• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.5
• /
• pp.1013-1019
• /
• 2016

This paper describes a novel Context-awareness Markov Chain Prediction (CMCP) algorithm based on movement prediction using Markov chain in Delay Tolerant Network (DTN). The existing prediction models require additional information such as a node's schedule and delivery predictability. However, network reliability is lowered when additional information is unknown. To solve this problem, we propose a CMCP model based on node behaviour movement that can predict the mobility without requiring additional information such as a node's schedule or connectivity between nodes in periodic interval node behavior. The main contribution of this paper is the definition of approximate speed and direction for prediction scheme. The prediction of node movement forwarding path is made by manipulating the transition probability matrix based on Markov chain models including buffer availability and given interval time. We present simulation results indicating that such a scheme can be beneficial effects that increased the delivery ratio and decreased the transmission delay time of predicting movement path of the node in DTN.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.24 no.2
• /
• pp.65-70
• /
• 2024

In recent years, research on smart factory wireless mobile communication technology that wirelessly remotely controls utilities is being actively conducted. The Wi-SUN (Wireless Smart Utility Network) Alliance proposed a Wi-SUN protocol structure suitable for building a platform such as a smart factory as a new wireless communication standardization standard based on EEE802.15.4g/e. It analyzes the performance of the IEEE802.15.4e Receiver Initiated Transmission(RIT) Mode Media Access Control (MAC) in terms of throughput and latency, and looks at considerations for efficient operation. RIT mode shows that as the check interval becomes longer, delay time and throughput decrease. It was shown that as the traffic load increases, if the RIT check interval is shortened, the delay time can be shortened and throughput can be increased. RIT mode has the advantage of low power consumption and has neutral characteristics between IEEE802.15.4 and CSL mode in terms of delay time and throughput.

• Proceedings of the KIEE Conference
• /
• 1996.07b
• /
• pp.1005-1008
• /
• 1996

We consider the interval of a gain within which it is guaranteed that a feedback control system is stable. This paper presents the condition under which either a unity feedback control system is stable for a connected gain interval with a proportional compensator cascaded with an open loop forward transfer function. By the connected interval we mean that all the numbers between any two numbers in the connected interval belongs to the connected interval. The condition may be described by a frequency inequality in terms of the denominator and/or numerator of the closed loop transfer function. We also consider the conditions for the discrete-time control systems and the time delay continuous-time control systems. We show that this condition cannot be extended for the transfer function having complex coefficients via a counterexample.

• Journal of Korea Society of Industrial Information Systems
• /
• v.19 no.2
• /
• pp.1-13
• /
• 2014

In IEEE 802.11p/1609-based vehicular networks, vehicles are allowed to exchange safety and control messages only within time periods, called control channel (CCH) interval, which are scheduled periodically. Currently, the length of the CCH interval is set to the fixed value (i.e. 50ms). However, the fixed-length intervals cannot be effective for dynamically changing traffic load. Hence, some protocols have been recently proposed to support variable-length CCH intervals in order to improve channel utilization. In existing protocols, the CCH interval is subdivided into safety and non-safety intervals, and the length of each interval is dynamically adjusted to accommodate the estimated traffic load. However, they do not consider the presence of hidden nodes. Consequently, messages transmitted in each interval are likely to overlap with simultaneous transmissions (i.e. interference) from hidden nodes. Particularly, life-critical safety messages which are exchanged within the safety interval can be unreliably delivered due to such interference, which deteriorates QoS of safety applications such as cooperative collision warning. In this paper, we therefore propose a new interference-aware Dynamic Safety Interval (DSI) protocol. DSI calculates the number of vehicles sharing the channel with the consideration of hidden nodes. The safety interval is derived based on the measured number of vehicles. From simulation study using the ns-2, we verified that DSI outperforms the existing protocols in terms of various metrics such as broadcast delivery ration, collision probability and safety message delay.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.8
• /
• pp.1624-1632
• /
• 2009

In this study, we introduce the design methodology of an optimized Interval Type-2 fuzzy controller. The fixed MF design of type-1 based FLC leads to the difficulty of rule-based control design for representing the linguistically uncertain expression. In the Type-2 FLC as the expanded type of Type-1 FLC, we can effectively improve the control characteristic by using the footprint of uncertainty(FOU) of membership function. Type-2 FLC has a robust characteristic in the unknown system with unspecific noise when compared with Type-1 FLC. Through computer simulation as well as practical experiment, we compare their performance by applying both the optimized Type-1 and Type-2 fuzzy cascade controllers to ball and beam system. To evaluate each controller performance, we consider controller characteristic parameters such as maximum overshoot, delay time, rise time, settling time and steady-state error.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.11
• /
• pp.2923-2931
• /
• 1996

