• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.12
• /
• pp.150-156
• /
• 2017

This study examined the stress recovery length due to the local damage of a 7-wire strand, which is applied widely to PSC (Post Tensioned Concrete) bridges and cable-stayed bridges. The 7-wire strand is a multiple stranded steel of PC prestressing strand. Owing to the nature of the material, it is damaged continuously after completion with corrosion being the main cause of damage. On the other hand, due to its structural characteristics, it is difficult to grasp the degree of damage inside the cable and the pattern of stress variation. In the case of cables applied to bridges, the parts that are susceptible to corrosion are generated depending on the water supply and installation shape, which may cause local damage. This study analyzed the tendency of performance degradation and stress recovery length according to local damage of a 7-wire strand, which is applied mainly to bridge post-tensioning or stay cables. This study developed a computer-based simulation model that was validated with experimental results. The model developed in this study can be used to evaluate the safety level and estimate the remaining life span of P SC bridges or cable-stayed bridges.

• Applied Chemistry for Engineering
• /
• v.10 no.3
• /
• pp.349-353
• /
• 1999

A study was carried out to see the effects of phenol on the biological degradation of a wastewater containing 2,4-dichlorophenol and 2,4-dinitrophenol and the biodegradation kinetic coefficients of Eckenfelder's modified model for the activated sludge process. The system containing base mix (BM) which was formulated with essential energy sources and nutrients was run down and washed out when 2,4-dichlorophenol and 2,4-dinitrophenol was introduced into the base mix unit without acclimation to phenol. Whereas for the system acclimated to phenol, the treatment efficiency was 91.9% in terms of $BOD_5$ and treatability for each chemical of phenol, 2,4-dichlorophenol, and 2,4-dinitrophenol was 99.8%, 43.3% and 62.5% based on concentration, respectively. Additional BM was added into the combined unit containing phenol, 2,4-dichlorophenol, 2,4-dinitrophenol so that the better treatment efficiency was achieved for each compound. The biokinetic coefficient of Eckenfelder's modified model without phenol acclimation was not estimated because the system did not reach the steady state. Thc coefficient for the phenol acclimation was 12.44 /day, however it was changed as 46.91 /day in addition of both of phenol acclimation and 47 mg/l of BM. The results presented above could be useful for the process design and further study in the field of biodegradation of benzene derivatives.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.1
• /
• pp.200-214
• /
• 1993

This paper presents the results of fluidelastic instability analysis performed for the U-tube bundle of a Westinghouse model 51 steam generator, one of the recirculating types designed at an early stage, in which the principal region of external cross-flow is associated with the U-bend portion of tube. The prerequisites for this analysis are detailed informations of the secondary side flow conditions in the steam generator and the free vibration behaviours of the U-tubes. In this study, the three-dimensional two-phase flow field in the steam generator has been calculated employing the ATHOS3 steam generator two-phase flow code and the ANSYS engineering analysis code has been used to calculate the free vibration responses of specific U tubes under consideration. The assessment of the potential instability for the suspect U-tubes, which is the final analysis process of the present work, has been accomplished by combining the secondary side velocity and density distributions obtained from the ATHOS3 prediction with the relative modal displacement and natural frequency data calculated using the ANSYS code. The damping of tubes in two-phase flow has been deduced from the existing experimental data by taking into account the secondary side void fraction effect. In operation of the steam generator, the tube support conditions at the tube-to-tube support plate intersections due to either tube denting degradation or deposition of tube support plate corrosion products or ingression of dregs. Thus, various hypothetical cases regarding the tube support conditions at the tube-to-tube support plate intersections have been considered to investigate the clamped support effects on the forced vibration response of the tube. Also, the effect of anti-vibration bars support in the curved portion of tube has been examined.

