• 한국정보통신학회논문지
• /
• 제21권7호
• /
• pp.1429-1434
• /
• 2017

기존의 안경 렌즈 흠집 검출 방법은 영상내의 미세 잡음이 제거되지 않아 렌즈 영역이 정확히 추출되지 않는 경우가 발생하여 흠집 영역을 검출할 수 없다는 문제점이 발생한다. 따라서 본 논문에서는 이러한 문제점을 개선하기 위해 적응적 이진화 기법과 Bresenham algorithm을 적용하여 흠집 영역을 검출한다. 제안된 방법은 안경 렌즈 영상에서 명암 대비를 적용하여 렌즈의 명암을 강조한다. 명암이 강조된 영상에서 렌즈 밖의 배경 영역은 흠집 검출에 불필요하므로 이진화 기법을 적용한 후에 Bresenham algorithm을 적용하여 렌즈의 윤곽선을 검출하고 렌즈 이외의 배경을 제거한다. 렌즈 이외의 배경이 제거된 렌즈 영상에서 렌즈 내부의 배경과 흠집의 명암 대비를 높인다. 명암이 강조된 렌즈 내부 영역에서 적응적 이진화 기법을 적용하여 흠집과 잡음을 검출한다. 잡음은 중간값 필터를 적용하여 제거한 후에 흠집 영역을 추출한다. 추출된 흠집 영역에서 렌즈의 중심으로부터의 거리와 흠집의 크기를 퍼지 추론 규칙에 적용하여 눈에 미치는 영향 정도를 분석한다. 제안된 방법의 성능을 분석하기 위해 CHEMI, MID, HL, HM과 같은 시력 보정용 렌즈 영상을 대상으로 실험한 결과, 12개의 시력 보정용 렌즈 영상 중에서 10개에서 결함을 성공적으로 추출하였다.

• Archives of Plastic Surgery
• /
• 제32권4호
• /
• pp.521-528
• /
• 2005

The purpose of this research is to find out the degree of cartilage regeneration by inserting the atelo-collagen scaffold obtained from dermis of a calf on cartilage defect site. Dissection underneath the perichondrium by the periosteal elevator on both side of ears of six New Zealand white rabbits were made to expose the cartilage, leaving pairs of circular holes 3, 6, 9 mm width with punches. One hole was left for a control, and on the other hole atelo-collagen scaffold of the same size was transplanted. In postoperative 1, 2, 4 weeks, the tissues were dyed. The length of long axis of neocartilage was measured through an optical microscope with a 0.1 mm graduation at original magnification, ${\times}40$. In the first and second week, both group showed no sign of cartilage regeneration. In the fourth week, regeneration on marginal portions was observed on all groups and the average values of length of long axis of neocartilage according to defect size were as follows: In the cases with 3mm defect, it was $0.85{\pm}0.30mm$ in the control group, and $1.85{\pm}0.38mm$ in the graft group; in the cases with 6 mm defect, $1.33{\pm}0.58mm$ in the control group, and $2.25{\pm}0.46mm$ in the graft group; and in the cases with 9 mm defect, $2.33{\pm}0.77mm$ in the control group, and $4.47{\pm}1.39mm$ in the graft group. This means that the collagen scaffold has an influence on the regeneration of neocartilage. But the relative ratio of the length of neocartilage to cartilage defect size was not significant in the statistics.

• Archives of Reconstructive Microsurgery
• /
• 제25권2호
• /
• pp.25-28
• /
• 2016

Purpose: Reconstruction of small defects of the dorsal fingers and toes is a challenging task. Although adipofascial flap is widely used for these areas, additional refinements are warranted. In this paper, we define the appropriate defect size in the finger and toes that can be treated with the adipofascial flap, refine its surgical indications and present a few surgical tips. Materials and Methods: Twelve patients with dorsal defects of the fingers and toes were treated with a random-type adipofascial turn-over flap and skin graft. If the defect area exceeded the size that could be covered by a conventional design, the flap base was designed in oblique or curvilinear fashion to lengthen the flap. For accurate defect coverage, the width of the flap base was designed in an asymmetrical shape depending on the defect configuration, varying the width from 0.3 to 1.0 cm, as opposed to the standard 0.5 to 1.0 cm width. Moreover, the lateral limit of the flap was defined as the lateral axial line. The size of the defect ranged from $3.0{\times}1.7cm$ to $1.5{\times}1.3cm$. Results: All flaps survived completely. Gliding function of the hand was well preserved and there was no evidence of tendon adhesion. Conclusion: The small defect in the dorsal finger and toe can be defined as less than one phalanx-length, measuring about $3.0{\times}2.0cm$ in size. If the defect exceeds this dimension, it is recommended that a different option be considered. We believe the adipofascial flap is an excellent option for treating small defects.

