• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.921-924
• /
• 2008

We investigated new deep blue emitting materials including a novel side group such as CB-203. CB-203 shows relatively 40% increased PL quantum efficiency and higher Tg of $30^{\circ}C$ compared to MADN. It exhibits high External Quantum Efficiency (EQE) of 7.18% that is two times bigger than MADN's, which is the best efficiency in case of non-doped blue fluorescence OLED device to our knowledge. And deep blue emitting materials with a new core structure (CB-301) have been synthesized. CB-301 exhibit excellent blue fluorescence properties. Undoped OLED devices using CB-301 as blue emitters was found to deep blue CIE value (0.154, 0.078) and exhibit high luminance efficiencies of 2.01cd/A at $10\;mA/cm^2$.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.188-191
• /
• 2009

A high efficiency deep blue phosphorescent organic light-emitting diode (PHOLED) was developed using a new wide triplet bandgap host material (PPO1) with a phenylcarbazole and a phosphine oxide unit. The wide triplet bandgap host material was synthesized by a phosphornation reaction of 2-bromo-Nphenylcarbazole with chlorodiphenylphosphine. A deep blue emitting phosphorescent dopant, tris((3,5-difluoro-4-cyanophenyl)pyridine)iridium (FCNIr), was doped into the PPO1 host and a high quantum efficiency of 17.1 % and a current efficiency of 19.5 cd/A with a color coordinate of (0.14,0.15) were achieved in the blue PHOLED. The quantum efficiency of the deep blue PHOLED was better than any other quantum efficiency value reported up to now.

• Korean Journal Plant Pathology
• /
• v.11 no.2
• /
• pp.101-106
• /
• 1995

Deep blue fluorescence of resorcin blue-stained callose was observed only in the potato leafroll virus (PLRV)-infected potato plants, but not in other potato viruses investigated. The plant sections stained with aniline blue showed non-specific fluorescence regardless of PLRV infection, which means that aniline blue is not suitable for the staining of callose induces by PLRV infection. The fluorescence of resorcin blue-stained callose was more easily detectable than autofluorescence by a direct fluorescence detection method because of its deep blue color. The lateral branch of lower leaves was turned out to be the best material for fluorescence observation of all plant parts tested. In comparison of diagnostic efficacy of this technique to enzyme-linked immunosorbent assay (ELISA), PLRV infected potato plants showed corresponding increment of the fluorescence of resorcin blue stained callose as absorption values in ELISA increased. In the future, the criteria measuring the fluorescence objectively are thought to be determined for the practical application to the diagnosis of potato leafroll disease.

• Journal of Environmental Science International
• /
• v.26 no.3
• /
• pp.393-399
• /
• 2017

In order to determine the optimal water intake point, the distribution of blue-Green algae and water quality factors in relation to the depth of the Mulgum and Maeri stations located downstream of the Nakdong River were investigated from Jun. 2015 to Sep. 2016. When the current surface water intake system was converted to the deep water intake system, Chl-a concentration and blue-Green algae were reduced by 64.1% and 80.5%, respectively. Microcystin-LR was reduced by 50% to 100%, while geosmin and 2-MIB of the odorant substances were reduced by 42.9% and 11.8%, respectively. The water quality factors such as pH, water temperature, TOC and COD were gradually decreased by 30% in deep water. Therefore, if we used the deep water intake system selectively in the summer season when blue-Green algae masses occur, the concentration of the influx of blue-green algae and its by-products can be expected to decrease, leading to reduced operation costs in tap water production and improved of raw water quality.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.486-488
• /
• 2009

High efficiency deep blue and pure white phosphorescent organic light emitting diodes were developed using a new deep blue phosphorescent dopant, tris((3,5-difluoro-4-cyanophenyl)pyridine) iridium (FCNIr). A high quantum efficiency of 9.1 % with a color coordinate of (0.15, 0.16) at 1,000 cd/$m^2$ was obtained in the deep blue device and a high quantum efficiency of 15.2 % with a color coordinate (0.30, 0.32) was obtained in the pure white organic light-emitting diodes. The quantum efficiency of the pure white device is the best quantum efficiency value reported in the pure white device up to now.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.6
• /
• pp.1639-1646
• /
• 2014

A series of novel fused-ring spiro compounds, spiro[benzo[ij]tetraphene-7,9'-fluorene] (SBTF) derivatives containing an end-capping aryl substituent at both the C3 and C10-positions hasbeen designed and synthesized via multi-step Suzuki coupling reactions. 3-(1-Naphthyl)-10-phenylSBTF (1N-PSBTF), 3-(2-naphthyl)-10-phenylSBTF (2N-PSBTF) and 3-[4-(1-naphthyl)phenyl]-10-phenylSBTF (NP-PSBTF) showed improved glass transition temperatures ($T_g$) with good thermal stability. Their photophysical, electrochemical, and electroluminescent properties were investigated and were used to construct blue organic light emission diodes (OLEDs). The typical OLED devices showed excellent performance; the NP-PSBTF-based device exhibited highly efficient deep blue-light emission with a maximum efficiency of 5.27 cd/A (EQE, 4.63%) with CIE (x = 0.133, y = 0.144). According to these characteristics, these deep-blue light emitting materials have sufficient potential for fluorescent OLED applications.

