• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.5 no.2
• /
• pp.119-123
• /
• 2005

This paper describes a fuzzy-based system for analyzing the stress intensity factors (SIFs) of three-dimensional (3D) cracks. 3D finite element method(FEM) was used to obtain the SIF for subsurface cracks and surface cracks existing in inhomogeneous materials. A geometry model, i.e. a solid containing one or several 3D cracks is defined. Several distributions of local node density are chosen, and then automatically superposed on one another over the geometry model by using the fuzzy theory. Nodes are generated by the bucketing method, and ten-noded quadratic tetrahedral solid elements are generated by the Delaunay triangulation techniques. The singular elements such that the mid-point nodes near crack front are shifted at the quarter-points, and these are automatically placed along the 3D crack front. The complete FE model is generated, and a stress analysis is performed. The SIFs are calculated using the displacement extrapolation method. The results were compared with those surface cracks in homogeneous materials. Also, this system is applied to analyze cladding effect of surface cracks in inhomogeneous materials.

• Proceedings of the KWS Conference
• /
• 2009.11a
• /
• pp.10-10
• /
• 2009

파이프 용접은 중력의 영향으로 인하여 위치에 따라 같은 용접변수라도 비드 형상이 매우 달라 지게 된다. 또한 지금까지 많은 용접 기술자들이 위험하고 까다로운 환경에서 수작업으로 용접을 실행하였다. 따라서 이러한 이유로 용접 자동화 공정이 반드시 필요하게 된다. 본 연구에서는 FCAW를 사용하여 파이프 모재 대신 필릿 평판을 아래보기, 위보기 자세를 포함하여 9개 자세에서 실행하였다. 용접 자세를 비롯한 용접 변수와 비드 형상 변수간의 관계를 비선형 회귀 분석과 구간적 3차 에르미트 보간법을 이용하여 주어진 용접 변수에서의 비드 단면의 형상을 예측하고, 비드의 결함 유무를 파악하였다. 이러한 방법을 통하여 자세에 따라서 용접 결함이 없는 용접 변수를 구할 수 있었다. 시각센서를 이용하여 용접 후 비드 형상에 대해 모니터링을 실시하였다. 모니터링의 알고리즘은 영상획득, 이진화, 세선화, 적응형 미디언 필터링, 적응형 허프 변환, 용접 결함 검출의 순서로 구성되어 있으며, 본 연구에서는 보다 빠른 영상처리를 위하여 적응형 미디언 필터링을 제시하였다. 모니터링을 통하여 2차원 비드 단면뿐만 아니라, 디루니 삼각법을 적용하여 3차원으로 비드 표면을 표현할 수 있다. 보간법을 사용하여 얻은 비드 형상과 시각 센서를 통하여 얻은 비드 형상간의 비교를 통하여 본 연구의 적합성 여부를 확인하였다.

• Korean Journal of Computational Design and Engineering
• /
• v.12 no.4
• /
• pp.255-262
• /
• 2007

In the finite element analysis of forming process, objects are described with a finite number of elements and nodes and the approximated solutions can be obtained by the variational principle. One of the shortcomings of a finite element analysis is that the structure of mesh has become inefficient and unusable because discretization error increases as deformation proceeds due to severe distortion of elements. If the state of current mesh satisfies a certain remeshing criterion, analysis is stopped instantly and resumed with a reconstructed mesh. In the study, a new remeshing algorithm using tetrahedral elements has been developed, which is adapted to the desired mesh density. In order to reduce the discretization error, desired mesh sizes in each lesion of the workpiece are calculated using the Zinkiewicz and Zhu's a-posteriori error estimation scheme. The pre-constructed mesh is constructed based on the modified point insertion technique which is adapted to the density function. The object domain is divided into uniformly-sized sub-domains and the numbers of nodes in each sub-domain are redistributed, respectively. After finishing the redistribution process of nodes, a tetrahedral mesh is reconstructed with the redistributed nodes, which is adapted to the density map and resulting in good mesh quality. A goodness and adaptability of the constructed mesh is verified with a testing measure. The proposed remeshing technique is applied to the finite element analyses of forging processes.