• Nuclear Engineering and Technology
• /
• 제39권5호
• /
• pp.637-646
• /
• 2007

An UET (ultrasound excited thermography) has been used for several years for a remote non-destructive testing in the automotive and aircraft industry. It provides a thermo sonic image for a defect detection. A thermograhy is based On a propagation and a reflection of a thermal wave, which is launched from the surface into the inspected sample by an absorption of a modulated radiation. For an energy deposition to a sample, the UET uses an ultrasound excited vibration energy as an internal heat source. In this paper the applicability of the UET for a realtime defect detection is described. Measurements were performed on two kinds of pipes made from a copper and a CFRP material. In the interior of the CFRP pipe (70mm diameter), a groove (width - 6mm, depth - 2.7mm, and length - 70mm) was engraved by a milling. In the case of the copper pipe, a defect was made with a groove (width - 2mm, depth - 1mm, and length - 110 mm) by the same method. An ultrasonic vibration energy of a pulsed type is injected into the exterior side of the pipe. A hot spot, which is a small area around the defect was considerably heated up when compared to the other intact areas, was observed. A test On a damaged copper pipe produced a thermo sonic image, which was an excellent image contrast when compared to a CFRP pipe. Test on a CFRP pipe with a subsurface defect revealed a thermo sonic image at the groove position which was a relatively weak contrast.

• Journal of Chest Surgery
• /
• 제33권2호
• /
• pp.139-145
• /
• 2000

Background: The purpose of this study is to review the clinical course after the correction of noncomplicated ventricular septal defect and to analyze the morbidity and risk factors of postoperative complications and evaluate residual defect during the follow-up period. Material and Method: From September 1994 to June 1998 24 patients(median age 10 months) underwent surgery under the diagnosis of ventricular septal defect. We made a retrospective review of the clinical records including the operation notes critical care unit records echocardiography results and the follow-up records. Result: There was no early mortality nd late mortality. There was no postoperative complete conduction block. Respiratory complication was the most common complication. The body weight age type of ventricular septal defect associated anomalies and operative procedure were not related to the incidence of complications. residual ventricular septal defects aortic valve regurgitation and tricuspid valve regurgitation were insignificant in postoperative hemodynamics, Conclusions: Correction of the noncomplicated ventricular septal defect was done without mortality and complete heart block. Aggressive preoperative medical treatment and early surgical treatment may decrease postoperative complications. Postoperative residual shunt and tricuspid regurgitation were not problematic during the follow-up

• 공업화학
• /
• 제29권2호
• /
• pp.196-200
• /
• 2018

본 연구에서는 복합 수소분리막 중간층의 pin hole, crack 및 defect를 최소화하기 위하여 powder type과 sol type의 금속산화물을 이용하여 복합화하였다. 중간층의 표면 형상과 투과 특성은 주사전자현미경(SEM) 분석과 $N_2$ 투과도 테스트를 통해 평가하였으며, 제조한 수소분리막의 성능평가를 위해 $N_2$와 $H_2$를 이용하여 단일가스 투과 테스트를 수행하였다. Powder type과 sol type의 금속산화물을 각각 이용하여 중간층을 적층한 결과 sol type 금속산화물을 이용하여 적층한 중간층의 표면 조도가 매우 낮았으며, 특히 $TiO_2$ sol로 형성된 중간층의 pin-hole, crack 및 defect가 현저히 감소하였다. Powder와 sol을 복합화하여 적층한 중간층은 sol로 형성된 중간층과 거의 유사한 특성을 보였으며, 이를 기반으로 제조한 수소분리막은 1 bar의 압력구배, 672 K의 온도에서 약 $0.32mol/m^2s$의 수소 투과도를 나타내었으며, 선택도는 약 10,890 이상으로 측정되었다.