• Journal of Information Display
• /
• v.10 no.3
• /
• pp.107-110
• /
• 2009

Efficient deep-blue organic light-emitting diodes were demonstrated using 4,4'-bis(9-ethyl-3-carbazovinylene)-1,1'-biphenyl doped in double-emission layers (D-EMLs). The D-EML system, which consists of 2-methyl-9,10-di(2-naphthyl)anthracene and 1,4-(dinaphthalen-2-yl)-naphthalene as blue hosts, was employed to broaden the recombination zone and to ensure the good confinement of the holes and electrons. The optimized device showed a peak current efficiency of 4.47 cd/A, a peak external quantum efficiency of 4.09%, and Commission Internationale de L'Eclairage coordinates of (0.16, 0.10).

• Archives of design research
• /
• v.15 no.4
• /
• pp.327-336
• /
• 2002

This paper is intended to help cool-skin-colored people to choose suitable clothing colors confidently and look well-dressed and to make positive self-images. A pseudo-experimental method has made it possible to analyze the visual evaluations of clothing color images for cool-skin-colored people and obtain the following results. 1. Reddish colors of vivid tone for doffing give positive images and those of dull and dark tone, negative ones. 2. Yellowish colors of vivid and bright tone for doffing show positive images and those of dull and dark tone, negative ones. Cool yellow of light tone proves to contribute to a well-looking image. 3. Warm green of vivid and deep tone, and cool green of vivid tone for clothing present positive images. 4. Warm blue of vivid and deep tone, and cool blue of vivid and bright lone make positive images. Either blue with dull tone gives a negative image. 5. Purple colors whose tone is vivid, deep and light contribute to positive images, and those of dull tone, negative ones.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.46 no.3
• /
• pp.59-68
• /
• 2023

Currently, yellow phosphor of Y3Al5O12:Ce3+ (YAG:Ce) fluorescent material is applied to a 450~480nm blue LED light source to implement a white LED device and it has a simple structure, can obtain sufficient luminance, and is economical. However, in this method, in terms of spectrum analysis, it is difficult to mass-produce white LEDs having the same color coordinates due to color separation cause by the wide wavelength gap between blue and yellow band. There is a disadvantage that it is difficult to control optical properties such as color stability and color rendering. In addition, this method does not emit purple light in the range of 380 to 420nm, so it is white without purple color that can not implement the spectrum of the entire visible light spectrum as like sunlight. Because of this, it is difficult to implement a color rendering index(CRI) of 90 or higher, and natural light characteristics such as sunlight can not be expected. For this, need for a method of implementing sunlight with one LED by using a method of combining phosphors with one light source, rather than a method of combining red, blue, and yellow LEDs. Using this method, the characteristics of an artificial sunlight LED device with a spectrum similar to that of sunlight were demonstrated by implementing LED devices of various color temperatures with high color rendering by injecting phosphors into a 405nm deep blue LED light source. In order to find the spectrum closest to sunlight, different combinations of phosphors were repeatedly fabricated and tested. In addition, reliability and mass productivity were verified through temperature and humidity tests and ink penetration tests.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.2
• /
• pp.513-517
• /
• 2014

Two donor-acceptor-donor monomers such as 3,5-bis(4-bromophenyl)-1,2,4-oxadiazole (BOB) and 3,5-bis(5-bromothiophen-2-yl)-1,2,4-oxadiazole (TOT) incorporating electron transporting and hole blocking 1,2,4-oxadiazloe moiety were copolymerized with light emitting fluorene derivative via Suzuki polycondensation to afford two new polymers, PFBOB and PFTOT, respectively. The optical studies for polymers PFBOB and PFTOT revealed that the band gaps are 3.10 eV and 2.72 eV, respectively, and polymer PFBOB exhibited a deep-blue emission while polymer PFTOT showed blue emission in chloroform and as thin film. The photoluminescence quantum efficiencies (${\Phi}_f$) of polymers PFBOB and PFTOT in chloroform calculated against highly blue emitting 9,10-diphenylanthracene (DPA, ${\Phi}_f=0.90$) were 1.00 and 0.44, respectively.