• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.66 no.1
• /
• pp.72-79
• /
• 2021

The increasing use of deicing salts has caused various environmental problems, including crop damage along the motorway where deicing salts are sprayed during winter. Deicing salts used on roads have been reported to negatively affect crops, but little information is known about their impact on crops. A seedling emergence assay was conducted to evaluate the effects of deicing salts on crops using oilseed rape (Brassica napus) as a model plant. We tested five chloride deicing salts consisting of NaCl, CaCl2, or MgCl2 and 1 non-chloride deicing salt (SM-3) at a range of concentrations (25, 50, 100, 200, and 400 mM), and untreated control. Regardless of deicing salts, they significantly delayed and reduced seedling emergence of oilseed rape with increasing salt concentration. Non-linear regression analysis of seedling emergence with a range of salt concentrations by fitting to the log-logistic model revealed that the chloride deicing salts reduced seedling emergence more than the non-chloride deicing salt SM-3. The GR50 value, the concentration causing 50% seedling emergence, of SM-3 was 47.1 mM, while those of the chloride deicing salts ranged from 30.7 mM (PC-10) to 37.5 mM (ES-1), showing approximately 10 mM difference between non-chloride and chloride deicing salts. Our findings suggest that seedling emergence assay is a useful tool to estimate the potential damage caused by deicing salts on crops.

• Ecology and Resilient Infrastructure
• /
• v.8 no.1
• /
• pp.64-78
• /
• 2021

This study was conducted to find out the effect of the construction and operation of river-crossing structures on the habitat landscape characteristics in the Geum-gang River, South Korea. A total of three study reaches were selected in the downstream of the Daecheong Dam: the Buyong-ri reach, which is a control that is not affected by the construction and operation of the weir of the Four Rivers Project and Sejong-bo Weir reach and Gongju-bo Weir reach of the upper and lower sections of each weir that are affected by the weir construction and operation. The habitat type was classified, and then the structural characteristics of the landscape were analyzed using aerial photographs taken before and after the construction of the Daecheong Dam, before and after the construction of the weir, and before and after the weir gate operation. After the construction of Daecheong Dam in Geum River, the area of the bare land greatly decreased, and the area of grassland and woodland increased in the downstream of the dam. In addition, the patch number in the river landscape increased, the patch size decreased, and the landscape shape index and the habitat diversity increased. Therefore, after the construction of the dam, the bare land habitat was changed to a vegetated habitat, and the habitat was fragmented and diversified in the downstream of the dam. After the construction of the weirs, the area of open water increased by 18% in the Sejong-bo reach and by 90% in the Gongju-bo reach, and the landscape shape index of the open water decreased by 32% in the Sejong-bo reach and by 35% in the Gongju-bo reach, and the habitat diversity index decreased to 25% in the Sejong-bo reach and to 24% in the Gongju-bo reach. Therefore, the open water habitat was expanded, the shape of the habitat was simplified, and the habitat diversity decreased according to the construction of the weirs. After water-gate opening of the weir, the bare land that disappeared after the construction of the weir reappeared, and the landscape shape index and habitat diversity index increased in both terrestrial and open water habitats. Therefore, it was found that the landscape characteristics of the river habitats were restored to the pre-construction of the weir by the operation of the weir gate. The effect of weir gate opening was delayed in the downstream than in the upstream of the weir. Although the characteristics of the landscape structure in the river habitat changed due to the construction of the river-crossing structures, it is thought that proper technology development for the ecological operation of the structures is necessary as the habitat environments can be restored by the operation of these structures.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.25 no.2
• /
• pp.29-34
• /
• 2021

