• 제목/요약/키워드: Degradation Rate Coefficient

검색결과 80건 처리시간 0.031초

황산염 환원 조건에서 리그노셀룰로오스의 분해 및 리그닌과 셀룰로오스의 상호작용 (Lignocellulose Biodegradation and Interaction between Cellulose and Lignin under Sulfate Reducing Conditions)

  • 고재중;김석구;시미즈 요시히사
    • 유기물자원화
    • /
    • 제15권4호
    • /
    • pp.131-137
    • /
    • 2007
  • 황산염 환원조건에서의 리그노셀룰로오스의 분해에 대하여 고찰하였다. 특히, 리그닌에 대한 셀룰로오스의 비(C/L 비)를 각각 42.15, 4.59, 2.51, 1.14, 0.7로 하여 리그닌과 셀룰로오스의 상호작용에 대하여 고찰하였다. 셀룰로오스의 분해율은 1차 반응식에 의해 계산되어져, C/L 비가 감소할수록 반응상수는 감소하여 셀룰로오스의 분해에 대한 리그닌의 저해작용을 보여 주였다. 1차 반응식에 의한 반응상수와 리그닌의 함량의 증가에 대한 셀룰로오스의 분해율은 0.97의 $R^2$ 값을 가지며 로그힘수에 의해 표현할 수 있었다. 리그노셀룰로오스의 분해율 또한 C/L 비와 로그함수의 관계를 가지며 리그닌의 함량이 많을수록 감소하였다. 리그닌의 분해율은 C/L 비가 2.51 및 1.14인 조건에서 4.59 및 0.7의 조건보다 높게 나타나, 공동기질로서의 과도한 탄소원은 리그닌분해에 장애가 됨을 보여 주였다.

  • PDF

모래 캡핑 두께가 퇴적물 인 용출에 미치는 영향 (Impact of Thickness of Sand Capping on Phosphorus Release Rate from Sediment)

  • 정우혁;김건하
    • 생태와환경
    • /
    • 제39권3호통권117호
    • /
    • pp.331-339
    • /
    • 2006
  • 본 연구는 퇴적물의 인 용출을 제어하기 위한 방법으로 모래를 이용한 캡핑을 포설할 경우 두께에 따른 인 용출율 저감 효과를 파악하기 위하여 수행되었다. 캡핑은 퇴적물의 인이 수체로 용출되는 속도를 저감시키며, 미생물의 기질소모 이하로 그 속도를 낮추면 수체내의 인의 농도를 일정하게 유지할 수 있음을 알 수 있었다. 모래캡핑의 두께와 용출저감은 선형의 상관관계를 보이며 캡핑 두께가 40 mm에서 80 mm로 두꺼울수록 탈산소계수가 0.311 $day^{-1}$에서 0.262 $day^{-1}$으로 작아지고 있으며, 두께가 증가함에 따라 재폭기 계수는 0.013 $day^{-1}$에서 0.0240 $day^{-1}$으로 커지는 것으로 나타났다. 회귀분석한 결과에 의하면 최소한 20${\sim}$40 mm의 모래캡핑을 실시하더라도 인 용출량을 효율적으로 저감 시킬 수 있는 것으로 나타났다.

PEMFC의 고분자막에서 지지체가 고분자전해질 막 성능 및 전기화학적 내구성에 미치는 영향 (Effect of Support on the Performance and Electrochemical Durability of Membrane in PEMFC)

  • 오소형;임대현;이대웅;박권필
    • Korean Chemical Engineering Research
    • /
    • 제58권4호
    • /
    • pp.524-529
    • /
    • 2020
  • 고분자전해질 연료전지의 기계적 내구성을 높이기 위해 고분자막에 지지체를 넣은 강화막이 사용되고 있다. 지지체는 주로 e-PTFE를 사용하는데 소수성이고 이온전달이 안되므로 성능저하의 원인이 될 수 있다. 그래서 본 연구에서는 e-PTFE 지지체가 PEMFC 성능과 전기화학적 내구성 미치는 영향에 대해 연구하였다. 본연구에서는 지지체가 들어간 강화막과 들어가지 않은 단일막(비강화막)을 비교하였는데, 지지체의 소수성 때문에 강화막의 물 확산계수가 단일막보다 낮았다. 강화막은 물확산 계수가 낮아 이온의 막 이동 저항이 단일막보다 높았다. 지지체의 낮은 수소투과도 때문에 강화막의 OCV가 단일막보다 높았다. 지지체가 수소투과도를 감소시킴으로서 라디칼 발생속도를 감소시켜 강화막의 전기화학적 내구성도 향상시킴을 보였다.

