• Journal of Chest Surgery
• /
• v.34 no.10
• /
• pp.775-780
• /
• 2001

We report a case of the successful anatomical correction of the Taussig-Bing anomaly associated with the interrupted aortic arch and intramural left coronary artery for an 38 day-old infant Aortic arch and neoaortic reconstructions were conducted without any prosthetic or pericardial patch. Intramural left coronary was separated from right one after partial detachment of aortic commissure and both coronary artery buttons were transferred separately to the proximal main pulmonary artery(nee-aorta). Delayed sternal closure was done 3 days after the operation and hospital discharge was delayed for a month because of postoperative pneumonia. Now he is 5 months old and free of symptoms and cardiac drugs.

• Proceedings of the KWS Conference
• /
• 2002.10a
• /
• pp.675-680
• /
• 2002

Cracking and bulging in welded and internally lined pressure vessels that work in thermal-mechanical cycling service have been well known problems in the petrochemical, power and nuclear industries. However, published literature and industry surveys show that similar problems have been occurring during the last 50 years. A better understanding of the causes of cracking and bulging causes is needed to improve the reliability of these pressure vessels. This study attempts to add information required for increasing the knowledge and fundamental understanding required. Typical examples of this problem are the coke drums in the delayed coking units refinery process. This case was selected for experimental work, field study and results comparison. Delayed coking units are among the refinery units that have higher economical yields. To shut down these units represents a high negative economical impact in refinery operations. Also, the maintenance costs associated with repairs are commonly very high. Cracking and bulging occurrences in the coke drums, most often at the weld areas, characterize the history of the operation of delayed coking units. To design and operate more robust coke drums with fewer problems, an improved metallurgical understanding of the cracking and bulging mechanisms is required. A methodology that is based field experience revision and metallurgical analyses for the screening of the most important variables, and subsequent finite element analyses to verify hypotheses and to rank the variables according to their impact on the coke drum lives has been developed. This indicated approach provides useful information for increasing coke drum reliability. The results of this work not only order the most important variables according to their impact in the life of the vessels, but also permit estimation of the life spans of coke drums. In conclusion, the current work shows that coke drums may fail as a combination of thermal fatigue and other degradation mechanisms such as: corrosion at high and low temperatures, detrimental metallurgical transformations and plastic deformation. It was also found that FEA is a very valuable tool for understanding cracking and bulging mechanisms in these services and for ranking the design, fabrication, operation and maintenance variables that affect coke drum reliability.

• Archives of Plastic Surgery
• /
• v.38 no.4
• /
• pp.531-534
• /
• 2011

Purpose: The rectus abdominis myocutaneous flap is currently the most commonly used donor site of immediate and delayed breast reconstruction surgery, for its versatility and ease of handling, as well as sufficient blood supply. Despite many advantages of rectus abdominis flap, morbidity of donor site is considered as inevitable shortcoming. The authors recently faced a devastating complication, small bowel obstruction that led to strangulation, after delayed breast reconstruction with free transverses rectus abdominis myocutaneous (TRAM) flap. And we would like to report it, because abdominal pain after TRAM flap is a common symptom and can be overlooked easily. Methods: A 56-year-old female patient who had history of receiving total abdominal hysterectomy 20 years ago underwent delayed breast reconstruction with TRAM flap transfer. She complained abdominal discomfort and pain from third postoperative day, postoperative small bowel obstruction that arose from strangulated bowel and prompt emergency operation was done. Results: After resection of the strangulated bowel and reanastomosis, quickly her symptoms were relieved, and there were no further problems during her hospital stay. 7 days after her emergency operation she was discharged. Conclusion: In patients with previous abdominal surgical history, prolonged ileus can lead to bowel strangulation, so surgeons should always consider the possibility, and must be aware of abdominal symptoms in patients who receive free TRAM flap operations.

• Journal of Korea Spatial Information System Society
• /
• v.11 no.2
• /
• pp.133-142
• /
• 2009

Recently, with the advance of wireless internet and the frequent use of mobile devices, demand for LBS(Location Based Service) is increasing, and research is required on spatial indexes for the storage and maintenance of spatial data to provide efficient LBS in mobile device environments. In addition, the use of flash memory as an auxiliary storage device is increasing in order to store large spatial data in a mobile terminal with small storage space. However, the application of existing spatial indexes to flash-memory lowers index performance due to the frequent updates of nodes. To solve this problem, research is being conducted on flash-memory based spatial indexes, but the efficiency of such spatial indexes is lowered by low utilization of buffer and flash-memory space. Accordingly, in order to solve problems in existing flash-memory based spatial indexes, this paper proposed FR-Tree (Flash-Memory based R-Tree) that uses the node compression technique and the delayed write operation technique. The node compression technique of FR-Tree increased the utilization of flash-memory space by compressing MBR(Minimum Bounding Rectangle) of spatial data using relative coordinates and MBR size. And, the delayed write operation technique reduced the number of write operations in flash memory by storing spatial data in the buffer temporarily and reflecting them in flash memory at once instead of reflecting the insert, update and delete of spatial data in flash-memory for each operation. Especially, the utilization of buffer space was enhanced by preventing the redundant storage of the same spatial data in the buffer. Finally, we perform ed various performance evaluations and proved the superiority of FR-Tree to the existing spatial indexes.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.12 no.2
• /
• pp.168-174
• /
• 2012

This paper describes a novel global on-chip interconnect scheme, in which a one UI-delayed symbol as well as the current symbol is sent for easing the sensing operation at receiver end. With this approach, the voltage swing on the channel for reliable sensing can be reduced, resulting in performance improvement in terms of power consumption, peak current, and delay spread due to PVT variations, as compared to the conventional repeater insertion schemes. Evaluation for on-chip interconnects having various lengths in a 130 nm CMOS process indicated that the proposed on-chip interconnect scheme achieved a power reduction of up to 71.3%. The peak current during data transmission and the delay spread due to PVT variations were also reduced by as much as 52.1% and 65.3%, respectively.

