• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2000년도 춘계학술발표대회
• /
• pp.505-508
• /
• 2000

In order to determine the position and the content of fatty acids attached to glycerides and the migration degree of fatty acids in the migration reaction, hydrolysis of fish oil was carried out with lipolase-100T derived from Aspergillus oryzae. The content of fatty acids in the glyceride mixture was analyzed and compared with that of fish oil. The amounts of fatty acid in 2-position and the migration degree of the fatty acid in 2,3-DG (diglyceride) and 2-MG (monoglyceride) were calculated. The results showed that approximately 95% (w/w) of DHA (docosahexaenoic acid) and 65% of EPA (eicosapentaenoic acid) was attached to the 2-position of glycerides in the fish oil. Approximately 87% (w/w) of DHA and 75% of EPA remained in 2,3-DG and 88% of DHA and 65% of EPA in 2-MG were not involved in the migration reaction.

• Journal of the Korean Wood Science and Technology
• /
• 제23권2호
• /
• pp.88-93
• /
• 1995

Acid-catalysts were used to accelerate the liquefaction of wood with phenol. Sulfuric acid was quite excellent as a acid-catalyst of liquefaction of wood. It's proper dose was 3% of oven-dried weight of wood to get the 10% of target degree of residue, when the reaction time was 2 hours. The liquefaction of wood catalyzed with sulfuric acid was easily carried out at low temperature of 140$^{\circ}C$, but the degrees of residue decreased gradually with the increase of reaction temperature. The behaviors of liquefaction of oak and radiata pine were nearly same.

• Journal of Microbiology and Biotechnology
• /
• 제10권4호
• /
• pp.502-506
• /
• 2000

In order to determine the position and the content of fatty acids sttached to glycerides and the migration degree of fatty acids in the migration reaction, fish oil was hydroyzed with lipolase-100T which was derived from Aspergillus oryzae. The content of fatty acids in the glyceride mixture was analyzed and compared with that of fish oil. The amounts of fatty acid in a 2-position and the migration degree of the fatty acid in 2,3-DG (diglyceride) and 2-MG (monolyceride) were carefully calculated. The results showed that approximately 95% (w/w) of DHA (docosahexanoic acid) and 65% of EPA(eicosapentaenoic acid) were attached to the 2-position of glycerides in fish oil. Approximately 87% (w/w) of DHA and 75% of EPA remained in 2,3-DG, and 88% of DHA and 65% of EPA in 2-MG were not involved in the migration reaction.

• Macromolecular Research
• /
• 제11권6호
• /
• pp.495-500
• /
• 2003

UV-induced graft polymerization of glycidyl methacrylate (GMA) to a polypropylene (PP) membrane was carried out in the vapor phase with benzophenone (BP) as a photoinitiator. Attenuated total reflection Fourier transform infrared spectroscopy, atomic force microscopy (AFM), and scanning electron microscopy (SEM) were utilized to characterize the copolymer. The degree of grafting increased with increasing reaction time, increased UV irradiation source intensity, and increased immersion concentration of the BP solution. The optimum synthetic condition for the PP-g-GMA membrane was obtained with a reaction time of 2 hrs, a UV irradiation source intensity of 450 W, and an immersion concentration of the BP solution of 0.5 mol/L. The pure water flux decreased upon increasing the degree of grafting and increasing the amount of diethylamino functional group introduced. The analysis of AFM and SEM images shows that the graft chains and diethylamino groups of PP-g-GMA grew on the PP membrane surface, resulting in a change in surface morphology.

• Corrosion Science and Technology
• /
• 제14권6호
• /
• pp.273-279
• /
• 2015

Effects of passive film quality by chemical passivation and solution flow on the corrosion behavior of 304 stainless steel in HCl solution were investigated using a coloration indicator, and by corrosion weight loss, electrochemical polarization and element dissolution measurements. A high redness degree suggests a low passive-film integrity for 304 stainless steel following air exposure, while the minimum redness degree for the samples after chemical passivation suggests a high passive-film integrity. In the static condition, samples subjected to air exposure exhibited a high corrosion rate and preferential dissolution of Fe. Chemical passivation inhibited the corrosion rate due to the intrinsically high structural integrity of the passive film and high concentrations of Cr-rich oxides and hydroxide. Solution flow accelerated corrosion by promoting both the anodic dissolution reaction and the cathodic reaction. Solution flow also altered the preferential dissolution to fast uniform dissolution of metal elements.