In this paper, the symbol error probability for orthogonal frequency division multiplexing (OFDM) in the multipath fading environment is obtained analytically. In the analysis, OFDM signals with and without the guard interval are considered, and the two-ray fading model is used for the multi-path fading channel. From the analysis results, it is found that the adjacent subchannel interfernce increases the symbol error rate when the guard interval is not employed or shorter than the length of the delay. It is also shown that the adjacent subchannel interference is a Gaussian random variable and its variance depends on the subchannel location and the number of subchannels. Finally, it is found that the variance of the subchannel interference also increases as the power of the signal increases for the OFDM with insufficient guard interval, yieldin an irreducible error at high signal to noise ratio.

• Journal of Astronomy and Space Sciences
• /
• v.34 no.4
• /
• pp.281-288
• /
• 2017

The first Korea lunar orbiter, Korea Pathfinder Lunar Orbiter (KPLO), has been in development since 2016. After launch, the KPLO will execute several maneuvers to enter into the lunar mission orbit, and will then perform lunar science missions for one year. Among these maneuvers, the lunar orbit insertion (LOI) is the most critical maneuver because the KPLO will experience an extreme velocity change in the presence of the Moon's gravitational pull. However, the lunar orbiter may have a delayed LOI burn during operation due to hardware limitations and telemetry delays. This delayed burn could occur in different captured lunar orbits; in the worst case, the KPLO could fly away from the Moon. Therefore, in this study, the burn delay for the first LOI maneuver is analyzed to successfully enter the desired lunar orbit. Numerical simulations are performed to evaluate the difference between the desired and delayed lunar orbits due to a burn delay in the LOI maneuver. Based on this analysis, critical factors in the LOI maneuver, the periselene altitude and orbit period, are significantly changed and an additional delta-V in the second LOI maneuver is required as the delay burn interval increases to 10 min from the planned maneuver epoch.

• Proceedings of the Korean Information Science Society Conference
• /
• 2002.10e
• /
• pp.682-684
• /
• 2002

본 논문에서는 RTP와 TCP가 공존하는 네트워크에서 RTP 패킷의 크기, interval,전송라인의 대역폭, Queue의 크기, delay의 변화에 따라 throughput의 특징에 대하여 알아보기 위해서 ns(network simulator)를 이용하여 RTP, TCP_Reno, TCP_Vegas로 구성된 네트워크를 구성하고 시뮬레이션을 통해서 throughput의 특징 및 원인을 분석했다.

• The KIPS Transactions:PartC
• /
• v.11C no.2
• /
• pp.263-268
• /
• 2004

The end-to-end characteristic Is an important factor for QoS support. Since network users and required bandwidths for applications increase, the efficient usage of networks has been intensively investigated for the better utilization of network resources. The distributed adaptive routing is the typical routing algorithm that is used in the current Internet. The DCLC(Delay Constrained 1.east Cost) path problem has been shown to be NP-hard problem. The path cost of LD path is relatively more expensive than that of LC path, and the path delay of LC path is relatively higher than that of LD path in DCLC problem. In this paper, we investigate the performance of heuristic algorithm for the DCLC problem with new factor which is probabilistic combination of cost and delay. Recently Dr. Salama proposed a polynomial time algorithm called DCUR. The algorithm always computes a path, where the cost of the path is always within 10% from the optimal CBF. Our evaluation showed that heuristic we propose is more than 38% better than DCUR with cost when number of nodes is more than 200. The new factor takes in account both cost and delay at the same time.

• Journal of KSNVE
• /
• v.9 no.5
• /
• pp.1036-1041
• /
• 1999

This paper aims for the development of the high power sonar system for measuring the velocity of a moving object. The high power sonar system transmits two gated 190 kHz sinusoidal signals with 1.6 [ms] time interval to the moving object. Then the sonar system detects and calculates the changed time delay of the reflected ultrasonic signals in order to derive the velocity of the moving object. The transmission part uses a high power amplifier so that 250 W gated sinusoidal signals can be transmitted to the transmitter. 1M RAM is utilized for transmitting and storing of the ultrasonic signals. The time delay is calculted by the cross-correlation technique between the transmitted signals and the received signals. The measured value from the high power sonar system is compared with directly measured values by photo diodes. The result confirms the adjacency to 0.3% error.