• 콘크리트학회논문집
• /
• 제20권3호
• /
• pp.345-356
• /
• 2008

선행 연구에서는 할선강성에 대한 선형해석을 수행함으로써 편리하게 비탄성 설계를 할 수 있는 직접 비탄성 스트럿-타이 모델이 개발되었다. 본 연구에서는 기존 직접 비탄성 스트럿-타이 모델을 개선하여, 반복계산 없이 할선강성에 대한 한번의 선형해석으로 철근콘크리트 부재의 비탄성 설계를 수행할 수 있는 간략화된 직접 비탄성 스트럿-타이 모델 (simplified direct inelastic strut-and-tie model, 이하 S-DISTM)을 개발하였다. S-DISTM은 철근콘크리트 부재를 콘크리트 압축 스트럿과 철근 인장 타이로 모델링한다. 스트럿과 타이 요소는 설계자의 설계 전략에 따라 탄성강성 또는 할선강성의 선형 재료 모델을 사용한다. 스트럿과 타이 요소의 파괴 기준을 정의하기 위하여 콘크리트 압축파괴 및 철근 인장파단 등을 고려하였다. S-DISTM을 사용하여 깊은보, 연결보, 전단벽 등 다양한 전단지배 철근콘크리트 부재의 비탄성 설계를 수행하였고, 비탄성 설계로 결정된 철근양, 변형 능력 등을 기존 실험 결과와 비교하였다.

• 소성∙가공
• /
• 제6권3호
• /
• pp.239-249
• /
• 1997

The behaviour of alloys in the semi-solid state strongly depends on the imposed stress state and on the morphology of the phase which can vary from dendritic to globular. To optimal net shape forging of semi-solid materials, it is important to investigate for filling phenomena in forging process of arbitrarily shaped dies. To produce a automotive part which has good mechanical property, the filling pattern according to die velocity and solid fraction distribution has to be estimated for arbitrarily shaped dies. Therefore, the estimation of filling characteristic in the forging simulation with arbitrarily shaped dies of semi-solid materials are calculated by finite element method with proposed algorithm. The proposed theoretical model and a various boundary conditions for arbitrarily shaped dies is investigated with the coupling calculation between the liquid phase flow and the solid phase deformation. The simulation process with arbitrarily shaped dies is performed to the isothermal conditions of two dimensional problems. To analysis of forging process by using semi-solid materials, a new stress-strain relationship is described, and forging analysis is performed by viscoelastic model for the solid phase and the Darcy's law for the liquid flow. The calculated results for forging force and filling limitations will be compared to experimental data. The filling simulation of simple products performed with the uniform billet temperature(584$^{\circ}C$) from the induction heating by the commercial package MAGMAsoft. The initial step of computation is the touching of semi-solid material with the end of die gate and the initial concept of proposed system just fit with the capability of MAGMAsoft.

• 대한기계학회논문집
• /
• 제9권5호
• /
• pp.606-612
• /
• 1985

본 논문에서는 전보의 연속으로서 말단질량이 부착된 기둥의 자유단에 압축 종동력이 작용하는 비보존적 탄성계의 불완전 고정단에 나타나는 스프링 특성의 영향 을 연구하였다. 고정단은 병진스프링과 회전스프링으로 구속되었고, 이들 스프링 상 수의 여러 값이 말단질량과 연성(coupling)되어 기둥의 안정성에 미치는 영향을 연구 하였다. 기둥의 전단변형과 회전관성의 영향을 고려하였으며, Hamilton's principle 로서 계의 운동방정식과 경계조건의 식을 유도하여 수치해석하였다.

• 한국강구조학회 논문집
• /
• 제19권1호
• /
• pp.67-78
• /
• 2007

웨브강판의 상세에 따른 골조강판벽의 거동특성을 연구하기 위하여 실험 연구를 실시하였다. 실험체는 웨브강판에 스티프너를 사용하지 않은 3층 골조강판벽을 1/3 축소모델로 제작하였다. 주요 실험 변수는 골조와 웨브강판의 연결 상세로서, 용접접합과 볼트접합, 강판의 용접부위 및 길이, 연결강판벽이다. 골조강판벽 실험체들은 대체로 실험변수와 관계없이 우수한 강도, 변형능력 그리고 에너지소산능력을 나타냈다. 다만, 볼트접합을 사용한 강판벽은 강판의 전 모서리를 용접한 강판벽보다 다소 작은 변형능력을 나타냈다. 이러한 결과는 시공성과 경제성 향상을 위해 강판 구조성능의 큰 손실 없이 다양한 상세를 사용할 수 있음을 보여주었다. 본 연구의 실험결과와 해석결과를 토대로 다양한 상세를 갖는 강판벽 실험체의 강도 및 에너지소산능력을 예측할 수 있는 방법을 제시하였다.