Purpose Sample reception environment system in nuclear medicine has not changed much compared to 20 years ago. When preparing sample for in vitro test, there was no significant change because the test was carried out by generating an own specimen from the parent specimen. In this study, We would like to introduce a method that automatically removes the sample cap using the automated decapper equipment and enables automatic reception at the same time. In addition, including a provisional reception system. Materials and Methods In 2019, it was intended to get a device that automatically removes the cap of a patient's blood sample. This equipment is the same as the equipment used in the Department of Laboratory Medicine (Vacuette Ⓡ Unicap Belt Decapper, Greiner bio-one, Austria). However, the purchase was delayed due to differences in tube size, budget, and space. In January 2020, we borrowed domestic automatic decapper equipment and modified it to suit our laboratory environment. After 9 months, we were able to introduce a system that automatically removes the lid of a patient's blood sample and at the same time automatically accepts the test. And, through the provisional reception system, it was possible to know the arrival of the specimen in a short time. Results With the use of an automatic decapper device, the sample cap was automatically removed, and the reception proceeded at the same time. So, it was very efficient at work because it shortened the sample preparation time by about 20 minutes. In addition, it was possible to prevent the examiner's musculoskeletal disorders caused by repeated wrist use. After using the provisional reception system, patients were able to be discharged quickly, and the number of phone calls to confirm the arrival of samples was reduced. Conclusion Most hospitals have about four employees in the nuclear medicine in vitro laboratory. It is effective to use automatic decapper equipment and a provisional reception system for organizations that perform work with the minimum number of personnel.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.66 no.4
• /
• pp.419-427
• /
• 2021

In South Korea, direct seeding of rapeseed (Brassica napus L.) is difficult during spring cultivation in early March because of the low yield production associated with late flowering and poor seed quality. To compare the period of direct sowing, the present study investigated the growth characteristics of rapeseed according to planting dates. Specifically, 35 day-old seedlings were transplanted or directly sown on four different dates (late February, early March, late March, and early April) in 2020 and 2021. As the planting date was delayed, the days to flowering of rapeseed decreased. Similarly, the plant height, seed set percentage, and seed yield of rapeseed were reduced upon delay in planting. The seed yield of rapeseed through direct seeding in late February was the highest, 2.76 ton·ha^-1. On all seeding dates, except for late February, the transplanted rapeseed produced a higher yields than the directly seeded rapeseed. The crude oil and oleic acid content, which is related to the quality of rapeseed, decreased with the delay in planting dates, and this decrease was greater, with the direct seeding of rapeseed depending on the sowing time. In the correlation analysis, the planting date was significantly and negatively correlated with the yield, crude oil content, and oleic acid content of the transplanted rapeseed, while the sowing date was negatively correlated with the plant height, silique size, yield, and seed quality of the directly seeded rapeseed. Finally, the effect of planting date on rapeseed growth was stronger in direct seeding than in transplanting. Therefore, during spring cultivation after late February to early March, transplanting, rather than direct seeding, in more advantageous in terms of seed quality and yield.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.66 no.4
• /
• pp.279-288
• /
• 2021

Low-density transplanting is a cultivation technology that reduces labor and production costs. In this study, the growth and yield of several varieties with different tillering characteristics were analyzed in order to establish an appropriate planting density for low-density transplanting. Varieties with Low-Tillering (LT), Medium-Tillering (MT), and High-Tillering (HT) were planted at a density of 37-80 hills/3.3 m². As the planting density decreased, the number of tillers per hill increased, but the number of tillers per square meter of hill decreased, especially for the LT variety. Decreasing density extended the tillering stage, which was longest in the LT variety. As the planting density decreased, SPAD(Soil plant analysis development, chlorophyll meter) values just before heading increased while canopy light interception decreased. Such changes were much greater in the LT variety than in the MT and HT varieties. The heading date tended to be delayed by 0-2 days as the planting density decreased, and there was no difference in the length of the period from first heading to full heading. As the number of spikelets per panicle increased, the number of spikelets per square meter did not differ according to the planting density. Decreasing planting density did not affect the grain weight; nevertheless, the yield ultimately decreased because of the decreasing ripening rate. The optimal planting density for stable low-density transplanting cultivation was determined to be over 50 hills/3.3 m2. In addition, these results suggest that LT varieties should be avoided, since these showed large decreases in growth and yield with decreasing planting density.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.42 no.2
• /
• pp.79-88
• /
• 2022

