• Structural Engineering and Mechanics
• /
• 제46권5호
• /
• pp.673-693
• /
• 2013

This paper presents a systematic design and training procedure for the feed-forward back-propagation neural network (NN) modeling of both forward and inverse behavior of a rotary magnetorheological (MR) damper based on experimental data. For the forward damper model, with damper force as output, an optimization procedure demonstrates accurate training of the NN architecture with only current and velocity as input states. For the inverse damper model, with current as output, the absolute value of velocity and force are used as input states to avoid negative current spikes when tracking a desired damper force. The forward and inverse damper models are trained and validated experimentally, combining a limited number of harmonic displacement records, and constant and half-sinusoidal current records. In general the validation shows accurate results for both forward and inverse damper models, where the observed modeling errors for the inverse model can be related to knocking effects in the measured force due to the bearing plays between hydraulic piston and MR damper rod. Finally, the validated models are used to emulate pure viscous damping. Comparison of numerical and experimental results demonstrates good agreement in the post-yield region of the MR damper, while the main error of the inverse NN occurs in the pre-yield region where the inverse NN overestimates the current to track the desired viscous force.

• Preventive Nutrition and Food Science
• /
• 제11권4호
• /
• pp.318-322
• /
• 2006

The objective of this experiment was to investigate the effect of extrusion of ginseng roots in twin screw extruder on susceptibility of ginseng starch toward hydrolysis by ${\alpha}-amylase$ BAN 480L (Novozyme, Denmark) and cellulase Celluclast 150L and saccharification by amyloglucosidase AMG-E (Novozyme, Denmark). The extrusion was conducted at 22% and 30% moisture contents of feed at screw speed 300 rpm. Barrel temperature at zone 1 was adjusted at $100^{\circ}C$ and $120^{\circ}C$. The results showed that extrusion process improved the ginseng ${\alpha}-amylase$ susceptibility as compared to traditionally dried ginseng (white and red ginseng). Reducing sugar of hydrolyzed extruded samples was 2,500% of its initial concentration, whereas the reducing sugar of hydrolyzed non-extruded sample was only 200% of its initial concentration. However, addition of cellulase during liquefaction lowered the saccharification yield of both non-extruded and extruded samples as well.

• 셀메드
• /
• 제7권4호
• /
• pp.20.1-20.6
• /
• 2017

Inflammation has been linked to various diseases. Especially, fatigue is a frequent symptom in several inflammatory disorders. Therefore, blocking inflammatory process is effective in fatigue. We investigated whether Denmark porcine placenta (DPP) alleviates fatigue by inhibiting inflammatory reaction using forced swimming test (FST) animal model and RAW264.7 cells. In FST-induced fatigue animal model, the mice which received the DPP for 21 days showed decreases of interleukin $(IL)-1{\beta}$ and IL-6 serum levels. Furthermore, our data revealed that lipopolysaccharide (LPS)-induced $IL-1{\beta}$, IL-6, and tumor necrosis $factor-{\alpha}$ secretion were markedly inhibited by DPP in RAW264.7 cells without inducing cytotoxicity. LPS-enhanced nitric oxide secretion and inducible nitric oxide synthase expression were inhibited by DPP. The present study also figured out that these effects of DPP were mediated by blockade of caspase-1 and nuclear $factor-{\kappa}B$ activation. Taken together, our results indicated that DPP could be alleviating fatigue as candidate of anti-inflammatory agent.

• Archives of Plastic Surgery
• /
• 제32권6호
• /
• pp.782-786
• /
• 2005

Pressure sores are a common complication of hospitalized patients. However, It is often impossible to correct surgically because the general conditions of these patients are poor. It is known that the hydrogel has a powerful autolytic effect by providing moist environments and facilitates wound healing and hydrocolloid dressing is also known to promotes granulation tissue formation and epithelialization. The patients were treated with hydrogel(Purion $gel^{(R)}$, Coloplast A/S, Denmark) and hydrocolloid dressing (Comfeel Plus Transparent $Dressing^{(R)}$, Coloplast A/S, Denmark) after surgical debridement of pressure sores progressed to stage III(n=2) and IV(n=7). This combination treatment could facilitate to debride the nectrotic tissue and promote granulation tissue formation epithelialization simultaneously. We could achieve complete healing of pressure sores using the combination treatment without requiring surgical correction. In conclusion, hydrogel in combination with hydrocolloid dressing is effective in acheiving complete healing of progressed pressure sores.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제6권4호
• /
• pp.1024-1040
• /
• 2014

