• 한국항공우주학회지
• /
• 제44권12호
• /
• pp.1017-1026
• /
• 2016

두 가지의 비표면 가시화 기법과 이들 기법의 와류 적용 예를 기술한다. 두 가지 가시화 기법 중 하나는 전통적인 연기선 기법이고, 또 다른 하나는 가정용 초음파 가습기에서 발생하는 미세 수적을 사용하는 기법이다. 연기선 기법은 공기 흐름 속도에 제한이 있으며(0.07 mm 지름의 연기선의 경우 약 5 m/sec), 오염의 문제점이 있지만 매우 정교하고 선명한 연기 유맥선 시트를 발생시킬 수 있다. 이 기법은 3차원 날개의 날개 끝 와류의 가시화에 적용되었다. 초음파 가습기 미세 수적 기법은 연기선 기법에 비하여 공기 흐름 속도를 보다 크게 할 수 있으며(10 m/sec 이상), 독성과 오염의 문제를 해결할 수 있다. 초음파 가습기 미세 수적 기법은 정점 스트레이크를 가지는 이중 삼각날개에서 발생하는 복잡한 와류 시스템의 가시화에 성공적으로 적용되었다.

• 한국군사과학기술학회지
• /
• 제23권2호
• /
• pp.125-138
• /
• 2020

One of the most important steps to consider in utilizing micro-satellites for surveillance or reconnaissance operations is the design of the satellite constellation. The Walker-Delta constellation which is commonly used in designing satellite constellations is not ideal for this operation in which military satellites are required to monitor specific regions continuously in a stable manner. This study aims to discuss the methodology for designing a satellite constellation that is capable of monitoring the fixed region at the fixed time each day by using the Sun synchronous Orbit. The BB(Beach Ball) constellation that we propose outperforms the Walker-Delta constellation in terms of robustness and it holds the merit of being simple in its design, thereby making future expansions more convenient. We expect the BB constellation will have a high applicability as the operational concept of military surveillance satellites is established in the near future.

• Journal of Mechanical Science and Technology
• /
• 제20권1호
• /
• pp.147-157
• /
• 2006

This paper represents a numerical study of the flow field due to the interactions between a pair of vortices produced by vortex generators in a rectangular channel flow. In order to analyze longitudinal vortices induced by the vortex generators, the pseudo-compressibility method is introduced into the Reynolds-averaged Navier-Strokes equations of a 3-dimensional unsteady, incompressible viscous flow. A two-layer $k-{\epsilon}$ turbulence model is applied to a flat plate 3-dimensional turbulence boundary to predict the flow structure and turbulence characteristics of the vortices. The computational results predict accurately the vortex characteristics related to the flow field, the Reynolds shear stresses and turbulent kinetic energy. Also, in the prediction of skin friction characteristics the computational results are reasonably close to those of the experiment obtained from other researchers.

• 한국전산유체공학회지
• /
• 제13권2호
• /
• pp.1-7
• /
• 2008

For Aerodynamic analysis of vehicle at altitude, 100km, the validity of governing equations based on continuum model, was reviewed. Also, as the preliminary study for the sub-orbital space plane development, a candidate geometry was suggested and computational fluid dynamic(CFD) analysis was performed for various angles of attack in subsonic and supersonic flow regimes to analyze the aerodynamic characteristics and performance. The inviscid flow analyses showed that the stall starts at angle of attack above $20^{\circ}$, the maximum drag is generated at angle of attack, $87^{\circ}$ and the maximum lift to drag ratio is about 8 in subsonic flow. In supersonic, the stall angle is about $40^{\circ}$ and the maximum drag is generated at angle of attack, $90^{\circ}$. Also, mach number distribution of re-entry vehicle was computed versus altitudes.

• 설비공학논문집
• /
• 제17권9호
• /
• pp.799-807
• /
• 2005

The flow characteristics and the heat transfer rate on a surface by the interaction of a pair of vortices are studied numerically. To analyze the common flow up produced by vortex generators in a rectangular channel flow, the pseudo-compressibility viscous method is introduced into the Reynolds-averaged Navier-Stokes equation for 3-dimensional unsteady, incompressible viscous flows. To predict turbulence characteristics, a two-layer $k-\varepsilon$ turbulence model is used on the flat plate 3-dimensional turbulence boundary The computational results predict accurately Reynolds stress, turbulent kinetic energy and flow field generated by the vortex generators. The numerical results, such as thermal boundary layers, skin friction characteristics and heat transfers, are also reasonably close to the experimental data.

• Wind and Structures
• /
• 제4권3호
• /
• pp.227-246
• /
• 2001

The objective of this study is to understand the flow above the front edge of low-rise building roofs. The greatest suction on the building is known to occur at this location as a result of the formation of conical vortices in the separated flow zone. It is expected that the relationship between this suction and upstream flow conditions can be better understood through the analysis of the vortex flow mechanism. Experimental measurements were used, along with predictions from numerical simulations of delta wing vortex flows, to develop a model of the pressure field within and beneath the conical vortex. The model accounts for the change in vortex suction with wind angle, and includes a parameter indicating the strength of the vortex. The model can be applied to both mean and time dependent surface pressures, and is validated in a companion paper.