• Annual Conference of KIPS
• /
• 2001.10a
• /
• pp.641-644
• /
• 2001

기존의 종이지도를 수치지도 처리과정으로 얻어진 등고선(contour line) 데이터는 원격탐사(Remote Sensing)와 지리정보시스템(GIS)의 응용분야에서 주로 사용되어지는 데이터이다. 이러한 등고선은 해당 지역의 DTM(Digital Terrain Model) 데이터 생성을 위해 보간(interpolation)하여 생성하는 데 연구가 집중되어 왔다. 본 논문에서는 DEM(Digital Elevation Model)으로부터 얻어진 등고선 데이터를 이용하여 사용자에게 3 차원으로 가시화 해 줄 수 있는 기법을 소개한다. 등고선 추출을 위한 방법으로는 기존의 소개되어진 Marching Square 알고리즘을 적용하였고, 지역적인 최고점(local minimum)과 최소점(maximum)을 구하기 위해 등고선을 열린 등고선(open contour)과 닫힌 등고선(closed contour)으로 분류하게 된다. 지역적 최고, 최소점을 찾기 위한 탐색공간을 줄이기 위해 닫힌 등고선만을 대상으로 등고선 트리를 생성하였으며, 생성된 트리의 리프노드에 대해서 최고, 최소점에 대한 근사(approximation)를 수행하게 된다. 이렇게 구해진 근사된 정점들과 등고선 데이터를 입력으로 하여 제한된 딜로니 삼각분할(Constrained Delaunay Triangulation)을 수행함으로써, 3 차원 지형을 재구성할 수 있다. 실험에서 USGS 로부터 획득한 지형 데이터를 이용하여 속도 측정을 하였다. 결과적으로 저장공간 측면에서 적은 량의 데이터를 가지면서 등고선을 표현할 수 있는 3 차원 지형을 렌더링 할 수 있음을 알 수 있다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.6
• /
• pp.1004-1014
• /
• 2001

The fully automatic algorithm from initial finite element mesh generation to remeshing in two dimensional geometry is introduced using bubble packing method (BPM) for finite element analysis. BPM determines the node placement by force-balancing configuration of bubbles and the triangular meshes are made by Delaunay triangulation with advancing front concept. In BPM, we suggest two node-search algorithms and the adaptive/recursive bubble controls to search the optimal nodal position. To use the automatically generated mesh information in FEA, the new enhanced bandwidth minimization scheme with high efficiency in CPU time is developed. In the remeshing stage, the mesh refinement is incorporated by the control of bubble size using two parameters. And Superconvergent Patch Recovery (SPR) technique is used for error estimation. To verify the capability of this algorithm, we consider two elasticity problems, one is the bending problem of short cantilever beam and the tension problem of infinite plate with hole. The numerical results indicate that the algorithm by BPM is able to refine the mesh based on a posteriori error and control the mesh size easily by two parameters.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.8
• /
• pp.3295-3300
• /
• 2012

Three Dimensional finite element method (FEM) was used to obtain the stress intensity factor for subsurface cracks and surface cracks existing in inhomogeneous materials. A geometry model, i.e. a solid containing one or several 3D cracks is defined. Several distributions of local node density are chosen, and then automatically superposed on one another over the geometry model. Nodes are generated by the bubble packing, and ten-noded quadratic tetrahedral solid elements are generated by the Delaunay triangulation techniques. To examine accuracy and efficiency of the present system, the stress intensity factor for a semi-elliptical surface crack in a plate subjected to uniform tension is calculated, and compared with Raju-Newman's solutions. Then the system is applied to analyze interaction effects of two dissimilar semi-elliptical cracks in a plate subjected to uniform tension.

