pp.354-361
• /
• 2010

Author investigated the distribution of debris by a bottom trawler in the eight sea stations over the sea between Busan and Jeju island. 2,118 debris in number and 2,401.5kg in weight were collected. Most of collected debris were fishing gears which seemed to be lost or discarded during operations, and also most of the fishing gears was an eel pot. The densities of debris per hectare in number and weight were 1.21pieces and 2.639kg respectively. Station A was the highest densities compared to other stations, showing 2.7pisces and 4.9kg per hectare in number and weight. The closer to Busan it is, the higher density of debris can be collected.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.903-906
• /
• 2003

Doping a small amount of a phosphorescent dye into an organic light-emitting diodes(OLED) can lead to a significant improvement in the device properties. The fluorescent host materials like TAZ, CBP have been used, but have a problem of rapid decay of efficiency at high current densities. To alleviate this problem, phosphorescent host was introduced. The whole configuration of OELD fabricated was ITO/a-NPD(50nm)/Zn $cluster:Ir(ppy)_{3}(30nm)/BCP{(10nm)/Alq_{3}(20nm)$ /Al:Li. The OLED showed high luminance (> 50,000 $cd/m^{2}$ ) and external efficiency(5.7%). At higher current densities, rapid decay of external quantum efficiency or host emission, which was frequently observed in the fluorescent host system, were not observed.

• 한국세라믹학회지
• /
• 제29권3호
• /
• pp.241-251
• /
• 1992

The effects of slip composition and processing conditions on the fabrication of ceramic heat exchanger cores by doctor blade process were investigated. Since the effects of those two variables were inter-dependent, the effects of binder system, binder plus plasticizer, were extensively studied for a limited range of processing conditions and a pre-determined ceramic composition. The content of binder system and the ratio of binder to plasticizer were identified as main variables to affect densities and mechanical properties of green sheets, compressive properties and bond strengths of laminates, and shrinkages and their anisotropy of sintered laminates. However, sintered densities and water absorptions of laminates were not influenced by either the content of binder system or the ratio of binder to plasticizer, when the debinded laminates had a relatively high density (relative density of >55% in this study).

• The Korean Journal of Ceramics
• /
• 제5권3호
• /
• pp.217-223
• /
• 1999

Proten-conductive $SrZr_{0.95} Y_{0.05} O_{2.975}$ powder was prepared by citrate gel method its characteristics and sinterability were investigated. Amorphous gel could be obtained from a citric acid solution that $SrCO_3$ and metal nitrates were dissolved. The initial decomposition of the gel proceeded up to $250^{\circ}C$, followed by combustion of its decomposition products in the temperature range from $250^{\circ}C$ to $500^{\circ}C$. A well-crystallized perovskite phase with a stoichiometric composition after calcination at $1000^{\circ}C$. Sintering green compacts of this powder for 6 h showed a considerable densification to start at $1200^{\circ}C$ and resulted in 86.8% and 96.5% relative densities at $1400^{\circ}C$ and $1600^{\circ}C$, respectively. Whereas, the powder compacts prepared by solid state reaction had much lower relative densities, 73% at $1400^{\circ}C$ and 92% at $1600^{\circ}C$.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2008년도 하계종합학술대회
• /
• pp.383-384
• /
• 2008

In this paper, we extract interface trap density with treatment of gate dielectric of OTFT's. Interface trap densities in this paper were extracted from transfer curves. We obtained interface trap densities in pentacene / PVP interface Non-treated device has $1.4{\times}10^{12}cm^{-2}eV^{-1}$ Dit and treated device has $1.1{\times}10^{12}cm^{-2}eV^{-1}$ Dit.

• Corrosion Science and Technology
• /
• 제2권1호
• /
• pp.12-17
• /
• 2003

The effects of Cr content and film formation potential on electronic behaviors of the passive film on Fe-Cr alloys were investigated in borate buffer solution. Influence of pH on passive films of both Fe-Cr and Fe-Cr-Mo alloys was also investigated. Mott-Schottky and cyclic voltammetry techniques were used to elucidate electronic behaviors of passive films and their electrochemical characteristics. AES analysis of passive films was carried out. Results showed that doping density decreased as Cr content and film formation potentials increased. The addition of Mo to Fe-Cr alloy had little influence on donor densities in pH 9.2 solution but some effects on the decrease in donor densities in pH 1.6 acidic solution.

• 응용통계연구
• /
• 제24권4호
• /
• pp.721-733
• /
• 2011

We consider the state price densities that are implicit in financial asset prices. In the pricing of an option, the state price density is proportional to the second derivative of the option pricing function and this relationship together with no arbitrage principle imposes restrictions on the pricing function such as monotonicity and convexity. Since the state price density is a proper density function and most of the shape constraints are caused by this, we propose to estimate the state price density directly by specifying candidate densities in a flexible nonparametric way and applying methods of regularization under extra constraints. The problem is easy to solve and the resulting state price density estimates satisfy all the restrictions required by economic theory.