• 한국결정성장학회지
• /
• 제15권3호
• /
• pp.108-113
• /
• 2005

부드럽지만 큰 변위를 발생시키는 생체모방 액츄에이터는 관심의 대상이 되어왔다. 특히, 듀폰사의 나피온 고분자는 작은 전기장하에서도 큰 변위를 나타내었다. 전기기계적 특성을 향상시키기 위하여 탄소나노튜브/고분자 나노복합체를 제조하였다. 다중 탄소나노튜브/나피온 나노복합체를 캐스팅법으로 제조하고 탄소나노튜브 첨가량에$(0{\sim}7wt%)$ 따른 나노복합체의 전기기계적 특성을 조사하였다. 탄소나노튜브가 첨가된 나노복합체는 탄소나노튜브가 없는 고분자 액츄에이터와 비교하여 우수한 탄성계수와 응력이 관찰되었다. 다중 탄소나노튜브의 첨가는 고기능성 생체모방 액츄에이터 특성을 증진시키는데 효과적이었다.

• 해양환경안전학회지
• /
• 제25권7호
• /
• pp.974-981
• /
• 2019

미세먼지발생 문제는 커다란 사회적 문제로 대두되고 있다. 선박에서는 주 추진 동력원으로 디젤엔진을 주로 사용하고 있다. 본 연구에서는 디젤엔진에서 발생하는 미세먼지로 알려진 입자상 물질을 줄이기 위해서 디젤엔진의 후처리시스템으로 사용 중인 DPF(디젤미립자 필터, Diesel particulate filter)를 소개하고자 한다. DPF의 소재로는 Cordierite와 SiC (Silicon carbide)의 두 가지가 사용되고 있다. 본 논문에서는 SiC DPF에 사용되는 접합제의 물성 향상을 위해서 기존 접합제로 사용된 SiC 계열의 물질 대신 코디얼라이트를 사용하여 열팽창계수 변화를 통한 고온 변형에 대한 열 내구성을 평가하였으며, 접합제와 Segment 사이의 결합을 결정짓는 바탕제에 주성분인 실리카졸의 pH 변화에 따른 물성 변화를 확인하였다. 이를 기반으로 실리카 졸의 반응성을 높이기 위해 Siline계 커플링제를 첨가하거나 SiC를 일부 첨가함으로써 접합제의 물성 변화의 영향에 대해서 실험을 통하여 확인하였다.

• Smart Structures and Systems
• /
• 제21권3호
• /
• pp.279-286
• /
• 2018

The free longitudinal vibration of a circular truncated nanocone is investigated based on the nonlocal elasticity theory. Exact analytical formulations for tapered nanostructures are derived and the nonlinear differential governing equation of motion is developed. The nonlocal small scale effect unavailable in classical continuum theory is addressed to reveal the long-range interaction of atoms implicated in nonlocal constitutive relation. Unlike most previous studies applying the truncation method to the infinite higher-order differential equation, this paper aims to consider all higher-order terms to show the overall nonlocality. The explicit solution of nonlocal stress for longitudinal deformation is determined and it is an infinite series incorporating the classical stress derived in classical mechanics of materials and the infinite higher-order derivative of longitudinal displacement. Subsequently, the first three modes natural frequencies are calculated numerically and the significant effects of nonlocal small scale and vertex angle on natural frequencies are examined. The coupling phenomenon of natural frequency is observed and it is induced by the combined effects of nonlocal small scale and vertex angle. The critical value of nonlocal small scale is defined, and after that a new proposal for determining the range of nonlocal small scale is put forward since the principle of choosing the nonlocal small scale is still unclear at present. Additionally, two different types of nonlocal effects, namely the nonlocal stiffness weakening and strengthening, reversed phenomena existing in nanostructures are observed and verified. Hence the opposite nonlocal effects are resolved again clearly. The nano-engineers dealing with a circular truncated nanocone-based sensors and oscillators may benefit from the present work.

