• 한국음향학회지
• /
• 제20권8호
• /
• pp.58-66
• /
• 2001

본논문에서는 LFM (Linear Frequency Modulated) 신호를 사용하는 능동소나에서 적은 연산량으로 표적반사신호의 시간지연과 도플러를 추정하는 기법을 제안하였다. 제안한 기법에서는 일반적인 추정기법들이 가지는 연산량의 문제를 해결하기 위해 LFM 신호의 상호모호함수 (cross ambiguity function)에서 시간지연과 도플러의 관계를 나타내는 대수적인 관계식을 이용하였다. FML (Fast Maximum Likelihood) 기법을 기반으로 하여 시간지연과 도플러의 대수적 관계식을 유도하였으며, 이를 이용하여 일반적인 2차원 탐색 대신 2번의 1차원 탐색으로 시간지연과 도플러를 추정하였다. 다양한 신호대 잡음비 (SNR)에서 제안한 알고리즘의 추정오차를 분석하였으며, 제안한 알고리즘이 우수한 추정 성능을 보임을 확인하였다.

• International Journal of Computer Science & Network Security
• /
• 제23권7호
• /
• pp.1-8
• /
• 2023

An Orthogonal Frequency Division Multiplexing (OFDM) based wireless communication system has drawn wide attention for its high transmission rate and high spectrum efficiency in not only radio but also Underwater Acoustic (UWA) applications. Because of the narrow sub-carrier spacing of OFDM, orthogonality between sub-carriers is easily affected by Doppler effect caused by the movement of transmitter or receiver. Previously, Doppler compensation signal processing algorithm for Desired propagation path was proposed. However, other Doppler shifts caused by delayed Undesired signal arriving from different directions cannot be perfectly compensated. Then Receiver Bit Error Rate (BER) is degraded by Inter-Carrier-Interference (ICI) caused in the case of Multi-path Doppler channel. To mitigate the ICI effect, a modified Delay and Doppler Profiler (mDDP), which estimates not only attenuation, relative delay and Doppler shift but also sampling clock shift of each multi-path component, is proposed. Based on the outputs of mDDP, an ICI canceling multi-tap equalizer is also proposed. Computer simulated performances of one-tap equalizer with the conventional Time domain linear interpolated Channel Transfer Function (CTF) estimator, multi-tap equalizer based on mDDP are compared. According to the simulation results, BER improvement has been observed. Especially, in the condition of 16QAM modulation, transmitting vessel speed of 6m/s, two-path multipath channel with direct path and ocean surface reflection path; more than one order of magnitude BER reduction has been observed at CNR=30dB.

• 한국군사과학기술학회지
• /
• 제19권5호
• /
• pp.582-589
• /
• 2016

Multi-mode monopulse system is widely used for satellite terminal like UAV because of high tracking accuracy and low size/weight profile. In order to calculate tracking error, Multi-mode monopulse system utilizes high-order mode signal, and it should have enough C/N(carrier to noise) level therefore tracking system needs narrow band filtering of received satellite beacon signal as much as possible. However, UAV suffers for beacon frequency drift derived from Doppler effect due to satellite figure 8 movement and UAV maneuvering. Therefore wideband signal processing needs to be considered in advance for exact doppler compensation and consequent time delay. In this paper, we propose the multi-stage Digital Signal processing system for beacon signal, which could minimize the signal delay under high Doppler and low C/N condition.