This study was conducted to evaluate the productivity of whole crop silage wheat utilizing the paddy fields during a couple of years from 2019 to 2021 in Suwon, Korea. This investigation was used the two maturity types of wheat cultivar 'Cheongwoo' (early) and 'Taeu' (late). The heading date of 2^nd year (Oct. 2020 to May. 2021) cultivation was delayed about 11 to 13 days by more than 1^st year (Oct. 2019 to May. 2020). The growth characteristics were shown that the plant height was increased in 2^nd cultivation, while the number of culms and the panicle part ratio were decreased. Moreover, the nutritive value of 'Cheongwoo' and 'Taeu' were also decreased in 2^nd cultivation. These changes have thought to a difference of the precipitation by cultivation years. Because, the precipitation during the period from the end of winter dormancy to the harvesting stage in 2^nd (337 mm) cultivation was more about twice than 1st (169.3 mm) cultivation. However, the dry matter yield of 'Cheongwoo' was not shown a statistical difference by cultivation years, while 'Taeu' was shown to decrease tendency. The total dry matter yield regardless of the cultivation years were higher in 'Cheongwoo' than 'Taeu', and especially 'Cheongwoo' was more 3 tons per hectare (15.3 t/ha) than 'Taeu' (12.6 t/ha) at 2^nd cultivation (p<0.01). The trend of dry weight in 'Cheongwoo', early mature type, showed a relatively high ratio of dry matter (p<0.05) was considered that due to a high panicle ratio by a fast heading and an adequate weight of panicles by a sufficient maturing. In conclusion, selecting the early maturity cultivars could achieve a higher and more stable total dry matter yield considering the cropping system in the central region. Furthermore, it also has the advantage of being able to double-cropping system with forage rice, which has considered the maximum whole-crop forage production year-round. These results suggest that the 'Cheongwoo' be optimum cultivar to produce the year-round forage on paddy fields in the central region.

• Journal of the Korean Orthopaedic Association
• /
• v.56 no.1
• /
• pp.26-33
• /
• 2021

Purpose: This study evaluated the results of dual plate fixation for periprosthetic femur fracture after total knee arthroplasty (TKA). Materials and Methods: From October 2007 to February 2013, 23 cases of periprosthetic femur fracture after TKA were treated at the author's hospital. There were 13 cases of fixation using a medial and lateral dual plate when the stability of the fracture site could not be achieved by one side fixation with a follow-up of more than one year. The cases included no loosening of the femoral component in fractures that were categorized as Lewis-Rorabeck classification II and supracondylar comminuted fractures and elongation of the fracture line to the lateral epicondyle of the femur or stem in the medullary canal. The mean age was 72 years (65-82 years), and 11 cases were female. Three cases had a stem due to revision. The mean bone marrow density was -3.2 (-1.7 to -4.4), and the mean period from primary TKA to periprosthetic fractures was 28 months (1-108 months). The mean follow-up period was 23 months (12-65 months). The medial fracture site was first exposed via the subvastus approach. Second, the supplementary plate was fixed on the lateral side of the fracture using a minimally invasive plate osteosynthesis technique. The average union time, complications, and Hospital for Special Surgery Knee Score (HSS) at the last follow-up were evaluated. Results: The mean union time was 17.4 weeks (7-40 weeks). Two cases showed delayed bone union and nonunion occurred in one case, in whom bone union was achieved three months later after re-fixation using a dual plate with an autogenous bone graft. The mean varusvalgus angulation was 1.67 degrees (-1.2-4.9 degrees), and the mean anterior-posterior angulation was 2.86 degrees (0-4.9 degrees) at the last follow-up. The mean knee range of motion was 90 degrees, and the HSS score was 85 points (70-95 points) at the last follow-up. Conclusion: Dual plate fixation for periprosthetic femur fractures that had not achieved stability by one side plate fixation after TKA showed a good clinical result that allowed early rehabilitation.