The theoretical background and a numerical solution procedure for a time domain hydroelastic code are presented in this paper. The code combines a VOF-based free surface flow solver with a flexible body motion solver where the body linear elastic deformation is described by a modal superposition of dry mode shapes expressed in a local floating frame of reference. These mode shapes can be obtained from any finite element code. The floating frame undergoes a pseudo rigid-body motion which allows for a large rigid body translation and rotation and fully preserves the coupling with the local structural deformation. The formulation relies on the ability of the flow solver to provide the total fluid action on the body including e.g. the viscous forces, hydrostatic and hydrodynamic forces, slamming forces and the fluid damping. A numerical simulation of a flexible barge is provided and compared to experiments to show that the VOF-based flow solver has this ability and the code has the potential to predict the global hydroelastic responses accurately.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 ICEIC The International Conference on Electronics Informations and Communications
• /
• pp.421-426
• /
• 2004

Analyzing adaptive possibilities of agents in multi-agents system, we have discovered new aspects of ambient intelligence in distributed modular systems using intelligent building blocks (I-BLOCKS) [1]. This paper describes early scientific researches related to technical design, applicable experiments and evaluation of adaptive processing and information interaction among I-BLOCKS allowing users to easily develop ambient intelligence applications. The processing technology presented in this paper is embedded inside each DUPLO1 brick by microprocessor as well as selected sensors and actuators in addition. Behaviors of an I-BLOCKS modular structure are defined by the internal processing functionality of each I-Blocks in such structure and communication capacities between I-BLOCKS. Users of the I-BLOCKS system can do 'programming by building' and thereby create specific functionalities of a modular structure of intelligent artefacts without the need to learn and use traditional programming language. From investigating different effects of modem artificial intelligence, I-BLOCKS we have developed might possibly contain potential possibilities for developing applications in ambient intelligence (AmI) environments. To illustrate these possibilities, the paper presents a range of different experimental scenarios in which I-BLOCKS have been used to set-up reconfigurable modular systems. The paper also reports briefly about earlier experiments of I-BLOCKS in different research fields, allowing users to construct AmI applications by a just defined concept of modular artefacts [3].

• The Journal of Advanced Prosthodontics
• /
• 제14권4호
• /
• pp.236-249
• /
• 2022

PURPOSE. The present study compared the accuracy between digital and conventional implant impressions. MATERIALS AND METHODS. The experimental models were divided into six groups depending on the implant location and the scanning span. Digital impressions were captured using the intraoral optical scanner TRIOS (3Shape, Copenhagen, Denmark). Conventional impressions were taken with the monophase impression material based on addition-cured silicones, Honigum-Mono (DMG, Hamburg, Germany). A high-precision laboratory scanner D900 (3Shape, Copenhagen, Denmark) was used to obtain digital data of resin models and stone casts. Surface tessellation language (STL) datasets from scanner were imported into the analysis software Geomagic Qualify 14 (3D Systems, Rock Hill, SC, USA), and scan body deviations were determined through two-dimensional and three-dimensional analyses. Each scan body was measured five times. The Sidak t test was used to analyze the experimental data. RESULTS. Implant position and scanning distance affected the impression accuracy. For a unilateral arch implant and the mandible models with two implants, no significant difference was observed in the accuracy between the digital and conventional implant impressions on scan bodies; however, the corresponding differences for trans-arch implants and mandible with six implants were extremely significant (P<.001). CONCLUSION. For short-span scanning, the accuracy of digital and conventional implant impressions did not differ significantly. For long-span scanning, the precision of digital impressions was significantly inferior to that of the traditional impressions.