• 대한전자공학회논문지TC
• /
• 제46권6호
• /
• pp.48-55
• /
• 2009

궤환 간섭 채널은 송신 안테나와 수신 안테나가 동일 지점에 고정되어 있고 주위에 있는 이동하는 물체와 고정된 물체에 의해 형성된 다중경로를 통해 발생하는 채널로, 일반적인 기지국과 이동국의 채널 모델과는 다른 특성을 가지고 있다. 본 논문에서는 시외 지역과 고속도로변에서 궤환 간섭 채널을 측정하고, 채널의 특성 파라미터의 분석 방법에 대하여 기술한다. 측정된 표본을 통해 산란함수, 지연 전력 스펙트럼, 도플러 전력 스펙트럼을 구하였고, coherence 대역폭, coherence 시간, 최대 초과 지연, 평균 초과 지연, rms 지연 확산, 도플러 천이, 도플러 확산, 확산 계수 이상 8가지 파라미터의 결과와 지연과 도플러의 누적 분포도로 채널을 분석하였다. 많은 것들이 관찰되었지만, 주목할 점으로는 고속도로변은 고속으로 이동하는 차량에 의해 높은 도플러 주파수와 에너지가 큰 궤환 신호가 발생하고, 시외 지역은 차량의 소통이 적어 낮은 도플러 주파수가 발생한다는 것이다.

• 한국전자파학회논문지
• /
• 제28권6호
• /
• pp.444-451
• /
• 2017

본 논문에서는 고속 데이터 송수신을 위해 2차원 iDFT(inverse Discrete Fourier Transform) 및 DFT(Discrete Fourier Transform) 연산을 이용하여 Delay-Doppler 스프레딩 영향을 고속 수신 처리하는 OTFS(Orthogonal Time Frequency Space) 변조 시스템과 OTFS-MIMO(Multiple Input Multiple Output) 시스템을 평가하고 분석한다. 특히 OTFS 변조를 사용하는 MIMO 시스템은 높은 Doppler 효과가 존재하는 채널에서도 시스템의 용량 저하가 거의 없이 모든 데이터 스트림을 전송할 수 있다. 시뮬레이션 결과, $1{\times}1$ OTFS 변조 시스템의 전송률은 $2{\times}2$ OTFS-MIMO 시스템에서 한 스트림의 전송률과 유사함을 확인할 수 있다. 즉, $2{\times}2$ OTFS-MIMO 시스템은 높은 Delay-Doppler 영향이 존재하는 환경에서도 $1{\times}1$ OTFS 변조 시스템과 비교하여 거의 2배의 전송률을 확보할 수 있음을 확인할 수 있다.

• International Journal of Computer Science & Network Security
• /
• 제23권9호
• /
• pp.8-16
• /
• 2023

In Japan, high-speed ground transportation service using linear motors at speeds of 500 km/h is scheduled to begin in 2027. To accommodate 5G services in trains, a subcarrier spacing frequency of 30 kHz will be used instead of the typical 15 kHz subcarrier spacing to mitigate Doppler effects in such high-speed transport. Furthermore, to increase the cell size of the 5G mobile system, multiple base station antennas will transmit identical downlink (DL) signals to form an expanded cell size along the train rails. In this situation, the forward and backward antenna signals are Doppler-shifted in opposite directions, respectively, so the receiver in the train may suffer from estimating the exact Channel Transfer Function (CTF) for demodulation. In a previously published paper, we proposed a channel estimator based on Delay and Doppler Profiler (DDP) in a 5G SISO (Single Input Single Output) environment and successfully implemented it in a signal processing simulation system. In this paper, we extend it to 2×2 MIMO (Multiple Input Multiple Output) with spatial multiplexing environment and confirm that the delay and DDP based channel estimator is also effective in 2×2 MIMO environment. Its simulation performance is compared with that of a conventional time-domain linear interpolation estimator. The simulation results show that in a 2×2 MIMO environment, the conventional channel estimator can barely achieve QPSK modulation at speeds below 100 km/h and has poor CNR performance versus SISO. The performance degradation of CNR against DDP SISO is only 6dB to 7dB. And even under severe channel conditions such as 500km/h and 8-path inverse Doppler shift environment, the error rate can be reduced by combining the error with LDPC to reduce the error rate and improve the performance in 2×2 MIMO. QPSK modulation scheme in 2×2 MIMO can be used under severe channel conditions such as 500 km/h and 8-path inverse Doppler shift environment.