• Journal of Bio-Environment Control
• /
• v.31 no.4
• /
• pp.356-365
• /
• 2022

Agrivoltaic systems, also called solar sharing, stated from an idea that utilizes sunlight above the light saturation point of crops for power generation using solar panels. The agrivoltaic systems are expected to reduce the incident solar radiation, the consequent surface cooling effect, and evapotranspiration, and bring additional income to farms through solar power generation by combining crops with solar photovoltaics. In this study, to evaluate if agrivoltaic systems are suitable for viticulture, we investigated the microclimatic change, the growth of vines and the characteristics of grape grown under solar panels set by planting lines compared with ones in open vineyards. There was high reduction of wind speed during over-wintering season, and low soil temperature under solar panel compared to those in the open field. There was not significant difference in total carbohydrates and bud burst in bearing mother branches between plots. Despite high content of chlorophyll in vines grown under panels, there is no significant difference in shoot growth of vines, berry weight, cluster weight, total soluble solid content and acidity of berries, and anthocyanin content of berry skins in harvested grapes in vineyards under panels and open vineyards. It was observed that harvesting season was delayed by 7-10 days due to late skin coloration in grapes grown in vineyards under panels compared to ones grown in open vineyards. The results from this study would be used as data required in development of viticulture system under panel in the future and further study for evaluating the influence of agrivoltaic system on production of crops including grapes.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.67 no.3
• /
• pp.180-188
• /
• 2022

This study was conducted to determine the optimal sowing date for seed yield of summer oat (Avena sativa L.) cultivars "Darkhorse (DH)" and "Highspeed (HS)" in Wanju, Jeonbuk province between 2017 and 2018. We investigated seed yield from 4 sowing dates: July 15, July 30, August 15, and August 30. We evaluated the agronomic characteristics of summer oats (DH and HS). We found the heading date of all cultivars to be within 50 days. Delayed sowing resulted in significantly increased plant height for both years and cultivars. There was no significant difference in spike length of DH and HS which ranged from 12.8 to 17.8 cm. The sowing date of July 30 produced a higher number of grains per spike, but this yield differed significantly by year and cultivars. In 2017, the first sowing resulted in the lowest DH yield at 132 kg per 10a, while the second sowing had the highest yield at 227 kg. HS yield was the lowest in the first sowing at 126 kg and the highest in the third sowing at 219 kg. In 2018, DH had the lowest yield from the first sowing at 184 kg per 10a, and the highest from the second sowing at 240 kg, but there was no significant difference between these yields. The first sowing for HS gave the lowest yield at 160 kg, and the second sowing produced the highest at 258 kg. The germination rate of harvested seeds from each sowing date in 2017 and 2018 was found to be higher than 85% and there was no significant difference between the two cultivars in the 2018 germination rate test. Thus, we found the optimal sowing date for summer cultivation of oats for the highest seed yield to be between July 30 (second sowing) and August 15 (third sowing).

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.27 no.3
• /
• pp.268-275
• /
• 1982

This study was conducted to obtain basic informations for breeding and improving cultural practices of sesame (Sesamum indicum L.) through investigation of several agronomic characters of 82 major varieties plants in April 20, May 15 and June 20. Stem diameter and plant height were largest in early planting(April 20). On the contrary, they were smallest in late planting(June 15). Therefore, the later planting, the poorer the vegetative growth on the basis of stem diameter and plant height. Number of capsules per plant and number of grains per capsule were 88 and 54, respectively, in the early planting, while they were decreased to 25 capsules and 40 grains in late planting. The percentage of ripeness and 1000 grain weight 78 and 2.3g in the April 20planting while they were 58% and 2.1g in June 20 planting indicating the later planting, the lower the ripeness. Grain yield per m1 in April 20 and June 20 planting was 112 and 18g respectively. Consequently, grain yield significantly decreased as planting delayed. On the basis of the vegetative and reproductive growth, varieties could be classified into early, conventional, late and indetermediate planting adapted groups. The major yield components were highly and postively correlated with accmulated sunshine hours and temperatures confirming that grain yield was closely related with sunshine and temperature. Among the varieties tested, Gurye and Local 135 had more than 150 capsules. Haenam and Woogang had more than 75 grains per capsule. Since grain yield oflate planted sesame were significantly different among the varieties, breeding of sesame for after barly cropping would be more effective under late cultural condition of after barly.