• Geomechanics and Engineering
• /
• 제2권1호
• /
• pp.1-18
• /
• 2010

The analysis of structure response and design of buried structures subjected to dynamic destructive loads have been receiving increasing interest due to recent severe damage caused by strong earthquakes and terrorist attacks. For a comprehensive design of buried structures subjected to blast loads to be conducted, the whole system behaviour including simulation of the explosion, propagation of shock waves through the soil medium, the interaction of the soil with the buried structure and the structure response needs to be simulated in a single model. Such a model will enable more realistic simulation of the fundamental physical behaviour. This paper presents a complete model simulating the whole system using the finite element package ABAQUS/Explicit. The Arbitrary Lagrange Euler Coupling formulation is used to model the explosive charge and the soil region near the explosion to eliminate the distortion of the mesh under high deformation, while the conventional finite element method is used to model the rest of the system. The elasto-plastic Drucker-Prager Cap model is used to model the soil behaviour. The explosion process is simulated using the Jones-Wilkens-Lee equation of state. The Concrete Damage Plasticity model is used to simulate the behaviour of concrete with the reinforcement considered as an elasto-plastic material. The contact interface between soil and structure is simulated using the general Mohr-Coulomb friction concept, which allows for sliding, separation and rebound between the buried structure surface and the surrounding soil. The behaviour of the whole system is evaluated using a numerical example which shows that the proposed model is capable of producing a realistic simulation of the physical system behaviour in a smooth numerical process.

• Smart Structures and Systems
• /
• 제23권2호
• /
• pp.141-153
• /
• 2019

This research deals with wave propagation of the functionally graded (FG) nano-beams based on the nonlocal elasticity theory considering surface and flexoelectric effects. The FG nano-beam is resting in Winkler-Pasternak foundation. It is assumed that the material properties of the nano-beam changes continuously along the thickness direction according to simple power-law form. In order to include coupling of strain gradients and electrical polarizations in governing equations of motion, the nonlocal non-classical nano-beam model containg flexoelectric effect is used. Also, the effects of surface elasticity, dielectricity and piezoelectricity as well as bulk flexoelectricity are all taken into consideration. The governing equations of motion are derived using Hamilton principle based on first shear deformation beam theory (FSDBT) and also considering residual surface stresses. The analytical method is used to calculate phase velocity of wave propagation in FG nano-beam as well as cut-off frequency. After verification with validated reference, comprehensive numerical results are presented to investigate the influence of important parameters such as flexoelectric coefficients of the surface, bulk and residual surface stresses, Winkler and shear coefficients of foundation, power gradient index of FG material, and geometric dimensions on the wave propagation characteristics of FG nano-beam. The numerical results indicate that considering surface effects/flexoelectric property caused phase velocity increases/decreases in low wave number range, respectively. The influences of aforementioned parameters on the occurrence cut-off frequency point are very small.

• 한국지진공학회논문집
• /
• 제28권1호
• /
• pp.47-57
• /
• 2024

Recently, in newly constructed apartment buildings, the exterior wall structures have been characterized by thinness, having various openings, and a significantly low reinforcement ratio. In this study, a nonlinear finite element analysis was performed to investigate the crack damage characteristics of the exterior wall structure. The limited analysis models for a 10-story exterior wall were constructed based on the prototype apartment building, and nonlinear static analysis (push-over analysis) was performed. Based on the finite element (FE) analysis model, the parametric study was conducted to investigate the effects of various design parameters on the strength and crack width of the exterior walls. As the parameters, the vertical reinforcement ratio and horizontal reinforcement ratio of the wall, as well as the uniformly distributed longitudinal reinforcement ratio and shear reinforcement ratio of the connection beam, were addressed. The analysis results showed that the strength and deformation capacity of the prototype exterior walls were limited by the failure of the connection beam prior to the flexural yielding of the walls. Thus, the increase of wall reinforcement limitedly affected the failure modes, peak strengths, and crack damages. On the other hand, when the reinforcement ratio of the connection beams was increased, the peak strength was increased due to the increase in the load-carrying capacity of the connection beams. Further, the crack damage index decreased as the reinforcement ratio of the connection beam increased. In particular, it was more effective to increase the uniformly distributed longitudinal reinforcement ratio in the connection beams to decrease the crack damage of the coupling beams, regardless of the type of the prototype exterior walls.