• Journal of Biosystems Engineering
• /
• v.40 no.2
• /
• pp.95-101
• /
• 2015

Purpose: During the start-up period, the response time of a hydraulic system increases in the winter because of the increased oil viscosity caused by the cold weather. The problems of delayed tractor starting and excessive wear of the clutch disk occur for these reasons. Therefore, this study develops an analysis model using the commercial hydraulic analysis program AMESim to examine the characteristics of delays in power shuttle starting at different oil temperatures. Methods: In the experiment, a tractor was stationary on a flat surface with the engine running at a constant speed of 1,080 rpm. The forward lever was then pressed to activate the power shuttle at three different oil temperatures, and the pressure changes were measured. The pressure on the forward clutch control valve was measured by a pressure gauge installed on the hydraulic line supplied to the transmission from the main valve. An analysis model was also developed and verified with actual tests. Results: The trend of the simulated pressures of the power shuttle is similar to that of the measured pressures, and a constant modulation period was observed in both the simulation and test results. However, the difference found between the simulation and test results was the initial pressure required to overcome the initial force of the clutch spring. Conclusions: This study also examines the characteristics of the delayed startup of the power shuttle at different oil temperatures through simulations.

• Journal of Astronomy and Space Sciences
• /
• v.34 no.4
• /
• pp.281-288
• /
• 2017

The first Korea lunar orbiter, Korea Pathfinder Lunar Orbiter (KPLO), has been in development since 2016. After launch, the KPLO will execute several maneuvers to enter into the lunar mission orbit, and will then perform lunar science missions for one year. Among these maneuvers, the lunar orbit insertion (LOI) is the most critical maneuver because the KPLO will experience an extreme velocity change in the presence of the Moon's gravitational pull. However, the lunar orbiter may have a delayed LOI burn during operation due to hardware limitations and telemetry delays. This delayed burn could occur in different captured lunar orbits; in the worst case, the KPLO could fly away from the Moon. Therefore, in this study, the burn delay for the first LOI maneuver is analyzed to successfully enter the desired lunar orbit. Numerical simulations are performed to evaluate the difference between the desired and delayed lunar orbits due to a burn delay in the LOI maneuver. Based on this analysis, critical factors in the LOI maneuver, the periselene altitude and orbit period, are significantly changed and an additional delta-V in the second LOI maneuver is required as the delay burn interval increases to 10 min from the planned maneuver epoch.

• Nuclear Engineering and Technology
• /
• v.41 no.6
• /
• pp.813-820
• /
• 2009

A rapid pneumatic transfer system (PTS) for an instrumental neutron activation analysis (INAA) is developed as an automatic irradiation facility involving the measurement of a short half-life nuclide and a delayed neutron counting system. Three new PTS designs with improved functions were constructed at the HANARO research reactor in 2006. The new system is composed of a manual system and an automatic system for both an INAA and a delayed neutron activation analysis (DNAA). The design and basic conception of a modified PTS are described, and the functions of system operation and control, radiation protection and emissions of radioactive gas are improved. In addition, a form of capsule transportation of these systems is tested. The experimental results pertaining to the irradiation characteristics with variation of the neutron flux and the temperature of the irradiation position with the irradiation time are presented, as is an analysis of the reference material for analytical quality control and uncertainty assessments.

• The Korean Journal of Pain
• /
• v.9 no.1
• /
• pp.283-287
• /
• 1996

Recently, continuous epidural catheter insertion is usually employed in operation and chronic pain control. Delayed migration of an extradural catheter into subdural space or subarachnoid space is a rare but life threatening complication of continuous epidural catheter insertion, especially with out patients. The symptoms may include lower extremity weakness, hypotension, drowsy and respiratory depression. We experienced two cases of lower extremity paralysis due to delayed migration into subdural or subarachnoid spaces at our pain clinic. The tecnical procedures for continuous epidural catheterization went smoothly without any complications. However, clinical signs of lower extremity paralysis and sensory loss developed gradually, about 2 hours and 30 minutes after the continuous epidural injection. Two cases were confirmed by subdurogram and myelogram.

• Korean Journal of Optics and Photonics
• /
• v.10 no.3
• /
• pp.233-236
• /
• 1999

We have constructed a narrow-linewidth single-longitudinal-mode unidirectional $Er^{3+}$ -doped fiber laser using a fiber Bragg grating incorporated by a three port optical circulator with a compact configuration. Using a conventional delayed self-heterodyne detection technique with Mach-Zehnder interferometer a linewidth of 5 kHz was measured. In a single-longitudinal-mode operation, output power of up to 2.7 mW at 1548 nm were obtained for a launched pump power of 43 mW at 980 nm.