• Journal of Applied Biological Chemistry
• /
• v.62 no.4
• /
• pp.407-415
• /
• 2019

The biological half-life of pesticides applied on crops is the key indicator for ensuring the safety of agricultural products. The biological half-life is affected by the several factors like growing conditions of the crop, climate, application method, and physicochemical properties of pesticides. In this study, the biological half-life was calculated and the degradation rates of six triazole fungicides sprayed on perilla leaves were evaluated. Moreover, the statistical analysis confirmed the correlation between the biological half-life and physicochemical properties of six triazole pesticides. The recoveries of the six pesticides were between 84.8-104.9%, which satisfied the residual pesticide analysis criteria. The biological half-life of six pesticides sprayed on perilla leaves, calculated using the first-order kinetics model, ranged between 6.4-15.1 days. When the biological half-life and the physicochemical properties were correlated using the principal component analysis: pKa and Log P, the biological half-life was found to be affected by PC1. The correlation coefficient between biological half-life and physicochemical properties (pKa), calculated by Spearman rank-order correlation, was R² = -0.928 (p <0.01). Biological half-life has been shown to correlate with pKa. In conclusion, it can be used as a database for the relationship between biological half-life and physicochemical properties and will contribute to ensure safe supply of agricultural products.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.4
• /
• pp.2784-2790
• /
• 2015

The column-oriented database storage is a very advanced model for large-volume data transactions because of its superior I/O performance. Traditional data storages exploit row-oriented storage where the attributes of a record are placed contiguously in hard disk for fast write operations. However, for search-mostly data warehouse systems, column-oriented storage has become a more proper model because of its superior read performance. Recently, solid state drive using flash memory is largely recognized as the preferred storage media for high-speed data analysis systems. In this research, we propose a new transaction recovery scheme for a column-oriented database environment which is based on a flash media file system. We improved traditional shadow paging schemes by reusing old data pages which are supposed to be invalidated in the course of writing a new data page in the flash file system environment. In order to reuse these data pages, we exploit reused shadow list structure in our column-oriented shadow recovery(CoSR) scheme. CoSR scheme minimizes the additional storage overhead for keeping shadow pages and minimizes the I/O performance degradation caused by column data compression of traditional recovery schemes. Based on the results of the performance evaluation, we conclude that CoSR outperforms the traditional schemes by 17%.

• Korean Journal of Food Science and Technology
• /
• v.28 no.6
• /
• pp.1126-1134
• /
• 1996

The physical characteristics changes of carrots during drying were studied to minimize the quality degradation by applying improved drying process and pretreatment method. Physico-chemical properties of the product were analyzed, and then, drying mechanisms were explained by diffusion coefficients and drying models. In hot air drying process, the drying and rehydration efficiencies were high at low relative humidity and high temperature. Browning degree and specific volume also showed similar trend to drying efficiency. Diffusion coefficient, which describes moisture transfer, was also high at low relative humidity and at high temperature. It was verified using. Arrhenius equation that drying process was influenced by temperature. It was also observed during experiment that temperature changes were more effective in drying than relative humidity changes. Quadratic model was the most fittable in explaining the process. As a result of analyzing the experimental data with respect to the drying time, the contents of carotene and moisture could be modeled as a polynomial. As the air velocity increased, drying performance and rehydration efficiency increased.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.39 no.1
• /
• pp.20-33
• /
• 2002

Usage of ATM AAL2 packets becomes dominant to increase transmission efficiency of voice traffic in the backbone network. In case of voice service that uses AAL2 mechanism, if resources of network are enough, connection of new call is accepted. However, due to packets generated by the new call, transmission delay of packets from old calls can increase sharply. To control this behavior, in this paper we present an AAL2 buffer management scheme that allocates a virtual buffer to each call and after calculating its propagation delay variation(PDV), decides to drop packets coming from each call according to the PDV value. We show that this packet dropping algorithm can effectively prevent abrupt QoS degradation of old calls. To do this, we analyze AAL2 packet composition process to find a critical factor in the process that influences the end-to-end delay behavior and model the process by K-policy M/D/1 queueing system and MIN(K, Tc)-policy M/D/1 queueing system. From the mathematical model, we derive the probability generating function of AAL2 packets in the buffer and mean waiting time of packets in the AAL2 buffer. Analytical results show that the AAL2 packet dropping algorithm can provide stable AAL2 packetization delay and ATM cell generation time even if the number of voice sources increases dramatically. Finally we compare the analytical result to simulation data obtained by using the COMNET Ⅲ package.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.16 no.3
• /
• pp.85-90
• /
• 1987