충격 프레팅에 의한 증기발생기 세관 마모손상 진행모델 (Wear Progress Model by Impact Fretting in Steam Generator Tube)

  • 이정근;박치용;김태룡;조선영
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2007년도 춘계학술대회A
    • /
    • pp.1684-1689
    • /
    • 2007
  • Fretting wear is one of the important degradation mechanisms of steam generator tubes in the nuclear power plants. Especially, impact fretting wear occurred between steam generator tubes and tube support plates or anti-vibration bar. Various tests have been carried out to investigate the wear mechanisms and to report the wear coefficients. Those are fruitful to get insight for the wear damage of steam generator tubes; however, most wear researches have concentrated on sliding wear of the steam generator tubes, which may not represent the wear loading modes in real plants. In the present work, impact fretting tests of steam generator tube were carried out. A wear progression model for impact-fretting wear has been investigated and proposed. The proposed wear progression model of impact-fretting wear is as follows; oxide film breaking step at the initial stage, and layer formation step, energy accumulation step and finally particle torn out step which is followed by layer formation in the stable impact-fretting progress. The wear coefficient according to the work-rate model has been also compared with one between tube and support.

  • PDF

충격 프레팅에 의한 증기발생기 세관 마모손상 진행모델 (Wear Progress Model by Impact Fretting in Steam Generator Tube)

  • 박치용;이정근;김태룡
    • 대한기계학회논문집A
    • /
    • 제32권10호
    • /
    • pp.817-822
    • /
    • 2008
  • Fretting wear is one of the important degradation mechanisms of steam generator tubes in the nuclear power plants. Especially, impact fretting wear occurred between steam generator tubes and tube support plates or anti-vibration bar. Various tests have been carried out to investigate the wear mechanisms and to report the wear coefficients. Those are fruitful to get insight for the wear damage of steam generator tubes; however, most wear researches have concentrated on sliding wear of the steam generator tubes, which may not represent the wear loading modes in real plants. In the present work, impact fretting tests of steam generator tube were carried out. A wear progress model for impact-fretting wear has been investigated and proposed. The proposed wear progress model of impact-fretting wear is as follows; oxide film breaking step at the initial stage, and layer formation step, energy accumulation step and finally particle torn out step which is followed by layer formation in the stable impact-fretting progress. The wear coefficient according to the work-rate model has been also compared with one between tube and support.

네트워크 환경에서 서버용 음성 인식을 위한 MFCC 기반 음성 부호화기 설계 (A MFCC-based CELP Speech Coder for Server-based Speech Recognition in Network Environments)

  • 이길호;윤재삼;오유리;김홍국
    • 대한음성학회지:말소리
    • /
    • 제54호
    • /
    • pp.27-43
    • /
    • 2005
  • Existing standard speech coders can provide speech communication of high quality while they degrade the performance of speech recognition systems that use the reconstructed speech by the coders. The main cause of the degradation is that the spectral envelope parameters in speech coding are optimized to speech quality rather than to the performance of speech recognition. For example, mel-frequency cepstral coefficient (MFCC) is generally known to provide better speech recognition performance than linear prediction coefficient (LPC) that is a typical parameter set in speech coding. In this paper, we propose a speech coder using MFCC instead of LPC to improve the performance of a server-based speech recognition system in network environments. However, the main drawback of using MFCC is to develop the efficient MFCC quantization with a low-bit rate. First, we explore the interframe correlation of MFCCs, which results in the predictive quantization of MFCC. Second, a safety-net scheme is proposed to make the MFCC-based speech coder robust to channel error. As a result, we propose a 8.7 kbps MFCC-based CELP coder. It is shown from a PESQ test that the proposed speech coder has a comparable speech quality to 8 kbps G.729 while it is shown that the performance of speech recognition using the proposed speech coder is better than that using G.729.