• Journal of Chest Surgery
• /
• 제11권3호
• /
• pp.342-347
• /
• 1978

A 8 year old male was admitted to the Department of Thoracic Surgery, Korea University Hospital on June 22, 1978. The chief complaints were cyanosis and exertional dyspnea since at birth. EKG shows BVH and dextrocardia, phonocardiogram revealed the accentuation of second heart sound in aortic area. Echocardiogram from the left ventricle to the base of the heart, there is a discontinuity between the ventricular septum and the anterior aortic margin with a large aortic root & aortic overriding. His cardiac catheterization data and cardiac angiogram shows situs inversus totalis, dextrocardia, right aortic arch, large ventricular septal defect etc., and finally diagnosed Truncus Arteriosus. Edwards type IV with retrograde aortogram and selective bronchial angiogram. This is the first operative case reported as Rastelli operation for Truncus Arteriosus type IV in the literatures in Korea. Authors have experienced I case of Truncus Arteriosus, Edward type IV and Rastelli operation with Dacron Arterial Conduit Graft under cardiopulmonary bypass on July 3, 1978. The procedures were as follows; 2] Cardiopulmonary bypass: Origin of bronchial arteries excised from descending aorta bilaterally; defects in aorta closed. 2] Horizontal incision made high in right ventricle. 2] Ventricular septal defect [Kirklin type I+II] closed with Teflon patch. 4] Bifurcated dacron arterial graft with pericardial monocusp sutured to the bilateral pulmonary arteries. [Diameter 9 mm: Length 7 cm]. 5] Proximal end of the conduit graft anastomosed to right ventricle. [Diameter 19 mm: Length 5 cm]..Total perfusion time was 220 min. The result of operation was poor due to anastomotic leakage and increased pulmonary vascular resistance resulting acute right heart failure. The patient was died on the operation table. Literatures were briefly reviewed.

• 한국건축시공학회지
• /
• 제20권4호
• /
• pp.357-365
• /
• 2020

국내 건설업에서 공동주택 입주물량은 지속적으로 증가하고 있는 가운데, 입주자들의 높은 수요에 부응하기 위해서 시설물 관련 기술 고도화, 평면모델 개선 및 발전 등 많은 노력을 기울이고 있다. 그러나 공동주택 시공과정에서 자재, 인력, 장비, 날씨 등 예측이 어려운 사항에 따라 다양한 하자가 발생할 수 있다. 이와 같은 하자는 준공 후 입주자 사전점검에서 발견되어 입주자들의 입주거부 또는 하자소송까지 이어지는 문제점이 발생한다. 따라서 본 연구는 입주자의 하자관련 민원발생 요소를 줄이고, 건설업체의 하자보수비용을 최소화하기 위해 공동주택에서 발생하는 하자의 유형별 중요도를 분석하는 연구이다. 하자의 유형별 중요도를 분석하기 위해 기존연구현황을 고찰하여 연구의 필요성을 도출하고, 국내 주요건설사 중 A건설사의 2010년 이후 입주한 공동주택 7개단지 5,280세대를 대상으로 '입주자 사전점검 결과'에 대한 하자유형별 빈도 분석과 하자보수 단가 조사를 통해 하자보수비용을 산출하여 하자유형별 중요도를 분석하였다. 하자유형별 중요도 분석한 결과, 타일·마루·도배·PL창호·일반가구·주방가구 등 상위 6개 공종이 중요도가 높은 것으로 나타나, 해당 상위 6개 공종은 최우선적으로 하자보수관리를 해야 하는 것으로 분석된다. 본 연구의 결과는 하자보수 지연에 대한 입주거부 및 하자소송과 같은 문제점을 초기 대응할 수 있는 계획수립에 도움될 것이다.

• Structural Engineering and Mechanics
• /
• 제9권2호
• /
• pp.195-208
• /
• 2000

To confirm the theory and static defect energy (SDE) equations proposed in the first part, extensive numerical simulation studies are performed in this portion. Stiffness method is applied to calculate the components of the stresses and strains from which the energy components and finally, the SDE are obtained. Examples are designed to cover almost all kinds of possibilities. Variables include structural type, material, cross-section, support constraint, loading type, magnitude and position. The SDE diagram is unique in the way of presenting damage information: two different energy constants are separated by a sharp vertical drop right at the damage location. Simulation results are successfully implemented for both methods in all the cases.

• The Journal of Korean Physical Therapy
• /
• 제15권4호
• /
• pp.24-33
• /
• 2003

Spondylolysis and spondylolisthesis are two conditions that directly involve changes in the vertebra. Spondylolysis is defined as a defect in the pars interarticularis, the region of the lamina between the superior and inferior articular facets. Progression of the defect can result in spondylolisthesis, which is defined as a subluxation or 'slippage' of two adjacent vertebrae. In the low back it occurs most commonly at the lumbosacral level; next in frequency is spondylolisthesis of the fourth lumbar vertebra on the fifth. To provide the reader with information about the aetiology and anatomical consideration of spondylolysis and spondylolisthesis type. Spondylolisthesis has recently been classified by Wiltse and others into five types based on the suspected aetiology; dysplastic, isthmic, degenerative, posttraumatic, pathologic and postsurgical. Of these five types, isthmic spondylolisthesi and degenerative spondylolisthesis, both of which are frequently associated with low back and lower limb pain.