• International Journal of Computer Science & Network Security
• /
• 제23권1호
• /
• pp.96-102
• /
• 2023

In this paper, we proposed Channel Transfer Function estimation based on Delay and Doppler Profile for underwater acoustic OFDM communication system. It improved the estimation accuracy of the channel transfer function by linear time interpolation the change of Scattered Pilot (SP) insertion frequency in the time direction and the time by Delay and Doppler profile that analyzes the multipath situation of the channel investigated the performance of interpolation by simulation and report it. Previous works is inserted SP every 4 OFDM. It was effective under the environment without multipath, but it has observed that the effect of CTF compensation has been lowered in multipath channel condition. In addition to be better when inserted SP every 2 OFDM. But the amount of sending data will be decrease. Therefore, we conducted research to improve 4 OFDM with new interpolator. A computer simulation was performed as a comparison of SP inserted every 4 OFDM, SP inserted every 2 OFDM, and 4 OFDM with new interpolator. the performance of the proposed system is overwhelmingly improved, and the performance is slightly improved even 64 QAM.

• International journal of advanced smart convergence
• /
• 제9권3호
• /
• pp.137-140
• /
• 2020

Orthogonal time frequency space (OTFS) modulation is considered as one of the solutions to cope with high mobility channel environments. It converts the time-varying channel to the near-constant channel response in the delay-Doppler domain. This modulation scheme also benefits from the diversity in two-dimensional modulation. According to recent researches, this method outperforms the conventional OFDM modulation, especially in high-speed channel conditions. In this paper, to investigate the performance of OTFS in a practical system, channel estimation in the delay-Doppler domain is compared with the conventional method in the time-frequency domain at different mobile speeds. Simulation results confirm that the delay-Doppler domain channel estimation brings a better performance compared to the conventional one under the same overhead rate.

• International Journal of Internet, Broadcasting and Communication
• /
• 제12권3호
• /
• pp.1-8
• /
• 2020

This paper studied a method of estimating target information using a radar in wireless communication. Position information on the target can be estimated angle, distance and velocity. The velocity information can be estimated since the Doppler frequency is changed in the moving target. The signal incident on the receiving array antenna is multiplied by the delay time and the reference signal to represent the output signal. This output signal is estimated by applying FFT (Fast Fourier Transform) after calculating signal correlation through correlation integrator. Since the output signal must be calculated within the correlator, it should be processed with the Dwell time. The correlation signal of the correlation integrator outside this Dwell time is indicated by the velocity measurement error. The FFT is applied to the signal that has passed through the correlated integrator in order to estimate the distance of the signal. The Doppler resolution must be improved because the FFT estimates target information using the Doppler information. The Doppler resolution decreases with increasing the integration time. The velocity information estimation should have no spread of the velocity. As a result of the simulation, there was no spread of the target velocity in this study.

• International Journal of Computer Science & Network Security
• /
• 제23권5호
• /
• pp.121-127
• /
• 2023

A 500 km/h linear motor high speed terrestrial transportation service is planned to launch 2027 in Japan. In order to support 5G service in the train, the Sub-carrier spacing frequency of 30 kHz is planned to be used instead of common 15 kHz sub-carrier spacing to mitigate Doppler effect in such high-speed transportation. In addition, to increase the cell size of 5G mobile system, plural Base Station antenna will transmit the identical Down Link (DL) signal to form the expanded cell size along the train rail. In this situation, forward and backward antenna signals will be Doppler shifted by reverse direction respectively and the receiver in the train might suffer to estimate accurate Channel Transfer Function (CTF) for its demodulation. In this paper, Delay and Doppler Profiler (DDP) based Channel Estimator is proposed and it is successfully implemented in signal processing simulation system. Then the simulated performances are compared with the conventional Time domain linear interpolated estimator. According to the simulation results, QPSK modulation can be used even under severe channel condition such as 500 km/h, 2 path reverse Doppler Shift condition, although QPSK modulation can be used less than 200 km/h with conventional Channel estimator.