  • PDF

Predicting In Sacco Rumen Degradation Kinetics of Raw and Dry Roasted Faba Beans (Vicia faba) and Lupin Seeds (Lupinus albus) by Laboratory Techniques

  • Yu, P.;Egan, A.R.;Leury, B.J.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제13권10호
    • /
    • pp.1377-1387
    • /
    • 2000
  • Two laboratory techniques: (1) an in vitro method with two procedures for measuring protein degradabilities and (2) an in vitro method with three procedures for measuring protein solubility, were investigated to determine which laboratory techniques could most accurately predict the quantity of rumen protein degradation kinetics of legume seeds after dry roasting under various conditions, in terms of (1) rumen protein disappearance ($D_j$, where j=0, 2, 4, 8, 12, 24 and 48 h incubation), (2) rumen protein effective degradability (EDCP), (3) the parameters describing rumen degradation characteristics (the soluble fraction: S, the potentially degradable fraction: D, undegradable fraction: U, lag time: T0 and the degradation rate: Kd) and (4) rumen bypass protein (BCP), which were determined by the method accepted internationally at present, in sacco nylon bag technique using the standardized Dutch method. Feeds evaluated were the raw and dry roasted whole faba (Vicia faba) beans (WFB) and whole lupin (Lupinus albus) seeds (WLS), each was dry roasted under various conditions (at 110, 130 or $150^{\circ}C$ for 15, 30 or 45 min). In vitro protein degradability ($D_1$_Auf and $D_{24}$_Auf) were determined using the modified Aufr re method by enzymatic hydrolysis for 1 h and 24 h using a protease extracted from Streptomyces griseus in a borate-phosphate buffer. In vitro protein solubility ($bf_1$_S, $bf_2$_S, $bf_3$_S) was measured in a borate-phosphate buffer with three different procedures. Results from laboratory techniques (in vitro) were correlated and linearly regressed with in sacco results. Of the three procedures of in vitro protein solubility evaluated, none of them could predict in sacco results with good precision. The highest Pearson correlation coefficient ($R^2$) was less than 0.50. Of two procedures of in vitro protein degradability studied, the $D_1$_Auf values were closely correlated with in sacco parameters: Kd, EDCP and %BCP with high R' values: 0.82, 0.85 and 0.85, respectively, and closely correlated with in sacco $D_j$ at 2, 4, 8 and 12 h rumen incubation with high $R^2$ values: 0.83, 0.91, 0.93 and 0.83, respectively. The $D_{24}$_Auf values could not predict in sacco results. The highest $R^2$ value was less then 0.40. These results indicated that in vitro protein solubility measured in borate-phosphate failed to identify differences in the rate and extent of protein degradation of legume seeds after dry roasting under various conditions and thus should not be used to predict rumen degradation, particularly for heat processed feedstuffs. But in vitro protein degradability using the modified Aufr re method by enzymatic hydrolysis for 1 h or possibly an intermediate time (>1 h and <24 h) is a promising laboratory procedure to detect effectiveness of dry roasting legume seeds on rumen protein degradation characteristics and could be used as a simple laboratory method to predict the rate and extent of protein degradation in the rumen in sacco with high accuracy. The equations to predict EDCP, Kd and BCP of dry roasted legume seeds (WLS and WFB) under various conditions are as follow: For both: EDCP (%)=-1.37+1.06*$D_1$_Auf ($R^2=0.85$, p<0.01). For both: Kd (%/h)=-21.81+0.49*$D_1$_Auf ($R^2=0.82$, p<0.01). For both: %BCP=103.37-1.07*$D_1$_Auf ($R^2=0.85$, p<0.01).

