• 콘크리트학회논문집
• /
• 제14권1호
• /
• pp.118-125
• /
• 2002

콘크리트는 수화과정을 통하여 재료가 성숙되고, 경화된다. 수화의 진행은 엄밀한 의미에서 재령에 의하지 않고 수화도에 의해 제어되므로, 경화가 진행되는 콘크리트의 모든 재료특성과 미세구조 형성과정은 수화도에 의해 정식화되는 것이 바람직하다. 기존 연구는 주로 양생온도가 수화발열속도에 미치는 영향을 고려한 반응함수 개념을 주로 사용하였고, 또한 내부 수분상태의 영향을 습도함수의 형태로 고려한 연구결과는 실제 수화기구를 반영하지 못하고 단지 각 연구자의 실험조건과 배합조건에만 부합하는 결과를 보인다. 따라서 본 연구는 기존 제안식의 단점을 보완하기 위하여 수화기구와 미세구조 형성 과정에 기초하여 반응속도함수를 모델링하였다. 수화반응속도는 온도 및 수분상태에 따라 변화하므로, 본 연구에서는 수화발열 속도에 영향을 미치는 인자로, 시멘트 종류, 물-시멘트비 등의 배합특성과 양생온도 빛 세공조직의 내부수분상태를 고려하였다. 똔 연구에서 제시한 콘크리트의 수화도 예측모델은 기존의 온도영향만을 주로 고려하는 반응속도함수를 콘크리트내부의 수분분포 상태를 고려하여 모델을 개선하였으며, 이는 실제 측정한 수화도에 매우 근접하여 그 유용성을 검증하였다. 또한 수화도의 정의와 제시한 모델을 이용하여 콘크리트 요소내의 온도, 습도 덴 수화도를 수치적으로 결정하여 단열온도상승곡선을 정확히 모사 할 수 있었다. 제안된 모델은 수화가 진행되는 콘크리트의 여러 역학적 특성 및 미세구조 형성과정을 적절히 표현하고, 수화과정이 온도 및 습도상태를 결정하는 초기재령 콘크리트의 단면 내 온 습도상태를 추정하여 궁극적으로 초기재령 콘크리트의 균열 위험성을 평가하는데 유용하게 이용될 수 있을 것으로 사료된다.

• 콘크리트학회논문집
• /
• 제26권6호
• /
• pp.723-730
• /
• 2014

최근 고로슬래그 미분말의 사용량이 증가함에 따라 고로슬래그 미분말 혼입 시멘트의 수화반응 모델뿐만 아니라 압축강도, 수화생성물, 수화열 등 고로슬래그 미분말 혼입 시멘트 페이스트의 물성에 관한 연구가 활발히 진행되고 있다. 하지만 고로슬래그 미분말 혼입 시멘트 페이스트의 물성에 큰 영향을 끼치는 고로슬래그 미분말의 반응도에 대한 연구는 세계적으로도 부족하며 특히 국내에서는 전무한 실정이다. 따라서 본 연구는 선택적 추출법을 이용하여 시멘트 페이스트 내 고로슬래그 미분말의 반응도를 정량분석하고 물 바인더비, 치환율, 양생온도에 따라 압축강도, 화학결합수, $Ca(OH)_2$을 측정하여 비교 분석 하였다. 실험결과 시멘트 페이스트 내 고로슬래그 미분말의 반응도, 화학결합수, $Ca(OH)_2$은 치환율이 낮고 물 바인더비와 양생 온도가 높을수록 높게 나타났으며 특히 고로슬래그 미분말의 반응도는 최종적으로 약 0.3~0.4 값에 수렴하는 것으로 나타났다.

• Bulletin of the Korean Chemical Society
• /
• 제18권9호
• /
• pp.1010-1013
• /
• 1997

Nucleophilic substitution reactions of (Z)-phenylethyl (X)-benzenesulfonates with (Y)-pyridines were investigated in acetonitrile at 60 ℃ under respective pressures. The magnitudes of the Hammett reaction constants, ρX, ρY and ρZ indicate that a stronger nucleophile leads to a greater degree of bond formation of C-N and a better leaving group is accompanied by a less degree of bond breaking. The magnitude of correlation interaction term, ρij can be used to determine the structure of the transition state (TS) for the SN reaction. As the pressure is increased, the Hammett reaction constants, ρX and |ρY|, are decreased, but correlation interaction coefficient, ρXZ and |ρYZ|, are increased. The results indicate that the reaction of (Z)-phenylethyl (X)-benzenesulfonates with (Y)-pyridines probably moves from a dissociative SN2 to early-type concerted SN2 mechanism by increasing pressure. This result shows that the correlation interaction term ρij can be useful tool to determine the structure of TS, and also the sign of the product ρXZ·ρYZ can be predict the movement of the TS.

• 약학회지
• /
• 제39권1호
• /
• pp.48-54
• /
• 1995

Coupling of tetracycline(Tc) to dithiocarbamate chitosan(DTCC) via chelate bond was investigated varying reaction time, concentration, temperature, pH, and Ca(II)/Tc ratio. The amount of Tc bound to matrix increased to give a maximum and decreased as the reaction proceeded. The degree and rate of dissociation of Tc complex were affected by the reaction temperature, and pH. By running the reaction at low temperature and pH, the degree of dissociation was greatly diminished. Properties of drug-release from DTCC-Ca(II)-Tc complex were studied by batch- and flow-method and release of Tc and CA(II) by flow method followed nearly zero-order. DTCC-Ca(II)-Tc showed very prolonged antimicrobial activity compared to that of free Tc.

