• 제목/요약/키워드: Defect before inspection

검색결과 18건 처리시간 0.023초

냉각수 배관 용접부 평가를 위한 유도초음파 기술의 적용 (Application of Guided Ultrasonic Wave Technology for Evaluation of Welding Part in Cooling Water Pipe)

  • 길두송;안연식;박상기
    • 동력기계공학회지
    • /
    • 제14권5호
    • /
    • pp.36-40
    • /
    • 2010
  • The ultrasonic guided wave propagates along with the given structure's wall direction. Because of this specific character, the ultrasonic guided waves arc used in many other fields. Especially, it can be readily utilized for nondestructive inspection of various structures that are made up of gas pipes, heat exchanger tubes, and thin plates. Further, the guided wave technology can be readily utilized when inspecting pipes or thin plates which pose high risk of the accident but for which the nondestructive inspection itself is impossible because it is difficult to get to them since they are coated or buried underground. In the other hand, conventional ultrasonic testing such as thickness gauging uses bulk waves and only tests the region of structure immediately below the transducer. As a result of the application about inlet and outlet cooling water line using guided wave test, we conformed that the overall corrosions were in the lower side of the 304.8 mm inlet valve and these corrosions were engaged in not locally but through the lower side of the valve line. In the near future, we can expect that the detectable defect size is smaller than before along with the development of the sensing technology.

LPI차량에서 CKPS불량으로 주행 중 간헐적인 엔진부조 현상의 고장진단 (Case Study of Intermittent Engine Hesitation Fault Diagnosis By CKPS Fault)

  • 김성모
    • 한국생산제조학회지
    • /
    • 제23권6호
    • /
    • pp.624-629
    • /
    • 2014
  • The purpose of this study is to carry out the task of engine hesitation which occurred intermittently in driving due to the defective CKPS of LPI vehicles. As the result of the wrong data from the equipment of D-logger, the signal error of CKPS caused the engine hesitation. We performed a study in the followings to analyze and investigate the cause effectively. First, we have investigated the control wiring harness and connector pin contact defect inspection. Second, we have inspected the defection of CKPS separately. From this study, it was found that the engine hesitation were caused by the bad durability and we have showed how to diagnosis the fault of the engine hesitation intermittently while driving. Therefore, it is determined that we have to improve the durability of the CKPS through a strict quality control and to increase the reliability.

차량탑재형 고소작업대의 재해분석을 통한 취약 구조부의 안전성 향상 방안에 관한 연구 (A Study on the Safety Improvement of Structural Weakness Using Accident Analysis for Vehicle-Mounted MEWP)

  • 유용태;서수은;유희재;강경식
    • 대한안전경영과학회지
    • /
    • 제19권1호
    • /
    • pp.15-25
    • /
    • 2017
  • The findings were summarized as follows. The safety check by manufacturer showed that 6 of 13 companies are over the average occurrence of defects. It was expected that there would be a difference between manufacturing technology capability and production system of each manufacturer. Consequently, manufacturers should institutionally improve and strengthen certification items for the upward standardization of safety certification before factory. Second, the safety check by year showed that the results of this study accord with those of previous studies on defect time. Consequently, manufacturers should classify the 3-year-old equipment for vehicle-mounted MEWP into a special check subject to do a nondestructive test according to proven results, and also reflect the test in a safety test system to do regular preventive activities of equipment defects. Third, the safety check by part showed that the boom and outrigger parts of vehicle-mounted MEWP have the most defects. Stress concentration resulted in defects as the boom part was most frequently operated in the structural parts for a real work. To prevent this, it is suitable to improve the hardness of boom materials. The outrigger part needs improvement in safety devices with materials. As an outrigger supports the overturning moment of equipment, it is most affected by its load based on the operating radius, resulting in fatigue crack.

