• Journal of the Korean Institute of Gas
• /
• v.16 no.2
• /
• pp.18-24
• /
• 2012

This research seeks to evaluate damage on type II gas cylinder by an acoustic emission test when executing 20000 cycles fatigue test and thereafter burst test. Used gas cylinders in the experimental are three types as follows; one is sound cylinder, others are cylinders which contain longitudinal and transverse artificial defect. The size of artificial defect is a depth of 3 mm, width of 3 mm and length of 50 mm. In the case of the cylinder which artificial defect, unlike the expectation that it will burst in low pressure, the burst pressure of the cylinder did not differ much according to whether or not there were defects. However, when there was longitudinal defect, the location of burst was near the location of defect. This leads to the effect in which the thickness of the composite material becomes thinner according to the length of the longitudinal defect and this is judged to have an effect on the location of initiation and growth of crack in the liner. Also, for the acoustic emission signal, when there is longitudinal defect, the ratio of an event occurring at defect position among overall hits is more than 50 %, and the source location also accords very precisely with defect position.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.6 no.2
• /
• pp.76-82
• /
• 1997

The discrimination of flaw shape and sizing is very important subject in the material evaluation for semiconductor and new materials. The aim of this paper is to investigate the spectrum analysis of artificial defect signal captured from steel ball embedded in the resin. The results show that it can be evaluated quantitatively the size of artificial defect, from the amplitude variation of same frequency if the probe with same diameter and focal length is used. Comparing with the amplitude variation of the high frequency component and low frequency component obtained from the distance of defect center position, it can be estimated steel ball and flat bottm defect.

• Journal of Chest Surgery
• /
• v.11 no.2
• /
• pp.175-180
• /
• 1978

A rare form of tetralogy of Fallot, in which large ventricular septal defect was located at subpulmonary position rather than beneath a well developed crista supraventricularis was operated in this Department. This case satisfied the criteria for the diagnosis of tetralogy of Fallot, having large ventricular septal defect beneath the aortic valve with overriding of aorta, pulmonary stenosis and right ventricular hypeFtrophy. The operation was done through a median sternotomy using cardiopulmonary bypass. A vertical right ventriculotomy was extended to the pulmonary valve ring. Pulmonary and aortic valve were adjacent to each other, in contrast to the situation of classic tetralogy of Fallot. Pulmonary valvulotomy was done and ventricular septal defect was closed. with Teflon, and right ventricular outflow tract was reconstructed with woven Dacron covered by pericardial patch after minimal resection of septal band. The post-operatiove courses was uneventful except wound infection. The patient was discharged 15 days after open heart surgery.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2006.05a
• /
• pp.209-212
• /
• 2006

In this study, Support Vector Machine(SVM) and Artificial Neural Network(ANN) are used for developing the defect diagnostic algorithm of the aircraft turbo-shaft engine. Effect of altitude variation on the Defect Diagnostics algorithm has been included and evaluated. Separate learning Algorithm(SLA) suggested with ANN to loam the performance data selectively after classifying the position of defects by SVM improves the classification speed and accuracy.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.2
• /
• pp.146-153
• /
• 2003

Ultrasonic inspection of defects has been focused on the existence of defect in structural material and need has much time and expenses in inspecting all the coordinates (x, y) on material surface. Neural networks can have an application to coordinates (x, y) of defects by multi-point inspection method. Ultrasonic inspection modeling is optimized by neural networks Neural networks has trained training example of absolute and relative coordinate of defects, and defect pattern. This method can predict coordinates (x, y) of defects within engineering estimated mean error $\psi$.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.27-28
• /
• 2006

This study performs to investigate deformation of wall thinning pipe and to find out the position of the internal thinning defect by shearography. Shearography is one of optical methods those have applied to nondestructive testing (NDT) and the strain/stress analysis. This technique has the merit of the directly measuring the first derivative of displacement, sensitivity of which can be adjusted by the handling of optical component in interferometer. In this paper, we tested carbon steel pipe locally wall thinned and loaded internal pressure and developed the nondestructive out-of-plane deformation analysis technique fur internal thinning defect of elbow by shearography. From the results, it was confirmed that this technique is proper to the practical application on the pipe line system with internal defect.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.22 no.6
• /
• pp.637-642
• /
• 2002

An arc-shaped line array slit has been used for the laser generation of focused Lamb waves. The spatially expanded Nd:YAG pulse laser was illuminated through the arc-shaped line array slit on the surface of a sample plate to generate the Lamb waves of the same pattern as the slit. Then the generated Lamb waves were focused at the focal point of which distance from the slit position is dependent on the curvature of slit arc. The proposed method showed better spatial resolution than the conventional linear array slit in the detection of laser machined linear defect and drill machined circular defect on aluminum plates of 2mm thickness. Using the focused waves, we could detect the linear defect and the circular defect with the improvement of spatial resolution. The method can also be combined with the scanning mechanism to get an image just like by the scanning acoustic microscope(SAM).

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.4
• /
• pp.159-165
• /
• 2008

In this paper the signal analysis of eddy current test using transmit-receive(T/R) pancake coil of ECT array probe using electromagnetic finite element method(FEM) is performed. For characteristics analysis, the notch defect is used. The depth of defect is 40[%] of steam generator tube thickness, and inside defect and outside defect are used as simulation examples. The signal analysis is performed according to the variation of receive coil position. The receive coil is positioned $0[^{\circ}]$, $30[^{\circ}]$, $60[^{\circ}]$, $90[^{\circ}]$ of circumferential position of transmit coil. To obtain e electromagnetic characteristics of robes, the governing equation is derived from Maxwell's equations, and the problem is solved using the 3-dimensional finite element method. The signal magnitude of inside defect is bigger than that of outside defect, and the signal difference can be seen according to the variation of position of receive coil. The experimental signal and numerical signal of ASME standard tube show similar results. The results in this paper can be helpful when the ECT signals from ECT array probe are evaluated and analyzed.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.381-388
• /
• 2003

The material deficiencies in the form of pre-existing defects can initiated cracks and fractures. The stress distribution and fatigue crack initiation life of engineering materials may be associated with the size, the shape and the relative location of defects contained in the component. The objective of this study is to investigate the effect of arbitrarily located hole defect around the rivet hole of a wing section in monolithic aluminum and Al/GFRP laminates under cyclic bending moment during a service load. The stress distribution and the fatigue crack initiation behavior near a rivet hole of on the relationships between stress concentration factor ($K_t$) and relative position of defects were considered. The test results indicated the features of different stress field. Therefore, the stress concentration factor ($K_t$) and the fatigue crack initiation behavior was illustrated different behavior according to each position of hole defect around the rivet hole in monolithic aluminum and Al/GFRP laminates.

• Journal of Chest Surgery
• /
• v.46 no.3
• /
• pp.230-233
• /
• 2013

While a diaphragmatic rupture commonly results from trauma to the abdomen and chest, a spontaneous diaphragmatic rupture is very rare. A 68-year-old male presented with chest pain that had originated while doing farm work in a squatting position. Images revealed a 5 cm defect of the left diaphragmatic dome, and the entire stomach was displaced into the thorax. The diaphragmatic defect was round and half had a well-demarcated margin. The remaining fragile tissue was completely excised and was closed primarily. The patient was uneventfully discharged and resumed with a normal diet 10 days after the operation.