• 한국군사과학기술학회지
• /
• 제8권1호
• /
• pp.62-68
• /
• 2005

In this paper, we review the general technique of Earned Value Management System(EVMS) which is the integrated management for cost, schedule and performance, and suggest an application of the integrated management of cost and schedule in the research and development(R&D) programs for defense acquisition.

• Bulletin of the Korean Chemical Society
• /
• 제34권6호
• /
• pp.1668-1672
• /
• 2013

We developed a standoff Raman detection system for explosive molecules (EMs). Our system was composed of reflective telescope with 310 mm diameter lens, 532 nm pulse laser, and Intensified Charge-Coupled Device (ICCD) camera. In order to remove huge background noise coming from ambient light, laser pulses with nanosecond time width were fired to target sample and ICCD was gated to open only during the time when the scattered Raman signal from the sample arrived at ICCD camera. We performed standoff experiments with military EMs by putting the detector at 10, 20 and 30 m away from the source. The standoff results were compared with the confocal Raman results. Based on our standoff experiments, we were able to observe the peaks in the range of 1200 and $1600cm^{-1}$, where vibrational modes of nitro groups were appeared. The wave numbers and shapes of these peaks may serve as good references in detecting and identifying various EMs.

• 품질경영학회지
• /
• 제45권3호
• /
• pp.309-326
• /
• 2017

Purpose: The purpose of this study is to propose useful idea and data by association analyzing MRA results of defense research and development. Methods: The collected data through the DTaQ MRA system are analyzed using three association analysis measurements. Results: The results of this study are as follows; some evaluation items are very highly associated according to confidence and lift. The result is also meaningful as contents of evaluation items. The result of this study suggests a direction for improvement of MRA system. Conclusion: Some evaluation items of MRA are meaningfully associated. Therefore, the result can support the improvement of MRA system.

• 한국군사과학기술학회지
• /
• 제23권3호
• /
• pp.286-293
• /
• 2020

Since Dr. Lipke announces earned schedule management(ESM) in 2002, it has been used in project management to make up for the insufficient schedule management function of earned value management technique. However, it is difficult to accurately forecast the schedule of delayed defense research and development(R&D) projects with the ESM technique. Therefore, this paper proposes a new schedule forecasting method considering the progress of delayed work in ESM technique. This concept can also be adopted to the traditional project progress management (PPM) technique. We verify the effectiveness of the proposed concept through several defense R&D projects and prove that it is possible to supplement the schedule forecasting of the ESM and PPM technique.

• 한국전자거래학회:학술대회논문집
• /
• 한국전자거래학회 1999년도 종합학술대회발표논문집
• /
• pp.85-92
• /
• 1999

The current R＆B system has a lot of problems caused by complexity of the system and lack of IDE concept among the related offices and organizations. IDE concept is building Integrated database with data which applied standards and digitalized. So R＆D CALS system should be established for the related offices and organizations can use data which created during R＆D life-cycle in IDE. In this paper, I suggested system requirements and system quality factors for building IDE based upon SSS form.

• 한국전자거래학회지
• /
• 제10권1호
• /
• pp.41-60
• /
• 2005

본 논문에서는 국방CALS의 구현을 위한 표준방법론인 ID EF1/1X를 무기체계 연구개발 절차에 적용하여 연구개발 수행과정에서의 연구목표, 정보의 입력, 산출, 제약조건에 대한 정보모델링을 제시하였다. ID EF1/1X를 실행하는 프로그램인 SmartER를 이용하여 연구개발 수행기관 내부에 존재하는 모든 정보자원의 관리에 대한 요구분석을 실시하여 관리해야 할 정보를 식별한 후 TO-BE모델에 대한 정보모델링을 제시한 것이다. ID EF 적용대상인 무기체계 연구개발의 절차는 개념연구, 탐색개발, 체계개발, 그리고 시제품 제작을 거쳐 연구개발 결과 보고서 작성 단계로 구성되어 있다. 본 연구의 정보모델링 결과로 무기체계 통합데이터베이스(IWSDB)를 이용하여 정보를 공유하고 연구개발업무를 수행하는 것을 제시하였다. 무기체계 연구개발사업과 같은 대형 체계개발 사업에 대한 프로세스의 효율성을 기하기 위해서 적절한 방법론으로 알려진 IDEF에 대한 본격적인 연구가 진행되어 국방CALS를 구현하는 계기가 되었으면 한다.

• 한국항공우주학회지
• /
• 제49권4호
• /
• pp.291-299
• /
• 2021

본 논문에서는 제어모멘트자이로 내 짐벌과 모멘텀 휠의 제어로직에 대해 기술하였다. 우선 소모전력과 안정도(이득여유, 위상여유)를 고려하여 모멘텀 휠의 제어로직을 설계하였다. 두 번째로는 진동흡수장치의 공진과 안정도를 고려하여 짐벌의 제어로직을 설계하였다. 세 번째로는 제어 모멘트자이로에서 발생하는 힘과 토크를 측정하기 위한 장치 구성에 대해 기술하였으며, 네 번째로는 모멘텀 휠과 짐벌의 주파수응답 및 시간응답 시험 결과를 나타내었다. 그리고 마지막으로 제어 모멘트자이로를 통해 발생한 힘과 토크를 실험적으로 측정하여 나타내었다.

• 한국군사과학기술학회지
• /
• 제20권4호
• /
• pp.579-586
• /
• 2017

The defense industry has become a global industry, and military technology is actively being traded between countries to increase their military capabilities. The Republic of Korea has been ranked one of the top 10 countries for exports of military technology. To maintain competitive advantages in the global defense industry, it is essential to protect key technologies employed by exported weapon systems. Various techniques have been developed for protection of confidential technologies in weapon systems, and the U.S. DoD has been leading the development of the protection techniques. This paper reviews current anti-tampering techniques that prevent leakage of key technology from weapon exportation or pillage. Based on the protection techniques employed by the U.S. DoD Anti-Tamper Executive Agent, this paper suggests novel design methods for protection of confidential technologies. The proposed design methods were tested on an actual weapon system.

• 한국군사과학기술학회지
• /
• 제27권2호
• /
• pp.285-293
• /
• 2024

This paper describes the interception using fine fragments and particles to hypersonic vehicles which have a vulnerability in thermal and pressure during glide-phase flight. This interception concept is based on the fast relative velocity and the flight vulnerability of hypersonic vehicles. For the density calculation of fragmentation and particle in interception, error analysis of end-phase was performed including radar, intercept missile and target maneuvering errors. In relation to the vulnerability and error analysis, the penetration characteristics of fine fragments in high temperature were analyzed. Presented the interception in glide-phase could be applied to the concept of horizontal multi-layer defense to hypersonic vehicles.

• 한국군사과학기술학회지
• /
• 제25권2호
• /
• pp.151-159
• /
• 2022

In this paper, we implement a digital multi-beamformer using FPGA(Field Programmable Gate Array) which has advantages in parallel and real-time data processing. This is accomplished through the use of not only high-speed data communication but also multiple beam forming, which is currently required by MFR(Multi Function Radar). As a result, the beamformer can process 24 Gbps throughput in real-time and form 5 digital beams at the same time. It is also compared to the results of Matlab simulations. We demonstrate how an implemented beamformer can be used in an MFR system by using a digital array antenna.