능동 램파 전파에 기초한 강판의 구조건전성 모니터링 (Active Lamb Wave Propagation-based Structural Health Monitoring for Steel Plate)

  • 정운;서주원;김형윤
    • 대한토목학회논문집
    • /
    • 제29권5A호
    • /
    • pp.421-431
    • /
    • 2009
  • 본 연구는 유도초음파를 기반으로 한 구조물 건전성 모니터링 알고리즘 검증에 관한 것이다. 유도초음파 중 램파를 기반으로 하는 능동검사시스템을 사용하였으며 본 알고리즘의 적용에 관한 기초연구로서 강판에 표면결함인 원형노치를 감지하는 실험을 수행하였다. Pitch-catch방법으로 강판 표면 원형노치에 대한 손상 탐상을 수행하여 손상전후의 $S_0$모드를 비교함으로써 손상 특성을 파악하며 손상전후 신호의 수학적 차에 의해 구한 산란램파(scatter)에 의해 손상을 평가할 수 있다. 손상전후 신호의 $S_0$모드 램파를 분석하기 위해서 연속 가보 웨이블릿 변환을 사용하여 전파시간을 구할 수 있다. 본 알고리즘은 손상모니터링 다각형과 Pitch-catch 방법을 기초로 하며 손상 위치표정값들의 평균과 표준편차에 의해 손상위치표정 및 크기를 정확히 추정 가능함이 검증되었다.

경성 실시간 태스크를 위한 확장된 스케줄 가능성 검사를 갖는 비율단조 스케줄러 (Rate-Monotonic Scheduler with Extended Schedulability Inspection for Hard Real-Time Tesk)

  • 신동헌;조수현;김영학;김태형
    • 한국콘텐츠학회논문지
    • /
    • 제4권2호
    • /
    • pp.50-60
    • /
    • 2004
  • 오늘날 대부분의 내장형 시스템은 목적상 많은 기능뿐만 아니라 실시간성도 함께 요구하고 있다. 특히, 경성 실시간 시스템에서는 주기 태스크들의 엄격한 마감시간 보장이 시스템의 성능을 좌우한다. 본 논문에서는 CPU 이용률이 놓아 비율단조 기법으로는 마감시간을 보장 할 수 없는 주기 태스크 셋을 위한 비율단조 기반의 스케줄러를 설계하고 구현한다. 이 스케줄러는 확장된 스케줄 가능성 검사를 실시하여, 태스크 셋의 수행 전태스크들의 공통주기를 찾아 마감시간 우선 기법을 기반으로 마감시간 보장 수행패턴을 생성한다. 이렇게 생성된 수행패턴을 참조하여 결정된 우선순위에 따라 태스크 셋을 실행하게 된다. 마감시간 우선 기법을 기반으로 생성된 패턴은 그 특성에 따라 CPU 이용률을 100% 까지 가능하게 하며, 수행패턴을 참조하여 수행함으로써 동적 우선순위 할당 기법의 단점인 실행시간 스케줄링 오버헤드를 없앨 수 있다.

  • PDF

표준 전자문서 이관 시 발생하는 무결성 보장 및 오류 해결에 대한 제언 (Suggestions for Solving Errors and Integrity Guarantees in the Process of Transferring Standard Electronic Documents)

  • 유영문
    • 한국기록관리학회지
    • /
    • 제20권3호
    • /
    • pp.1-21
    • /
    • 2020
  • 국가기록원은 2015년부터 보존기간 30년 이상의 표준 전자문서를 중앙행정기관으로부터 이관 받고 있다. 이 과정에서 다양한 종류의 오류와 비효율이 발견되었으나, 그 오류원인을 분석하고 문제해결을 위한 연구는 없었다. 본 연구를 통하여 이관 시 발견되는 대부분의 오류가 생산단계에서 발생하는 것을 확인하고, 이를 해결하기 위한 4가지 방안을 제안한다. 첫째, 전자문서를 결재하기 전에 본문 및 첨부 파일의 결함을 체크하여 오류를 사전에 방지한다. 둘째, 결재와 동시에 전자파일 단위로 전자지문을 생성 및 관리하여 무결성을 보장한다. 셋째, 이관 및 보존 과정에 전자지문 비교·확인 및 결함체크 절차를 적용하여 자동으로 무결성 검증 및 이관 검수를 수행한다. 넷째, 기록화 대상 기준 및 무결성 보장 기술 등이 생산단계에 제대로 적용되는지 관리 및 감독한다.