• Structural Engineering and Mechanics
• /
• v.83 no.3
• /
• pp.353-361
• /
• 2022

Linear Elastic Fracture Mechanics (LEFM) has been developed by applying stress analysis to determine the stress intensity factor (SIF, K). The finite element method (FEM) is widely used as a standard tool for evaluating the SIF for various crack configurations. The prediction accuracy can be achieved by applying an adaptive Delaunay triangulation combined with a FEM. The solution can be solved using either direct or iterative solvers. This work adopts the element-by-element preconditioned conjugate gradient (EBE-PCG) iterative solver into an adaptive FEM to solve the solution to heal problem size constraints that exist when direct solution techniques are applied. It can avoid the formation of a global stiffness matrix of a finite element model. Several numerical experiments reveal that the present method is simple, fast, and efficient compared to conventional sparse direct solvers. The optimum convergence criterion for two-dimensional LEFM analysis is studied. In this paper, four sample problems of a two-edge cracked plate, a center cracked plate, a single-edge cracked plate, and a compact tension specimen is used to evaluate the accuracy of the prediction of the SIF values. Finally, the efficiency of the present iterative solver is summarized by comparing the computational time for all cases.

• Journal of Astronomy and Space Sciences
• /
• v.38 no.2
• /
• pp.119-134
• /
• 2021

The data set collected during the night of the discovery of a minor body constitutes a too-short arc (TSA), resulting in failure of the differential correction procedure. This makes it necessary to recover the object during subsequent nights to gather more observations that will allow a preliminary orbit to be calculated. In this work, we present a recovery technique based on sampling the admissible region (AdRe) by the constrained Delaunay triangulation. We construct the AdRe in its topocentric and geocentric variants, using logarithmic and exponential metrics, for the following near-Earth-asteroids: (3122) Florence, (3200) Phaethon, 2003 GW, (1864) Daedalus, 2003 BH84 and 1977 QQ5; and the main-belt asteroids: (1738) Oosterhoff, (4690) Strasbourg, (555) Norma, 2006 SO375, 2003 GE55 and (32811) Apisaon. Using our sampling technique, we established the ephemeris region for these objects, using intervals of observation from 25 minutes up to 2 hours, with propagation times from 1 up to 47 days. All these objects were recoverable in a field of vision of 95' × 72', except for (3122) Florence and (3200) Phaethon, since they were observed during their closest approach to the Earth. In the case of 2006 SO375, we performed an additional test with only two observations separated by 2 minutes, achieving a recovery of up to 28 days after its discovery, which demonstrates the potential of our technique.

• The KIPS Transactions:PartB
• /
• v.15B no.4
• /
• pp.307-314
• /
• 2008

This paper presents a new robust watermarking method for curves that uses informed-detection. To embed watermarks, the presented algorithm parameterizes a curve using the B-spline model and acquires the control points of the B-spline model. For these control points, 2D mesh are created by applying Delaunay triangulation and then the mesh spectral analysis is performed to calculate the mesh spectral coefficients where watermark messages are embedded in a spread spectrum way. The watermarked coefficients are inversely transformed to the coordinates of the control points and the watermarked curve is reconstructed by calculating B-spline model with the control points. To detect the embedded watermark, we apply curve matching algorithm using inflection points of curve. After curve registration, we calculate the difference between the original and watermarked mesh spectral coefficients with the same process for embedding. By calculating correlation coefficients between the detected and candidate watermark, we decide which watermark was embedded. The experimental results prove the proposed scheme is more robust than previous watermarking schemes against print-scan process as well as geometrical distortions.

• Journal of KIISE:Software and Applications
• /
• v.28 no.7
• /
• pp.501-510
• /
• 2001

Generally, it is essential to estimate exact disparity for the 3D modeling from stereo images. Because existing methods calculate disparities from a whole image, they require too much cimputational time and bring about the mismatching problem. In this article, using the characteristic that the disparity vectors in stereo images are distributed not equally in a whole image but only exist about the background and obhect, we do a wavelet transformation on stereo images and estimate coarse disparity fields from the reduced lowpass field using area-based method at first-step. From these coarse disparity vectors, we generate disparity histogram and then separate object from background area using it. Afterwards, we restore only object area to the original image and estimate dense and accurate disparity by our two-step pixel-based method which does not use pixel brightness but use second gradient. We also extract feature points from the separated object area and estimate depth information by applying disparity vectors and camera parameters. Finally, we generate 3D model using both feature points and their z coordinates. By using our proposed, we can considerably reduce the computation time and estimate the precise disparity through the additional pixel-based method using LOG filter. Furthermore, our proposed foreground/background method can solve the mismatching problem of existing Delaunay triangulation and generate accurate 3D model.