Hydrazine/Methanol 처리에 의한 PET film의 표면특성과 염색성 (Surface Characterization and Dyeing Property of PET Film Treated with Hydrazine Hydrate in Methanol)

  • 성우경;조현혹;김경환
    • 한국염색가공학회지
    • /
    • 제1권1호
    • /
    • pp.26-34
    • /
    • 1989
  • The selective chemical degradation or etching of PET based on an organic amine attack on the ester group. The techniques involves the chemical removal of loss ordered amorphous regions or crystalline regions, which are essentially unaffected by the degradative etchant. Thus, most of previous studies have limited to consideration which has been given to structural changes taking place. Therefore, this study was carried out to investigate surface characterization, dyeing properties of PET film hydrazinolyzed with hydrazine hydrate in methanol. PET film was treated with 30% hydrazine hydrate in methanol at $30^\circ{C}$ for various time intervals. The total surface tension of treated PET increased, the dispersion force decreased and the hydrogen bonding force increased. The equilibrium dye adsorption, dyeing rate and apparent diffusion coefficient of acid dyes increased, and the apparent activation energies of diffusion decreased.

  • PDF

ASE와 SPMDs를 이용한 퇴적물중 PCDD/Fs의 전처리법 개발 (Pretreatment Method Development of PCDD/Fs in Sediment Using ASE and SPMDs)

  • 천만영
    • Environmental Analysis Health and Toxicology
    • /
    • 제22권1호
    • /
    • pp.49-55
    • /
    • 2007
  • Three kind of ASE (Accelerated Solvent Extraction) and SPMDs (Semi-Permeable Membrane Devices) combined methods (ASE-SPMDs, ASE-accelerated SPMDs and SPMDs without extraction) and general Soxhlet-GPC were compared each other for the analysis of PCDD/FS in sediment. The average recovery rate of three types ASE and SPMDs combined methods (108.1%) were higher than that of the Soxhlet-GPC (79.5%) for three samples in each method using surrogate internal standards. The average coefficient of variation (10%, $2.1{\sim}25.2%$) for each congener of PCDD/Fs shows the reasonable results. Total PCDD/Fs concentrations after SPMDs without extraction were quite low, but those after ASE-SPMDs and ASE-accelerated SPMDs methods were close to the Soxhlet-GPC. Thus, the ASE-SPMDs and ASE-accelerated SPMDs methods are considered as the excellent pre-treatments method because they need less solvent and time without quality degradation.

유류오염 토양 내 석유계 탄화수소 화합물의 분해에 대한 퇴비의 시용 효과 (The Effect of Compost Application on Degradation of Total Petroleum Hydrocarbon in Petroleum-Contaminated Soil)

  • 김성은;김용균;이상몽;박현철;김근기;손홍주;노용동;홍창오
    • 한국환경농학회지
    • /
    • 제34권4호
    • /
    • pp.268-273
    • /
    • 2015
  • 본 연구는 유류로 오염된 토양의 정화를 위한 생물자극법에서 퇴비의 시용효과를 알아보기 위해 실시되었다. TPH로 오염된 토양에 퇴비를 수준별로 처리 한 후 TPH 함량 변화를 관찰 한 결과, 퇴비 처리량이 증가 할수록 토양 내 TPH 함량이 감소하는 경향이 나타났다. TPH 분해율을 알아보고자 퇴비 처리수준에 따른 TPH 함량 변화를 1차와 2차 kinetics 모델에 적용하여 결정계수(R2)를 비교 한 결과 second order kinetic 모델의 결정계수 값이 잘 적용되었다. 퇴비를 처리하였을 때 seond-order kinetic 모델의 reaction rate constant 값은 퇴비를 30 Mg/ha 이상 처리하였을 때 무처리 보다 4배 정도 높게 나타났으며, 퇴비 처리 수준이 높아질수록 그 값은 증가하는 경향을 보였다. 퇴비의 처리량을 증가시킴에 따라 토양 내 미생물의 수는 증가하는 경향을 나타냈다. 또한 퇴비의 처리량은 토양 내 미생물 수와 TPH 함량의 변화와 밀접한 관계가 있음을 보여주었다. 따라서 TPH로 오염된 토양 내 적합한 양의 퇴비 처리는 토양 내 미생물 수를 증가시켜 TPH 함량의 감소를 가속화시킬 수 있을 것으로 판단된다.