• 한방안이비인후피부과학회지
• /
• 제28권1호
• /
• pp.134-142
• /
• 2015

Objective : This study was carried out to find out the effect of Korean medical treatments on tinea pedis with id reaction. Method : We treated a 33-year-old man was afflicted with tinea pedis complicating id reaction with herbal medicine, acupuncture, ointment, wet-dressing and steam treatment. After treatments, we measured the status of scales, fissures and the degree of pruritus. We followed up symptom changes by taking pictures and compared before and after. Result & Conclusion : Three days after admission, erythema occurred at upper and lower limbs and the degree of pruritus increased by id reaction. As tinea pedis improved, id reaction decreased, too. Consequently, both sites of primary lesions of tinea pedis and secondary id reactions were significantly improved, and accompanied symptoms were resolved simultaneously.

• Journal of Microbiology and Biotechnology
• /
• 제8권3호
• /
• pp.287-290
• /
• 1998

Acarbose effectively inhibited the synthesis of dextran, and the inhibition pattern was a noncompetitive type with a $K_i$ value of 1.35 mM. It also inhibited the disproportionation reaction of dextransucrase with isomaltotriose and decreased the efficiency of the maltose acceptor reaction. Increased concentration of dextransucrase or maltose in reaction digests, however, decreased the degree of inhibition by acarbose.

• 대한화학회지
• /
• 제17권6호
• /
• pp.450-454
• /
• 1973

고체상태에서 poly-${\varepsilon}$-caproamide의 후중합과 해중합을 질소흐름 및 밀봉의 두 조건하에서 행하였다. 중합도는 반응시간과 온도에 따라 증가하여 결국 평형에 도달하며, 산소의 존재하에서는 산화에 의해 해중합되어 중합도가 감소하게 된다. 중합도가 서로 다른 poly-${\varepsilon}$-caproamide를 반응시키면 평행에 도달했을 때의 중합도는 동일하게 된다.

• Design & Manufacturing
• /
• 제17권1호
• /
• pp.1-5
• /
• 2023

In multi-material injection molding, since two or more materials with different process conditions are used, it is essential to maximize process efficiency by operating the cooling or heating system to a minimum. In this study, Liquid silicone rubber (LSR) that can be cured at a low temperature suitable for the multi-material injection molding was selected and the cure behavior according to the process conditions was analyzed through differential scanning calorimetry (DSC). Dynamic measurement results of DSC with different heating rate were obtained, and through this, the total heat of reaction when the LSR was completely cured was calculated. Isothermal measurement results of DSC were derived for 60 minutes at each temperature from 80 ℃ to 110 ℃ at 10 ℃ intervals, and the final degree of cure at each temperature was calculated based on the total heat of reaction identified from the Dynamic DSC measurement results. As the result, it was found that when the temperature is lowered, the curing start time and the time required for the curing reaction increase, but at a temperature of 90 ℃ or higher, LSR can secure a degree of cure of 80% or more. However, at 80 ℃., it was found that not only had a relatively low degree of curing of about 60%, but also significantly increased the curing start time. In addition, in the case of 110 ℃, the parameters were derived from experimental result using the Kamal kinetic model.

• 한국정밀공학회지
• /
• 제24권10호
• /
• pp.131-136
• /
• 2007

In this paper, we estimated the effects of different color stimulation on the cognitive function of human quantitatively. For the stimulations we used color lights with 6 color filters such as red, yellow, green, blue, violet and white. The experiment was performed in a soundproof chamber. 50 young male and female subjects were participated in the experiment. To find the appropriate color cognitive function, the endogenous visuospatial attention task(EVAT) and one back working memory task(OWMT) were performed. The reaction time and accuracy degree were measured. The results showed that the reaction time of EVAT was the fastest and the accuracy degree of attention task was the highest in green environment. The reaction time of OWMT was the fastest in yellow and the accuracy degree of memory task was the highest in blue. For physiological parameters, we measured electrocardiogram(ECG) and HRV spectrum analysis, HF/LF color environment. These results can be used as an indicator in the design of color environment and clinical applications.

• 한국의류산업학회지
• /
• 제6권3호
• /
• pp.384-392
• /
• 2004

The purpose of this study is in development of effective filter-type polymer adsorbent for removal of pollutants from wastewater by UV irradiation graft polymerization. Photografting of acrylic acid (AA) on polypropylene (PP) nonwoven fabric using benzophenone (BP) as a photosensitizer was investigated. Inhibition of homopolymerization was achieved by adding various concentrations of $FeSO_4{\cdot}7H_2O$, $CuSO_4{\cdot}5H_2O$ and Mohr's salt. As AA concentration was increased, the degree of grafting was increased as to a specific value and then decreased, and the effect of BP concentration showed the same tendency. It was also found that the degree of grafting increased with reaction time and reaction temperature. Addition of the polyfunctional monomers and $H_2SO_4$ to the grafting system accelerated the photografting. The melting temperature, molecular weight and breaking stress and breaking strain were decreased with the increase in the degree of grafting.