항만하역관할의 원인분석 및 예방대책에 관하여 (On the Countermeasure for Preventing the Accident of Cargo Handling in Port)

  • 박용욱;이철영
    • 한국항해학회지
    • /
    • 제17권3호
    • /
    • pp.57-68
    • /
    • 1993
  • The economy of Korea has grown up significantly in its scale. It has, therefore, become imperative to develop countermeasures to prevent work related injuries and occupational illnesses resultining from haza-rdous working conditions and handling harmful substances. A lot of cargo handling accident in port have occurred due to the characteristics of poor working environment, diversity of working place and method, fluctuation of the amount of cargo and handling of heavy, long, harmful and dangerous cargo, etc. According to '91 industrial accident analysis carried out by the ministry of labour, the number of the stevedores injured by cargo handling accident in port were 1, 432 persons (the death accident : 22 per-sons), the amount of industrial accident compensation in port was 6.7 billion won (the amount of economic loss : 33.6 billion won), and the injury occurance rate of the stevedoring industry was higher than that of the whole industry. This paper, therefore, aims to the actual status of the stevedoring industry and to extract the main cau-ses of the accidents related to cargo handling in port through factor analysis using the data of the accide-nts in the whole habour from 1990 to 1992, and to suggest the countermeasures to prevent such accident. The main causes of the accident and countermeasures are found to be as follows through the factor analy-sis : Factor1, factor2, and factor3 related to a defect of human being and management, a defect of state and environment, and an insufficiency of education and law are extracted. The short-term countermeasures to prevent these accidents are 1) to consolidate the safety and health organization in the working spot, 2) to secure a safe condition in working spot before dock work, 3) to strengthen a dock worker's safety educa-tion. The long-term countermeasures are 1) to promote a decasualisation of dock workers, 2) to modernize the cargo working methods through constructing exclusive pier and introducing exclusive cargo handling equipment, 3) to establish a exclusive dock accident prevention organization and the dock workers law. Factor 4, factor5, factor6, and factor7 related to an unfitness, a deficiency of technical knowledge, a nonfu-lfilment of safety measures, and a bad arrangement are extracted. The countermeasures to prevent these accidents are 1) to perform a complete safety inspection of cargo handling equipments and tools and to carry out the dock work according to a working plan, 2) to publish and supply technical safety books, safety instruction book, safety check list, etc., 3) to strengthen the safety patrol at the working spot in habour and to activate a safety fund, 4) to maintain always a clean workshop with the safety consciousness in which the good arragement of the working spot is considered to be the beginning of safety.

  • PDF

노거수 내부결함 탐지를 위한 비파괴 음파단층촬영의 신뢰성 분석(소나무·은행나무를 중심으로) (Reliability of Non-invasive Sonic Tomography for the Detection of Internal Defects in Old, Large Trees of Pinus densiflora Siebold & Zucc. and Ginkgo biloba L.)

  • 손지원;이광규;안유진;신진호
    • 한국환경생태학회지
    • /
    • 제36권5호
    • /
    • pp.535-549
    • /
    • 2022
  • 강풍, 폭우 등 이상기후의 대형화와 빈도 증가로 인해 나무가 부러지거나 쓰러지는 훼손이 증가하고 있으나 나무 내부의 공동, 부후 등 구조적 결함은 육안조사로 판별이 어렵기 때문에 예측을 통한 사전대응에 한계가 있다. 비파괴음파단층촬영은 나무에 미치는 물리적 훼손을 최소화하면서 내부결함을 추정하는 방법으로 내부결함 진단에 효율적이나 수종별 정확도에 차이가 발생하기 때문에 현장적용 전 측정결과의 신뢰성 분석이 선행되어야 한다. 이번 연구는 우리나라 대표 수종인 소나무와 은행나무 노거수를 대상으로 음파단층촬영의 신뢰성 검증을 위해 침입성 드릴저항 측정을 교차 적용하여 목재 내부결함을 측정하고 평가결과를 비교하였다. 두 집단 간 결함부 측정 평균값에 대한 t검정 결과 소나무는 통계적으로 유의한 차이가 없는 반면, 은행나무는 유의성에 차이가 있었다. 선형회귀분석 결과 두 수종 모두 드릴저항그래프의 결함이 증가할 때 음파단층영상 결함이 증가하는 양의 상관관계를 보였다.