• Asian-Australasian Journal of Animal Sciences
• /
• 제28권2호
• /
• pp.280-289
• /
• 2015

Anaerobic digestion is an efficient and renewable energy technology that can produce biogas from a variety of biomasses such as animal manure, food waste and plant residues. In developing countries this technology is widely used for the production of biogas using local biomasses, but there is little information about the value of these biomasses for energy production. This study was therefore carried out with the objective of estimating the biogas production potential of typical Vietnamese biomasses such as animal manure, slaughterhouse waste and plant residues, and developing a model that relates methane ($CH_4$) production to the chemical characteristics of the biomass. The biochemical methane potential (BMP) and biomass characteristics were measured. Results showed that piglet manure produced the highest $CH_4$ yield of 443 normal litter (NL) $CH_4kg^{-1}$ volatile solids (VS) compared to 222 from cows, 177 from sows, 172 from rabbits, 169 from goats and 153 from buffaloes. Methane production from duckweed (Spirodela polyrrhiza) was higher than from lawn grass and water spinach at 340, 220, and 110.6 NL $CH_4kg^{-1}$ VS, respectively. The BMP experiment also demonstrated that the $CH_4$ production was inhibited with chicken manure, slaughterhouse waste, cassava residue and shoe-making waste. Statistical analysis showed that lipid and lignin are the most significant predictors of BMP. The model was developed from knowledge that the BMP was related to biomass content of lipid, lignin and protein from manure and plant residues as a percentage of VS with coefficient of determination (R-square) at 0.95.This model was applied to calculate the $CH_4$ yield for a household with 17 fattening pigs in the highlands and lowlands of northern Vietnam.

• 한국인구학
• /
• 제6권1호
• /
• pp.43-69
• /
• 1983

This study was conducted to make the life tables from specific causes of death in Korea. Both "Life tables of Korea in l978-79" and "the statistics on causes of death statistics in 1980" issued by Economic Planning Board were used as source of data for this study. Among the 58, 187 death certificates reported to the concerned authorities, 39, 801 causes were drawn for the purpose of this study. As a result, it is revealed that two thirds of men in Korea died from these 10 major causes of death. The summarized results are as follows: 1. According to recent statistics, 10 major causes of death in 1980 were shown in the order of 1) malignant neoplasms, 2) cerebrovascular disease, 3) accidents and adverse effects, 4)hypertensive disease, 5) ischaemic heart disease and heart attack, 6) chronic liver disease and cirrhosis, 7) tuberculosis, 8) pneumonia, bronchitis, emphysema and asthma, 9) suicide, 10) diabetes mellitis. 2. The major causes of death in Korea were very similar to those of developed countries such as West Germany, Denmark and Japan. This means that our pattern of death causes is almost approaching to that of developed countries. 3. Our crude death rate in 1980 was on the line of 6.6 per 1, 000 people. This is very low level, compared with 12.1 in West Germany and 10.0 in Denmark, however, our age sepcific death rate was on the verge of doubled level in each age category as to that of West Germany, Denmark and Japan. The fact tells us that our death rate is very high yet, especially in young and prime adult age, and the proportion of the aged is quite low. 4. Average ages of people died from malignant neoplasms, cerebro vascular diseases and hypertensive diseases were 63.1, 66.6, 67.3 respectively, however, that of accidents and adverse effect was only 42.5. This shows that accidents occur indifferently from age. 5. In the curve of eventual death probability, the curve of malignant neoplasms was the highest of all curves before 60 in age. However, the probability curve of eventually dying from accidents and adverse effects tends to decline with age. 6. In this study five life tables from major causes of death (four leading causes of death and of tuberculosis) were constructed for 1979. These life tables are reflecting accurately the effects of age distribution on the specific cause of death. In the surviving curje of these tables we can see that the curve of accidents is adversely related to age. While curves of neoplasms, hypertension and tuberculosis are not diminishing before 40 in age, they are going sharply downward after 50 in age.ard after 50 in age.

• 천문학회보
• /
• 제37권2호
• /
• pp.207.1-207.1
• /
• 2012

One of the key aspects of the upcoming Ultra-Fast Observatory (UFFO) Pathfinder for Gamma-Ray Bursts(GRBs) identification will be the UFFO Burst Alert & Trigger Telescope(UBAT), based on a novel space telescope technique. The UBAT consists of coded mask, hopper, and detector module(DM). The UBAT DM consists of YSO crystal arrays, multi-anode photo mulipliers, and readout electronics. We will present the design and construction of the UBAT DM, and the response of the UBAT DM to X-ray sources.