This experiment was carried out to study the preparations of red pepper oleoresin, the effects of pH and heat treatment on the stabilities of capsanthin and capsaicin in oleoresin state, and the interacting effects of ascorbic acid, metal salts and EDTA on the stabilities of capsanthin in the oleoresin-linoleate aqueous model system. The results were as follows: 1. Acetone was the most effective solvent to extract capsanthin and capsaicin from red pepper powder. The yield of oleoresin extracted with acetone was 14.27%. 2. Capsaicin was more stable at high temperature than capsanthin in oleoresin state. Capsanthin and capsaicin in oleoresin state were comparatively stable in the range (ron) pH 3 to pH 8. 3. Ascorbic acid acted as a prooxidant on the capsanthin oxidation reaction at concentrations up to $10^{-3}M$, but acted as an antioxidant at $10^{-1}M$. 4. The addition of $Cu^{+2}M$ and $Fe^{+3}M$ ions at all concentration increased the prooxidant activity on the degradation of capsanthin in oleoresin state. 5. EDTA showed a strong antioxidation the stability of capsanthin in oleoresin state.

• The KIPS Transactions:PartD
• /
• v.15D no.4
• /
• pp.451-462
• /
• 2008

Recently, with the advent of applications using locations of moving objects, it becomes crucial to develop efficient index schemes for spatio-temporal databases. The $TPR^*$-tree is most popularly accepted as an index structure for processing future-time queries. In the $TPR^*$-tree, the future locations of moving objects are predicted based on the CBR(Conservative Bounding Rectangle). Since the areas predicted from CBRs tend to grow rapidly over time, CBRs thus enlarged lead to serious performance degradation in query processing. Against the problem, we propose a new method to adjust CBRs to be tight, thereby improving the performance of query processing. Our method examines whether the adjustment of a CBR is necessary when accessing a leaf node for processing a user query. Thus, it does not incur extra disk I/Os in this examination. Also, in order to make a correct decision, we devise a cost model that considers both the I/O overhead for the CBR adjustment and the performance gain in the future-time owing to the CBR adjustment. With the cost model, we can prevent unusual expansions of BRs even when updates on nodes are infrequent and also avoid unnecessary execution of the CBR adjustment. For performance evaluation, we conducted a variety of experiments. The results show that our method improves the performance of the original $TPR^*$-tree significantly.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.11
• /
• pp.11-18
• /
• 2014

Most of the energy efficient MAC protocols for wireless sensor networks (WSNs) are based on duty cycling in a single channel and show competitive performances in a small number of traffic flows; however, under concurrent multiple flows, they result in significant performance degradation due to contention and collision. We propose a multi-channel pipelining (MCP) method for convergecast WSN in order to address these problems. In MCP, a staggered dynamic phase shift (SDPS) algorithms devised to minimize end-to-end latency by dynamically staggering wake-up schedule of nodes on a multi-hop path. Also, a phase-locking identification (PLI) algorithm is proposed to optimize energy efficiency. Based on these algorithms, multiple flows can be dynamically pipelined in one of multiple channels and successively handled by sink switched to each channel. We present an analytical model to compute the duty cycle and the latency of MCP and validate the model by simulation. Simulation evaluation shows that our proposal is superior to existing protocols: X-MAC and DPS-MAC in terms of duty cycle, end-to-end latency, delivery ratio, and aggregate throughput.