• Computers and Concrete
• /
• 제7권1호
• /
• pp.17-38
• /
• 2010

This research aimed to investigate the influence of high-volume mineral admixtures (MAs), i.e., fly ash and slag, on the hydration characteristics and microstructures of cement pastes. Degree of cement hydration was quantified by the loss-on-ignition technique and degree of pozzolanic reaction was determined by a selective dissolution method. The influence of MAs on the pore structure of paste was measured by mercury intrusion porosimetry. The results showed that the hydration properties of the blended pastes were a function of water to binder ratio, cement replacement level by MAs, and curing age. Pastes containing fly ash exhibited strongly reduced early strength, especially for mix with 45% fly ash. Moreover, at a similar cement replacement level, slag incorporated cement paste showed higher degrees of cement hydration and pozzolanic reaction than that of fly ash incorporated cement paste. Thus, the present study demonstrates that high substitution rates of slag for cement result in better effects on the short- and long-term hydration properties of cement pastes.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.327-328
• /
• 2006

We have demonstrated that textured $Al_2O_3-mullite-SiC$ nanocomposites can be fabricated by slip casting followed by partial oxidation - reaction sintering of mixed suspensions of $Al_2O_3$ and SiC powders in a high magnetic field. The sintered density was changed by the degree of oxidation at 1200C and 1300C. The degree of orientation of alumina in the nanocomposite was examined on the basis of the X-ray diffraction patterns and scanning electron micrographs. It is confirmed that alumina-oriented nanocomposites were fabricated. The three-point bending strength at room temperature was observed for the nanocomposites.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.455-456
• /
• 2006

We have demonstrated that textured $Al_2O_3-mullite-SiC$ nanocomposites can be fabricated by slip casting followed by partial oxidation. reaction sintering of mixed suspensions of $Al_2O_3$ and SiC powders in a high magnetic field. The sintered density was changed by the degree of oxidation at 1200C and 1300C. The degree of orientation of alumina in the nanocomposite was examined on the basis of the X-ray diffraction patterns and scanning electron micrographs. It is confirmed that aluminaoriented nanocomposites were fabricated. The three-point bending strength at room temperature was observed for the nanocomposites.

• 한국도로학회논문집
• /
• 제15권1호
• /
• pp.95-102
• /
• 2013

PURPOSES: The existing method evaluating the existence of the hollows in concrete pavement does not consider the stiffness of pavement. In addition, the method uses unreasonable logic judging the hollow existence by the deflection caused by zero loading. In this study, the deflection of slab corner due to heavy weight deflectometer (HWD) was measured in concrete pavement sections where underground structures are located causing the hollows around them. METHODS: The modulus of subgrade reaction obtained by comparing the actual deflection of slab to the result of finite element analysis was calibrated into the composite modulus of subgrade reaction. The radius of relative stiffness was calculated, and the relationship between the ratio of HWD load to the radius of relative stiffness and the slab deflection was expressed as the curve of secondary degree. RESULTS: The trends of the model coefficients showing width and maximum value of the curve of secondary degree were analyzed by categorizing the pavement sections into three groups : hollows exist, additional investigation is necessary, and hollows do not exist. CONCLUSIONS: The results analyzed by the method developed in this study was compared to the results analyzed by existing method. The model developed in this study will be verified by analyzing the data obtained in other sections with different pavement structure and materials.

• 한국식품영양과학회지
• /
• 제4권1호
• /
• pp.97-100
• /
• 1975

Degree of polished rice so called 70 percentage of polished rice sold at the 19 places of rice dealer's store in Gwang - Ju city were surveyed through the New M.G.color reaction reagent, from 24th to 30th of January, 1975. The results were as follows ; 1. Nearly the 70 percentage polished rice sold at the rice dealer's store showed some differences in the degree of polishing of rice, with respect to color reaction in comparison with standard 70 percentage polished rice. 2. There have been no rice which are over excessive 70 percentage polished rice. 3. The place were more than 90 percentage of 70percentage polished rice amount, were 3 places in the 19 places rice dealer's store and 50 percentage of below 70 percentage polished rice amount were 8 places in the 19 places.