• 대한수학회지
• /
• 제36권2호
• /
• pp.243-256
• /
• 1999

We will consider f,g : S1longrightarrowS2 a pair of maps between two orientable compact surfaces. The purpose of this paper is to decide when the pair can be deformed to a pair (f', g') such that

• 산업기술연구
• /
• 제17권
• /
• pp.21-29
• /
• 1997

In this paper, an adaptive image binarization scheme is proposed for automated surface strain measurement. At first, we reviewed an image based 3D deformation factor measurement briefly. Then, a new adaptive thresholding method is proposed for the extraction of lattice pattern from a deformed plate image using its local mean and variance. Some experimental results are presented to verify the effectiveness of our approaches.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 추계학술대회논문집
• /
• pp.93-96
• /
• 2003

Recently, various bulk metallic glasses (BMG's) haying good mechanical and chemical properties were developed. BMG's can easily be deformed in the supercooled liquid region, via viscous flow mechanism. In our previous work, we evaluated the deformation behavior and some other basic properties of Z $r_{41.2}$ $Ti_{13.8}$C $u_{12.5}$N $i_{10}$B $e_{22.5}$ alloy. In this study, we investigated the micro forming of Z $r_{41.2}$ $Ti_{13.8}$C $u_{12.5}$N $i_{10}$B $e_{22.5}$ alloy. The process condition was chosen based on the viscosity data from TMA, and superalloy and Si wafer with micro patterns on the surface were used as forming die. The alloy showed good replication of the patterns. However, some stripe patterns, resembling scratches, appeared on the deformed alloy surface. These scratches can be reduced or eliminated by polishing before forming.ing.ore forming.ing.

• 한국산학기술학회논문지
• /
• 제8권4호
• /
• pp.815-820
• /
• 2007

본 논문에서는 휴대용 무선통신기기에 장착해서 사용 가능한 소형 내장형 이중대역(RFID, PCS) 안테나가 소개되었다. 제안된 안테나는 기본적인 PIFA(Planar Inverted-F Antenna) 구조이며 기존 안테나 방사체 아래쪽에 변형된 접지구조를 추가하였다. 이 변형된 접지 구조는 안테나에 의해 유기되는 전류를 분산시키고 안테나 주 방사부와 결합성분을 유도하여 안테나를 소형화시킨다. 시뮬레이션 결과에 따라 안테나가 실제 제작되고 측정되었으며 변형된 접지로 인해 공진 주파수가 낮은 주파수 대역으로 150MHz 정도 이동하는 것을 볼 수 있었다. 그리고 제안된 안테나의 표면전류가 분산되는 특징이 관찰되어 전자파흡수율(SAR)과 보청기호환성(HAC)을 개선하는데 사용될 수 있다.

• Tribology and Lubricants
• /
• 제28권1호
• /
• pp.1-6
• /
• 2012

In this paper, a three elastic body sliding contact problem is modeled to investigate more precise wear mechanisms related with the sealing surface. A 3-D finite element contact model, a small spherical elastic particle, PTFE seal and steel surface, is solved using a nonlinear finite element code MARC. The deformed seal and steel surface shapes, von-Mises and principal stress distributions are obtained for different seal sliding distances. The entrapped small particle within PTFE seal results in very high stresses on the steel surface which exceeded its yield strength and produce plastic deformation such as groove and torus. The sealing surface could also be worn down by sub-surface fatigue due to intervening small particles together with the well-known abrasive wear. Therefore the proposed contact model adopted in this paper can be applied in design of various sealing systems, and further studies are required.

• 대한기계학회논문집A
• /
• 제28권11호
• /
• pp.1692-1696
• /
• 2004

This paper presents the thermally induced hot spot characteristics of rubbing surface in the friction pad disk brake. During the braking period, the rubbing surface with irregular asperities that are strongly engaged in rough surface, wear, and deformed surface due to a friction heating may produce an irregular distorted geometry of the disk surface. The tribological interactions between the disk and the pads are unstable if the contact stress is severe, in which the irregularity develops the contact pressure distribution, leading eventually to localized contact, high temperature and formation of hot spots. The computed results of contact spots that are simulated using a coupled thermal-mechanical analysis present sinusoidal distortions and localized extrusions of the disk surface, which are strongly related to a hot spot in the practical disk brake.

• 한국정밀공학회지
• /
• 제10권3호
• /
• pp.47-56
• /
• 1993

Typical plastic strains in the machined surface are very difficult to measure, since they are located within a very short distance from the surface and they change very rapidly. There is an alternative way to determine the residual strain in plastically deformed materials by measuring the grain size after a subsequent recrystallization precess. Although, this technique has been successfully applied by several researchers to find the plastic zone around notches and cracks in various materials and welding beads, few works have been reported using the recrystallization method to determine the residual strains in machined surface. Therefore, the purpose of this investigation is to explore the effectiveness of the recrystallization technique in machining applications and in particular, to find the effect of cutting parameters, i.e., depth of cut, rake angle, on the plastic strains. As the result, the recrystallization technique was succesfully applid to determine the plastic strain in machined surface.

• 소성∙가공
• /
• 제22권2호
• /
• pp.93-100
• /
• 2013

A tryout is a series of process optimization for robust stamping before transfer to the press shop. During tryout, the drawbead control, blank shape determination, binder surface modification, etc., are carried out mainly by a trial-and-error approach. As the level of difficulty of the stamping process increases, the formability becomes more sensitive to the contour of deformed shape, i.e. the blank shape. A digital tryout technique, which simulates a real tryout process, is proposed in this study for challenging stamping processes. Since digital tryout is carried out on a desktop, not in a press shop, a precise control of the deformed contour can be achieved if an optimal blank design technique is utilized. In this work, the proposed digital tryout technique is validated by successful applications to different automotive parts.

• 대한기계학회논문집A
• /
• 제28권7호
• /
• pp.992-998
• /
• 2004

During the tube hydropiercing, the region adjacent to the pierced hole will be deformed and will be drawn away from the die block as the punch advances through the wall of the tube. The deformation in the region may range from a substantially flat form to a countersunk form, so called rollover. In this study, the effects of material properties, shape of piercing punches, roundness of tube surface and internal pressure within the tube during piercing on the rollover have been investigated experimentally. The results provide the quantitative variation of rollover at given hydropiercing parameters, and a relationship between the deformed radius and the rollover caused by the deformation has been established.

• Advances in materials Research
• /
• 제1권4호
• /
• pp.349-359
• /
• 2012

To reveal localized plastic deformation zones in a tough pitch copper, the etching characteristics of a copper sample have been examined. The etching was carried out on a sample surface using an etchant consisting of 25 ml nitric acid solution and 75 ml water. To clarify the plastic deformation zone, the sample deformed plastically was heated to between $250^{\circ}C$ and $300^{\circ}C$ before the etching process. This is due to a change of the microstructure and crystal orientation in the plastic deformation zone producing recrystallized small grains. In this case, the plastically deformed zone is severely etched, whereas the undeformed zone is only slightly etched. Identification of the details of the deformation zone from the etching is further discussed.