• 대한기계학회논문집B
• /
• 제24권2호
• /
• pp.288-297
• /
• 2000

This paper describes the results of an experimental investigation of the flow characteristics and the heat transfer rate on a surface by interaction of a pair of vortices. The test facility consists of a boundary-layer wind tunnel with a vortex introduced into the flow by half-delta wings(vortex generators) protruding from the surface. In order to control the strength of the two longitudinal vortices, the angles of attack of the vortex generators are varied from 20 degree to 45 degree, but spacings between the vortex generators are fixed to 4 cm. The 3-dimensional mean velocity downstream of the vortex generators is measured by a five-hole pressure probe, and the hue-capturing method using the thermochromatic liquid crystals has been used to provide the local distribution of the heat transfer coefficient. By using the method mentioned above, the following conclusions are obtained from the present experiment. The boundary layer is thinned in the regions where the secondary flow is directed toward the wall and thickened where it is directed away from the wall. The peak augmentation of the local heat transfer coefficient occurs in the downwash region near the point of minimum boundary-layer thickness. Streamwise distributions of averaged Stanton number on the measurement planes show very similar trends for all the cases(${\beta}=20^{circ},\;30^{\circ}\;and\;45^{\circ}$).

• 대한기계학회논문집B
• /
• 제24권2호
• /
• pp.298-305
• /
• 2000

The flow characteristics and the heat transfer rate on a surface by interaction of a pair of vortices were studied experimentally. The test facility consisted of a boundary-layer wind tunnel with a vortex introduced into the flow by half-delta wings protruding from the surface. In order to control the strength of the longitudinal vortices, the angles of attack of the vortex generators were varied from - 20 degree to - 45 degree, but spacings between the vortex generators were fixed to 4 cm. The 3-dimensional mean velocity measurements were made using a five-hole pressure probe. Heat transfer measurements were made using the thermochromatic liquid to provide the local distribution of the heat transfer coefficient. Unlike common flow down, common flow up vortices moved toward the centerline as they developed and interacted strongly with each other but not with the boundary layer. Spanwise profiles of Stanton number were similar for ${\beta}=-20^{\circ}\;and\;-35^{\circ}$, but not similar for ${\beta}=-45^{\circ}$. The case of ${\beta}=-20^{\circ}\;and\;-35^{\circ}$ showed the two peak Stanton number, but the case of ${\beta}=-45^{\circ}$ showed the only one peak Stanton number.

• 한국항공우주학회지
• /
• 제40권5호
• /
• pp.385-394
• /
• 2012

아음속-초음속 패널법(panel method)을 이용하여 항공기의 정적 안정성 미계수와 동적 안정성 미계수 및 조종미계수를 예측할 수 있는 프로그램을 개발하였다. 사용된 코드는 아음속-초음속 소스(source)와 말굽 와류(elementary horse shoe vortex)의 분포를 사용하고, 그 분포의 크기는 얇은 물체 근사(thin body approximation)을 적용하여 간략히 한 경계 조건을 이용하여 계산하였다. 항공기에 부착된 물체 좌표계에서 준정상(quasi-steady) 해석을 통해서 항공기 3축의 댐핑 계수를 예측하였다. 개발된 코드는 삼각날개(delta-wing)의 중립점(neutral point), 롤, 피치 댐핑 계수의 이론치와 비교하여 검증하였다. 마지막으로 F-18의 정적, 동적 안정성 미계수와 조종 미계수를 풍동 시험치와 계산치에 비교하여 개발한 코드의 정확성과 유용성을 확인하였다.

• International Journal of Aeronautical and Space Sciences
• /
• 제16권1호
• /
• pp.8-18
• /
• 2015

A numerical simulation for a nonslender BWB UCAV configuration with a rounded leading edge and span of 1.0 m was performed to analyze its aerodynamic characteristics. Numerical results were compared with experimental data obtained at a free stream velocity of 50 m/s and at angles of attack from -4 to $26^{\circ}$. The Reynolds number, based on the mean chord length, is $1.25{\times}106$. 3D multi-block hexahedral grids are used to guarantee good grid quality and to efficiently resolve the boundary layer. Menter's shear stress transport model and two transition models (${\gamma}-Re_{\theta}$ model and ${\gamma}$ model) were used to assess the effect of the laminar/turbulent transition on the flow characteristics. Aerodynamic coefficients, such as drag, lift, and the pitching moment, were compared with experimental data. Drag and lift coefficients of the UCAV were predicted well while the pitching moment coefficient was underpredicted at high angles of attack and influenced strongly by the selected turbulent models. After assessing the pressure distribution, skin friction lines and velocity field around UCAV configuration, it was found that the transition effect should be considered in the prediction of aerodynamic characteristics of vortical flow fields.